Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Receptor DUPLEX REX 7 Slim 2.4EX
114.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
2 x	CellPRO 4S Adaptader (GP/KO up to 4S)
3 x	Carbon blade 230 mm
1 x	T-shape holder metal LAMA
2 x	Flybar support metal LAMA
2 x	Shaft sleeve LAMA
1 x	Blade holder metal LAMA
2 x	Motor mount EDGE 540 48"
1 x	Rocket cardboard tube 25mm x 24mm x 230mm
1 x	Coversion set HIROBO EX/EAGLE elektro
1 x	Propeller POWER-PROP 7x7
2 x	Cargador para AA/AAA Ni-MH & Ni-Cd
1 x	RH long aluminium horn (2pcs)
1 x	ABS tube 5.0x4.0x156 mm
1 x	ABS tube 20.0x18.0x1000 mm
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	Partall paste 650 g
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	20 g tin paste
2 x	ABS tube 8.0x6.0x1000 mm
2 x	PVC 0,08 qmm Futaba servos wire (5 m)
2 x	Flat washer 1.7 mm (20 pcs)
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	ABS tube 3.0x2.0x330 mm
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
2 x	PVC 0,25 qmm servos wire Graupner (5 m)
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Profile ABS half cane 2.0x1000 mm
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Power supply NT 25 Amp.
2 x	Aluminium wide washer M3 blue (4 pcs)
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Jeti Black cap
2 x	Flat washer 3.2 mm (20 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x	Mini-Pix Esc 15 Amp
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	ABS angle 10,0x10,0x1000 mm
2 x	Silicone red 0,25 mm² wire (25 m)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Nitroverdu 500 ml
1 x	6 mm aluminium horn with patella
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
2 x	Brass control horn M3 short for wire (2 pcs)
1 x	Small aluminium horn gold (2pcs)
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	TA1200 Charger Compatible with Smart and Standard LiPo Batteries
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	Cargqador GensAce IMARS III Pro Smart Balance RC
1 x	Painting GHT Lexan Black 150 ml
1 x	Stickers-digit for marking
1 x	Silicone 0,35 qmm servos wire Futaba (100 m)
1 x	ABS tube 8.0x7.0x1000 mm
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Silicone 0,50 qmm servos wire Graupner(5 m)
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Solvent Plasti Dip 1000 ml
1 x	L-Connector 1.5 mm x 1000 mm
1 x	SyRen 10A 6V-24V Regenerative Motor Driver
1 x	Silicone 0,35 qmm servos cable Futaba (5 m)
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
2 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	Spray YELLOW Inca Lexan 150ml
1 x	White silicone 0,25 qmm wire (150 m)
1 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Extension silicon 30 cm female (Futaba)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	One touch canopy lock
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Metalic nose for PROJETI
2 x	Charger LiPo Charger4
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Couple M4 for wire (10 pcs)
1 x	Angled clevis with threaded rod M3
1 x	Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x	Silicone 0,25 qmm servos wire Graupner (5 m)
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
2 x	Lock washer 2.7 mm (20 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	ABS tube 5.0x3.0x1000 mm
1 x	Resistor 3W 5% OR82
1 x	Ventus 1:4 set of instruments
1 x	PRO-HV Dual Action Valve
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Trailing leg 131 mm
1 x	Hose connector stopper 4 mm
1 x	Horn 5/20 with M2 Bearing
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	2,3 mm Prop Adapter M5
1 x	Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	Adapter 2,3 mm M5 for spinner 30 mm fixed propeller
1 x	6 mm Prop Adapter M8
1 x	Adapter 3,2 mm M6
1 x	Adapter 4,0 mm M8
1 x	3,2 mm Prop Adapter M5
1 x	12 mm dogdrive props
1 x	Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x	Fiberglass tube 6/4x1000mm
1 x	Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Lock nut aluminium M2 (4 pcs)
1 x	Hexagonal Nut M4 (10 pcs)
1 x	Long horn 50x26
1 x	Silicone red 0,5 qmm wire ( 25 m)
1 x	Short adjustable control horn 3x24
1 x	Short extra-strong control horn with bearing 2,8x15
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	Micro control horn T2 Ø 1
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	Lock nut aluminium M2.5 (4 pcs)
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	Silicone black 6,0 qmm wire (25 m)
1 x	Profile ABS half cane 8.0x1000 mm
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Profile ABS triangular 2.0x1000 mm 90º
1 x	Profile ABS Square 1 x 1000 mm
1 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x	ABS tube 4.0x2.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Resistor 3W 5% OR47
1 x	3 mm Long Prop Adapter M5
1 x	Hexagonal Nut M3 (10 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	Horn 5/10 with M2 Bearing
1 x	Horn for flap control (1 pcs)
1 x	Seoul Power LED 3 watts PCB Sets: 1x white, 1x red, 1x green
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Quicklock washer 3 mm (10 pcs)
1 x	USB Charger 12V DC for car
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Horn 6/35 with M3 Bearing
1 x	M3-M4 rubber washer (8 pcs)

3,351.95EUR