50.00EUR 15.90EUR

Mini-Pix Esc 15 Amp
[KON4002]


This products have a good performance and can ensure high efficiency (90% including when you're operatting under full gas avoiding overheating and flight time low) and competing with explosion engine's performance.

General features:
- Only for brushless motors.
- Soft start that rapidly rise up to the maximum power (providing security).
- RPM control for the velocities of drifts and the main rotor, great for travel in and out of the maneuvers.
- Auto-Programmable mode (APM) that automatically adjusts the variator to the radio's gas channel and sets the strength of stopping, and current and fast start limitations.
- Supply limitation.
- High performance microprocessor design thas controles the heat dissipation.
- Overheatting protection.
- Superflex high temperature cables.
- You can work with or without sensorizar engines.

Pix variator features:
- The new Pix variators are effective and low-cost; they're designed for brushless motors and replace Swing Kontronik series. The desig is entirely new. Compared with their predecessors, this variators have new and improved performance characteristics.

- The operation has been reduced to essentials things. Do not you know anything about timing / frequency? No matter; you don´t have to be an expert in engines to manage your Pix. Like their predecessors, the Pix variators, adapt themselves automatically to the engine. Thanks to their APM mode, there is no need to program it. You can concentrate on the basics: connecting the battery and fly! It's that easy!

- All variators come with a Pix Li-Po integrated that can turned on and off simply by pressing a button. In fact, a major goal in its design, was to build the variator optimized to work with rotary engines of a large number of poles like Kontronik Dancer.

- The Pix variators are an attractive alternative in cost, compared to Jazz Kontronik if you do not want any specific function such as strong BEC, unlimited partial load condition or high voltage input.

- Moreover, now the PIX drives are programmed through the interface ProgCARD.


few units
few units

Reviews

Customers who bought this product also purchased
Propeller Pleg CAM Carbon 6x3
Propeller Pleg CAM Carbon 6x3

few units
few units

AXI2203/40 VPP
AXI2203/40 VPP

few units
few units

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
    Brushless->
      Aero-Naut
      Hacker
      Jeti->
      KAVAN
      Kontronik->
        Accesorios
      MGM
      Otros
      RIPMAX
      ROI-Import
      Top Model
      YGE
    Brushed
    Program Cards
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x DG-303 ACRO 3750 mm (Airworld)
1 x SHK 4000 mm Scale 1:4.25, V-Tails
1 x Kobuz 5000 mm (Airwold)
2 x DISCUS 2A De Luxe 3.750 mm (Topmodel)
2 x LS-8 GFK 6m Glider
3 x Fox MDM 1 4000 mm Std.
3 x Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models)
1 x Swift 5050 mm (Airwold)
2 x LO 100 ARC 3.3m,frame canopy
1 x Ventus 2cx 4.5 m
1 x LO 100 ARC 3.3m
1 x Elevator VENTUS 2cx 4.5m
1 x Fox MDM 1 6000 mm
1 x Swift S1 De-luxe 3.140 mm
1 x ASK 21 6.5m + pylona
1 x LUNAK 4,00 m
1 x Fox 4000 mm with flaps (Airwold)
1 x Ventus 2cx 4.5 m de Luxe
1 x Fournier RF-4D
2 x LO 100 Scale 1:2 - Modellbau Bruckmann
1 x SAGITA Alsema 4.0 m
2 x GP 15 JETA
2 x BLANIK 50 V2 Silver/Blue (SebArt), cabina
1 x DG-303 ACRO 3750 mm, winglets
1 x Fox MDM 1 4000 mm DeLuxe,Panel instrument Fox MDM 4m
2 x Fox 4000 mm Airworld,canopy frame
1 x Fox MDM 1 4000 mm DeLuxe,cabina
1 x BLANIK 50 V2 Silver/Blue (SebArt)
1 x LIBELLE Standard 3.8m D-box H-201
1 x ASH 31 Mi Scale:1/3 - 7m, elevator
2 x DG-303 ACRO 3750 mm, canopy
1 x BLANIK 50 V2 Silver/Orange (SebArt)
1 x Fox MDM 1 4000 mm DeLuxe,wing joiner
1 x Fox MDM 1 4000 mm DeLuxe
1 x ASH 31 6.08m Composite Hollow Molded
1 x Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe
2 x X-RAY Micro QR
2 x X-RAY Micro QR (Elevator)
3 x Chili Race F3K (aramid nose)
2 x X-RAY Micro QR (Rudder)
1 x Chili Race F3K 2 wing servo mounted(carbon biax)
4 x X-RAY Micro QR (Fuselage with canopy)
1 x ASW 15 5000 mm (Airwold)
1 x GRAFAS MAXI ARF
1 x Swift S1 De-luxe 3.730 mm
1 x SOLOFOX 5m Voll-GfK
1 x Gasket electric Fuel Pump
1 x Secraft Fuel system v2, red color
1 x Sparkplug 1/4-32
1 x Bujia OS G5 gasolina
1 x 1000 ccm gasoline fuel tank
1 x "Taxi Tank" Fuel Tank
1 x Servo KST MS825 V8.0 35kg 8.4v
1 x ANGEL 48" pp orange/black/white
1 x Hose clips 6 mm
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Propeller POWER-PROP 7x7
1 x Charger LiPo Charger4
1 x Crystal Universal RX 35.140 Ch 74
1 x Flybar support metal LAMA
2 x X-RAY Micro QR (Tail Tube)
1 x MAMBO 17
1 x Mini-Pix Esc 15 Amp
1 x Mudguard wheels 112/127 mm
1 x Trailing leg 131 mm
3 x Mini neumatic retract 4 mm landing gear (Het-rc)
2 x Quick hose connector 4-4 mm
1 x Quick hose connector 6-4 mm
1 x Refueling Cup V2 Red
1 x Bidule 111 3000 mm
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
1 x Set freno para ruedas Dia. 127 mm
1 x Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x Metal ring front FEMA
1 x Axle wheel with accesories
1 x Set montaje amortiguador para modelos 8-16 Kg
1 x Hose connector stopper 4 mm
1 x Neumatic retractable landing gear (Aero-Naut)
1 x Landing gear retract neumatic (Jet Legend)
1 x Charger 220/110v
1 x Mini neumatic retract landing gear
1 x 120x60 mm SLH KOVO wheel
2 x Tubo silicona transparente 7 x 3 mm (1m)
1 x SINGLE FUELING VALVE GASOLINE MK2 SMALL
1 x Simple take for fuel tank
1 x Quick hose connector 3-3 mm
2 x T-Hose connector 3-3-3 mm
2 x T-Hose connector 4-4-4mm
1 x Tank gas KUZA 500 cc
1 x Refueling Cap V3 Black
1 x Tygon tube 4.8 x 3.2 mm 15 m
1 x Refueling Cup V2 Blue
1 x Polyurethan FESTO hose 3x0,5 mm, transparent
1 x Tygon tube 6.35 - 3.18 mm 1m
1 x Tygon tube 9.53 x 6.35 mm 15 m
1 x Tubo silicona transparente 3.5 x 2 mm (1m)
1 x Refueling Cap V3 (RED)
1 x Tank gas KUZA 260 cc
1 x Reductora IPS 150 DX2BB-BXCS 7:1
1 x T- Fittings red color (2pcs)
1 x PILATUS PC-6 Turbo Porter 33% 5.290 mm
1 x Programador FUTABA USB CIU-3
1 x Servo FUTABA BLS175 SV
1 x Futaba BLS152 - Upper Case
1 x JEEMO Kit ARF Basic (2 color) - XTRALIGHT
1 x XICOY X45 rail
1 x Walbro carburetor for MVVS 26/30/35/40 cc
1 x Cooler motor type 280
1 x Servo FUTABA BLS173 SV
1 x Suction funnel for carburetor WALBRO 20-80cc (blue)
1 x Extension Arm for Carburetor
1 x Suction funnel for carburetor DA70- MVVW 190cc (red)
1 x Suction funnel for carburetor 90D-L (red)
1 x Reed valve for DA 50-R
1 x EME 55 cc carburetor WALBRO
1 x DLE 55 carburetor
1 x Motor OS 3820-1200 electric
1 x Indoor Brushed motor kit
1 x Mini DART 2 F3K carbon light 1m Green
1 x RS-200 Touch Programmer
1 x JP Hobby ER-120 Tricycle Full Set with Brakes (JSM Xcalibur Ripm
1 x ER40eVo set B (20 Kg)
1 x Retract Landing gear ER40 Combo Xcalibur complete
1 x Blades 330mm
1 x Electric Fuel Pump 12v
1 x GM Propellers Spinner Scale ø 42mm Diameter, Motor shaft ø 6mm C
1 x Sparkplug NGK CM6
1 x Spinner fold propeller 38 mm (white spare spinner)
1 x CN-Spinner propeller pleg. 36 mm / 6 mm
1 x Spinner propeller pleg. 38 mm / 4 mm
1 x Propeller CFK 17x18
1 x Gearbox for VM motors (2,5:1)
1 x Tygon tube 4.8 x 3.2 mm 1m
1 x Radial heatsink for MPJ AC25/35-xx motor
78,383.32EUR
Manufacturers
Manufacturer Info
KontroniK
KontroniK Homepage
Other products
Languages
Español English
Currencies