57.90EUR 39.90EUR

Glases Nimbus
[CMNIMBUS]



Set de gafas, cristales y trapo

Funda (inclu�da) para guardar todo
The Nimbus polarised set represents our top-of-the-range frame. Nimbus sunglasses have been specifically designed and manufactured for radio controlled modellers, with interchangeable lenses for different light conditions - with the Category 0 yellow lenses fitted, you can even enjoy the benefits of light enhancement on a cloudy day.

Polarised sunglasses greatly reduce glare, which is an effect caused by light hitting horizontally flat surfaces. Polarised lenses filter out this light to greatly enhance your visibility.

Other manufacturers of interchangeables rarely offer polarised lenses as standard - they certainly don't give you TWO sets for your money! For that reason, we believe our Nimbus glasses are some of the best value sports sunglasses on the market for ANY sport.

Featuring 100% UVA / UVB protection, these polycarbonate glasses benefit from an especially high-quality, wrap-around frame design that blocks unwanted and annoying light and wind from the sides. The scratch-resistant lenses are de-centred, which negates the possibility of distortion caused by the lens curvature. Conforming to US ANSI Z80.3 and British and European safety standard EN1836, our sunglasses are subjected to a drop-test at the factory, and offer great protection against flying debris should you suffer a mishap. All of our glasses carry the renowned European Union 'CE' compliance mark.

The interchangeable lenses are: yellow (category 1) low light - these actually enhance light and contrast; beige (category 2), polarised, average sunlight; (category 3) polarised, bright sunlight; dark smoked (category 4), very bright conditions.

All glasses come with 4 x sets of lenses as standard, a cleaning cloth and a carry case with belt clip and internal compartments for housing the extra lenses. Our latest stock also includes a neck / head strap.


enought units
enought units

Reviews

Customers who bought this product also purchased
Metal clevis M2 (10 uds)
Metal clevis M2 (10 uds)

enought units
enought units

Connectors banna oro 2 mm (M/F)
Connectors banna oro 2 mm (M/F)

enought units
enought units

Servo HITEC HS-55
Servo HITEC HS-55

enought units
enought units

Threaded coupler M2 (10 uds)
Threaded coupler M2 (10 uds)

enought units
enought units

Short ball link M2 (6 uds)
Short ball link M2 (6 uds)

enought units
enought units

500 ccm complete gasoline fuel tank
500 ccm complete gasoline fuel tank

enought units
enought units

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Lock washer 3.2 mm (20 pcs)
1 x M3-M4 rubber washer (8 pcs)
1 x Quicklock washer 3.5 mm (10 pcs)
1 x Flat washer 2.2 mm (20 pcs)
1 x Spring lock washer 2.6 mm (20 pcs)
1 x Quicklock washer 1 mm (10 pcs)
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x Spring lock washer 3.1 mm (20 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Quicklock washer 2.5 mm (10 pcs)
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x Aluminium cap bolt washer M4 red (8 pcs)
2 x Quicklock washer 4 mm (10 pcs)
1 x Circlik for shaft 1.5 mm (10 pcs)
1 x Flat washer 3.2 mm (20 pcs)
1 x M3 black washers (4 pcs)
1 x Big-Malibu XL Roof box with surfboard rack GREY
1 x Optical RPM Sensor
2 x DYNAMOMETER S-1580
1 x Gold antispark 4 mm plug
1 x XH female balance (4S) connector (2 pcs)
1 x Connectors DEANS 4 pins (1 pair)
1 x XH male balance (5S) connector (2 pcs)
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
2 x Connectors banna oro 8,0 mm 5 pcs(Female)
2 x Connectors banna oro 6,0 mm (M/F)
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x XH male balance (3S) connector (2 pcs)
2 x Connectors banna gold 5,5 mm (M/F)
1 x Wing connector 8pin with pin strip, plug & socket
1 x MPX Sub-D Adaptor
1 x Conector Servo female 4 pines
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
2 x Locking cable tie 2.5x100 (uds)
1 x SUS wire 3m (nylon coated)
2 x Cierre cabina aluminio Ø4, I=10 mm
1 x Locking cable tie 3.2x142 (uds)
2 x Crimping sleeves for cable 0.85 mm (10 pcs)
2 x Stainless steel cable Ø 0.62 mm (10 m)
2 x Stainless steel cable Ø 0.5 mm (20 m)
2 x Cockpit plastic closing
1 x Steering arm 16 mm Ø 3 mm
3 x Canopy Latch
1 x Cap closure 33/23.5mm (2 uds)
2 x Strip 2,0x2,0x330 mm
1 x ABS Strip 1.5x4.0x1000 mm
2 x ABS Strip 1.0x5.0x1000 mm
1 x Strip 1,5x1,5x330 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x Round Rod 1,0x1000 mm
3 x ABS Strip 1.5x2.0x1000 mm
2 x ABS Strip 1.5x3.0x1000 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x Round Rod 1,25x1000 mm
2 x ABS I Strip 10x5x1000 mm
2 x Strip ABS 2.0x5.0x1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x Pan Head Screw M2x8 PH
1 x Hexagonal Nut M2.5 (10 pcs)
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Quicklock washer 1.5 mm (10 pcs)
1 x 120x60 mm SLH KOVO wheel
1 x Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
2 x Protector Connector MPX (1 pair)
1 x MPX screwable clips (4 pcs)
1 x Soporte carbono MR30 (2 pcs)
1 x Flat washer 2.7 mm (20 uds)pcs)
1 x XT-30 connector (pair)
1 x XT-60 connector (female)
1 x Connectors banna oro 4 mm (M/F)
1 x Cabin latch Fox MDM1 4m (pair)
1 x 11 mm Rubber pads (14 pcs)
1 x XH male balance (9S) connector (2 pcs)
1 x Conector JR Servo female (50 pcs)
1 x Conector BEC male (10 pcs)
1 x Connectors banna oro 2 mm (M/F)
1 x Optotronix Aurora Plug
1 x Conector MR-60 (pareja)
1 x Connectors MPX 8 pins (green) 1 pair (male-female)
1 x Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x Connectors banna oro 3 mm (M/F)
2 x Cierre cabina aluminio Ø5, I=16 mm
1 x XH female balance (8S) connector (2 pcs)
1 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x Cable tie mounts 4.3 (4 uds)
1 x Banna gold connector 2,5 mm (M/F)
1 x Conector BEC female (10 pcs)
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x XH female balance (9S) connector (2 pcs)
1 x Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x Conector FUTABA Servo female (10 pcs)
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x Conector JR Servo male (10 pcs)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x MR30 connector female
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Stainless steel cable Ø 0.5 mm (10 m)
2 x Strip 2,5x1,25x330 mm
1 x Strip ABS 2.0x3.0x1000 mm
1 x ABS Strip 1.0x3.0x1000 mm
1 x Round Rod 2,0x1000 mm
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Nut for mounting M4 (4 pcs)
1 x Nut for mounting M6 (4 pcs)
1 x Screw M2x6 (10 pcs)
1 x Pan Head Screw M2x8 PH countersunk head
1 x Screw M2x8 (10 pcs)
1 x Screw M3x16 (10 pcs)
1 x Quicklock washer 2 mm (10 pcs)
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Support Pitot JETI
1 x Support pumb/filter Xicoy X45
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x ABS Strip 1.5x8.0x1000 mm
1 x Round Rod 6,0x1000 mm
1 x ABS Strip 1.0x4.0x1000 mm
1 x Round Rod 4,0x1000 mm
1 x Round Rod 3,0x1000 mm
1 x Race Outboard MERCURY type A
1 x 10 mm dogdrive props
1 x 45 mm flag mast
1 x 290x4 mm M4 shaft ship
1 x BOX-Setup Actro-marine
1 x 12 mm mast holder
1 x 12 mm portholes (10 pcs)
2 x ULTIMATUM 2.0 m white
1 x Tailwheel for 60/120 size
1 x ULTIMATUM 2.0 PRO "McLAren"
1 x Tailwheel for 20/60 size
1 x ULTIMATUM 2.0 PRO "Full Carbon Red"
1 x ULTIMATUM 2.0 m orange/blue
1 x Tailwheel for F3A size
1 x VIPER JET 2.2m + Electric landig Gear Deco: 01 Red-Blac-kWhit
1 x Tailwheel for 40/90 size
2 x Tail wheel for 5-8 kg models
1 x Tail wheel for 8-12 kg models
1 x 28 mm tailwheel unit
1 x ULTIMATUM 2.0 m green/black
1 x ULTIMATUM 2.0 m Red Bull
2 x ULTIMATUM 2.0 m red/black
1 x Silicone 0,35 qmm servos wire Futaba (100 m)
1 x Propeller CFK 14x8 Slim
1 x Propeller CFK 14x7
1 x Pan head screw M2x16 PH
1 x Propeller Pleg CAM-Prop 10x6 + Spinner
1 x Propeller CFK 12.75x13
1 x Propeller CFK 14x6.5
1 x Propeller CFK 12X6
1 x 3-blades 21x12carbon prop Super Silence
1 x PIN Connector female (100 pcs)
1 x 1000 ccm gasoline fuel tank
1 x Propeller POWER-PROP 10x6
1 x Connectors MPX black male
1 x Soporte filtro FESTO (4 pcs)
1 x Support Filtro FESTO
1 x ABS I Strip 20x10x1000 mm
1 x Antenna MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro
1 x Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
1 x Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled
1 x XH male balance (6S) connector (2 pcs)
1 x Rocket cardboard tube 50mm x 48mm x 250mm
1 x Split M1,2x10 (10 pcs)
1 x Conector JR Servo male (50 pcs)
1 x Wing tips support for AX-18/AX-60 (2 pcs)
1 x Landing gear frontal support 29x26x13,5
1 x Snap long M2 (10 uds)
1 x 24x14 prop Super Silence
1 x Propeller POWER-PROP 13x8
1 x Connectors MPX male
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Propeller electric carbon 9.5x5
1 x Propeller electric carbon 9.5x6
1 x Propeller electric carbon 10.5x8
1 x 20cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x 15x7 tree blades propeller
1 x Mounting frame MPX male connector
1 x 50cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x EASYGLIDER 4 RR
1 x Interruptor SAFET-SWITCH 12HV Twinbatt
1 x MULTIPLEX - TUNING SPINNER (67MM) FOR MULTIPLEX FUNRACER
1 x USB Charger 120-240V AC
1 x Alu servo arm double RHINO
1 x Wingstabi 9 DR M-Link Receiver
1 x Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x 15 cm PTFE-tubing for 25 mm tubes
43,837.74EUR
Manufacturers
Languages
Español English
Currencies