1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x ROOKIE 20Amp (25) A controller
1 x Regulador Actro-Marine 80A
2 x Regulador NAVY 540R
2 x Motor ACTRO 35-4-790
2 x Race Outboard MERCURY type A
1 x SC NAVY V15R
2 x BOX-Setup Actro-marine
1 x Reguladro ACTROCON 60A
1 x Motor ACTRO 35-4-1100
1 x Aluminium sheet 500x250x0,5mm
1 x Spinner fixed propeller 42 mm / 5,0 mm
1 x Receiver replacement antenna, approx. 15
1 x MZ-10, 5 Channel HoTT
1 x Flap hinge 33x9 mm (6 pcs)
1 x Decorative caps, multicoloured, short
1 x Spikes Band (5 m)
1 x Propeller hub spacer 8/5.5
1 x MZ-18, 9 Channel HoTT
1 x Flap hinge (6 pcs)
1 x 40 mm 1/4" Race propeller (rigth hydropropeller)
1 x Foam plastic plates (310x210x2 mm)
1 x Transmitter GRAUPNER MZ-24 Pro
1 x Spinner fixed propeller 60 mm / 5,0 mm
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Beech dowels 4.0 x 1000 mm
1 x Charger LiPo Charger4
2 x Regulador Actro-Marine 60A
1 x Motor ACTRO 28-4-880
1 x Robbe Modellsport ROOKIE 35 ESC FOR BRUSH MO TORS
1 x Distanzstück motor OS 120 AX
1 x Hose clips 6 mm
1 x Quadcopter Q50 Kit Carbon Fiber
1 x Motor ACTRO 28-3-1300
1 x DJI Mavic Air Fly More Combo
1 x Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x SERVO DES 707 BB MG, Pignons
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x SERVO DES 588 BB MG
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x 28 mm tailwheel unit
1 x Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x One touch canopy lock
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Electric spoiler 250 mm (2 pcs)
1 x Steering arm 12 mm Ø 4 mm
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x SE Ring 450 mm (2 pcs)
1 x SE Ring 200 mm (2 pcs)
1 x T-Motor MN705-S Kv125 (pack 2 uds)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Locking cable tie 4.6x203 (uds)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Steering arm 16 mm Ø 4 mm
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Locking cable tie 3.2x142 (uds)
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Cabin latch Fox MDM1 4m (pair)
1 x Steering arm 16 mm Ø 3 mm
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Locking cable tie 2.5x100 (uds)
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Canopy Latch
1 x SUS wire 3m (nylon coated)
1 x Screw-lock connector M2 (2 uds)
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Cap closure 33/23.5mm (2 uds)
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Cinta Goldfix 1m
1 x SE Ring 250 mm (2 pcs)
1 x DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV)
1 x KONDOR 15-92
1 x DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV)
1 x Propeller balancer
1 x Motor PERMAX BL-O 3520-920 (Extra 330 SC)
1 x Spare Part Frame Set for EACHINE RACER 250
1 x Motor brushless 1806 - 2300 Kv Cuadracopter
1 x EDGE 540-A 105" (2660 mm)
1 x ASH 31 Mi Scale:1/3 - 7m
1 x ARS 300 91" ARF 2311mm ORANGE
1 x Axle for AXI 2820/xx motors
1 x TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible
1 x APM2.6 Power module with 5.3V DC BEC
1 x Beech dowels 3.0 x 1000 mm
1 x 20x200 mm battery rings
1 x SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x Axle for AXI 4120/xx motors
13,574.84EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies