Top » Catalog » Hardware » Connectors » SETPCBMPX

6.00EUR

MPX PCB "Gender-Changer (5 pcs)
[SETPCBMPX]

- Adapter PCB, which allows for directly soldering of MPX connectors
- Using the PCB, adapter male <> female or similar can be build
- Used as "in between connector", e.g. the voltage of a connected battery can be measured during operation
- Simply isolate with heat shrinkable tube
- Weight: 3g

temporarily out of stock

Reviews

Customers who bought this product also purchased

Wing bolts M3 Steel screw Red (2 pcs) temporarily out of stock	20x1000 mm Ring Strap Back To Back temporarily out of stock	Support 45% Hopper JetsMunt temporarily out of stock
XH male balance (4S) connector (2 pcs) temporarily out of stock	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) temporarily out of stock	Lead with adhesive (2 pcs) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Beaver DHC-2 DeHavilland 3000mm White/Black CYMODEL
975.02EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	ROOKIE 20Amp (25) A controller
1 x	Regulador Actro-Marine 80A
2 x	Regulador NAVY 540R
2 x	Motor ACTRO 35-4-790
2 x	Race Outboard MERCURY type A
1 x	SC NAVY V15R
2 x	BOX-Setup Actro-marine
1 x	Reguladro ACTROCON 60A
1 x	Motor ACTRO 35-4-1100
1 x	Aluminium sheet 500x250x0,5mm
1 x	Spinner fixed propeller 42 mm / 5,0 mm
1 x	Receiver replacement antenna, approx. 15
1 x	MZ-10, 5 Channel HoTT
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Decorative caps, multicoloured, short
1 x	Spikes Band (5 m)
1 x	Propeller hub spacer 8/5.5
1 x	MZ-18, 9 Channel HoTT
1 x	Flap hinge (6 pcs)
1 x	40 mm 1/4" Race propeller (rigth hydropropeller)
1 x	Foam plastic plates (310x210x2 mm)
1 x	Transmitter GRAUPNER MZ-24 Pro
1 x	Spinner fixed propeller 60 mm / 5,0 mm
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Beech dowels 4.0 x 1000 mm
1 x	Charger LiPo Charger4
2 x	Regulador Actro-Marine 60A
1 x	Motor ACTRO 28-4-880
1 x	Robbe Modellsport ROOKIE 35 ESC FOR BRUSH MO TORS
1 x	Distanzstück motor OS 120 AX
1 x	Hose clips 6 mm
1 x	Quadcopter Q50 Kit Carbon Fiber
1 x	Motor ACTRO 28-3-1300
1 x	DJI Mavic Air Fly More Combo
1 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x	SERVO DES 707 BB MG, Pignons
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	SERVO DES 588 BB MG
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	28 mm tailwheel unit
1 x	Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	One touch canopy lock
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	SE Ring 450 mm (2 pcs)
1 x	SE Ring 200 mm (2 pcs)
1 x	T-Motor MN705-S Kv125 (pack 2 uds)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Locking cable tie 4.6x203 (uds)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Steering arm 16 mm Ø 4 mm
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Steering arm 16 mm Ø 3 mm
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Canopy Latch
1 x	SUS wire 3m (nylon coated)
1 x	Screw-lock connector M2 (2 uds)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Cinta Goldfix 1m
1 x	SE Ring 250 mm (2 pcs)
1 x	DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV)
1 x	KONDOR 15-92
1 x	DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV)
1 x	Propeller balancer
1 x	Motor PERMAX BL-O 3520-920 (Extra 330 SC)
1 x	Spare Part Frame Set for EACHINE RACER 250
1 x	Motor brushless 1806 - 2300 Kv Cuadracopter
1 x	EDGE 540-A 105" (2660 mm)
1 x	ASH 31 Mi Scale:1/3 - 7m
1 x	ARS 300 91" ARF 2311mm ORANGE
1 x	Axle for AXI 2820/xx motors
1 x	TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible

12,096.01EUR