50.00EUR 15.90EUR

Mini-Pix Esc 15 Amp
[KON4002]


This products have a good performance and can ensure high efficiency (90% including when you're operatting under full gas avoiding overheating and flight time low) and competing with explosion engine's performance.

General features:
- Only for brushless motors.
- Soft start that rapidly rise up to the maximum power (providing security).
- RPM control for the velocities of drifts and the main rotor, great for travel in and out of the maneuvers.
- Auto-Programmable mode (APM) that automatically adjusts the variator to the radio's gas channel and sets the strength of stopping, and current and fast start limitations.
- Supply limitation.
- High performance microprocessor design thas controles the heat dissipation.
- Overheatting protection.
- Superflex high temperature cables.
- You can work with or without sensorizar engines.

Pix variator features:
- The new Pix variators are effective and low-cost; they're designed for brushless motors and replace Swing Kontronik series. The desig is entirely new. Compared with their predecessors, this variators have new and improved performance characteristics.

- The operation has been reduced to essentials things. Do not you know anything about timing / frequency? No matter; you don´t have to be an expert in engines to manage your Pix. Like their predecessors, the Pix variators, adapt themselves automatically to the engine. Thanks to their APM mode, there is no need to program it. You can concentrate on the basics: connecting the battery and fly! It's that easy!

- All variators come with a Pix Li-Po integrated that can turned on and off simply by pressing a button. In fact, a major goal in its design, was to build the variator optimized to work with rotary engines of a large number of poles like Kontronik Dancer.

- The Pix variators are an attractive alternative in cost, compared to Jazz Kontronik if you do not want any specific function such as strong BEC, unlimited partial load condition or high voltage input.

- Moreover, now the PIX drives are programmed through the interface ProgCARD.


few units
few units

Reviews

Customers who bought this product also purchased
AXI2203/40 VPP
AXI2203/40 VPP

few units
few units

Propeller Pleg CAM Carbon 6x3
Propeller Pleg CAM Carbon 6x3

few units
few units

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
    Brushless->
      Aero-Naut
      Hacker
      Jeti->
      KAVAN
      Kontronik->
        Accesorios
      MGM
      Otros
      RIPMAX
      ROI-Import
      Top Model
      YGE
    Brushed
    Program Cards
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Propeller G-Sonic 20x8
2 x Decorative caps, multicoloured
1 x Spikes Band (5 m)
3 x Transmitter GRAUPNER MZ-24 Pro
2 x MZ-12, 6 Channel HoTT
1 x Spinner fixed propeller 60 mm / 5,0 mm
2 x 40 mm 1/4" Race propeller (rigth hydropropeller)
2 x Propeller Pleg CAM-Prop 8x6
1 x Transmitter Crystal 35 Mc/s Ch 77
2 x Flap hinge (6 pcs)
1 x Quick hose connector 6-4 mm
4 x Adjustable brass horn threaded M3
2 x Spinner fixed propeller 42 mm / 5,0 mm
2 x Foreman, scale 1:32
1 x Aluminium sheet 500x250x0,5mm
3 x Beech dowels 4.0 x 1000 mm
1 x Flap hinge 33x9 mm (6 pcs)
1 x Canopy Latch
1 x Receiver replacement antenna, approx. 15
1 x 40,0 mm hydro-propeller (left hydropropeller)
1 x Coupling bush 5 - 5 mm
1 x Beech dowels 3.0 x 1000 mm
1 x Conector JAPAN G2 Set 5 pares
2 x Distanzstück motor OS 120 AX
1 x Propeller hub spacer 8/5.5
2 x Mini Infrared Thermomiter
2 x Receiver Crystal 35 Mc/s Ch 62
1 x Aramid 50 daN 50 m
2 x SERVO DES 707 BB MG, Pignons
1 x Switching module high voltage SXH
3 x Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x Foam plastic plates (310x210x3 mm)
1 x Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
2 x Servo HBS 690BB HV Digital
1 x Brass rod Ø 0.5 mm x 1000 mm
2 x Brass hexagonal rod Ø 3 mm x 1000 mm
3 x Propeller Pleg CAM-Prop 10x6 + Spinner
2 x SERVO DES 588 BB MG
2 x Foam plastic plates (310x210x2 mm)
2 x Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x Foam plastic plates (310x210x8 mm)
3 x 28 mm tailwheel unit
2 x Ring 320 mm length (5 pcs)
1 x Beech dowels 2.0 x 1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
2 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x SATORI 2 PRO V C64 F5J
1 x HERON RR
1 x Propeller POWER-PROP 7x7
1 x 120x60 mm SLH KOVO wheel
2 x Xplorer4 anemometro
1 x Canopy Sweet / Siesta
1 x ASH 31 Mi Scale:1/3 - 7m
1 x Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models)
1 x X-RAY Micro QR (Rudder)
1 x BABY glider drawings (Aero-naut)
1 x Fascination 3600 mm (Top Model)
1 x Fascination 3600 mm ARC
1 x TAKEO 3.6m electric
1 x FOX 2.300 mm V2 PNP (FMS)
1 x X-RAY Micro QR (Fuselage with canopy)
1 x Gracia Maxi ARF (Top Model)
1 x SERVO DES 806 Pignons
1 x VARIO module Hott
1 x Contest-S-Pult-Carbon mc-20/mc-24
1 x Receptor GRAUPNER GR-24 HoTT
1 x 
1 x Blades 330mm
1 x SERVO DES 707 BB MG
1 x Manometer 4 mm
1 x Receiver GRAUPNER GR-16 HoTT
1 x SERVO DES 806 Pignons
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x Receiver GRAUPNER GR-12 HoTT
1 x Bearing block for noseleg landing gear
1 x MZ-18, 9 Channel HoTT
1 x Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Decorative caps, multicoloured, short
1 x Hose clips 6 mm
1 x DINO Glider ARC
1 x X-RAY Micro QR
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x White gelcoat 1 Kg
1 x BETA 1400 ARF Red
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x Glider KNIRPS
1 x Mould Resin P 10 kg
1 x EXTRA 300 78" V3 Orange/Blue
1 x resin-hardener L-385 H-385 (1250 g)
1 x 45 mm aluminium spinner (Kavan)
1 x Debonder CA 20g
1 x Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x Charger SKY RC e680
1 x Crawler GRE-24 RTR 1:24 Arena
1 x Birch plywood plate 600x300x1.5 mm
1 x Concave-Convex sandpaper file 13 mm
1 x 150 mm inflatable superlight deluxe wheel (2 pcs)
1 x Conector MR-60 (pareja)
1 x BETA 1400 RTF Red
1 x 60 mm aluminium spinner (Kavan)
1 x Ciano KAVAN Super Thin 20g
1 x Combustible Glow "KAVAN" air/heli 15% nitro
1 x 25 mm Sandpaper file
1 x Ball Bearing Oil 25 ml
1 x Cable coupler M2 (10 uds)
1 x 10 mm aluminium spinner (Kavan)
1 x 50 mm aluminium spinner (Kavan)
1 x Conector MT-60 (pair)
1 x Adaptadores carga 6s JST-XH
1 x 
1 x Combustible Glow "KAVAN" air/heli 5% nitro
1 x Combo KAVAN C3536-1250 + KAVANA R50SB +
1 x Xplorer2 anemometro
1 x Xplorer1 anemometro
1 x Xplorer3 anemometro
2 x Ion Pro, Wing joiner (JP Model)
2 x THERMIK XXXL 4,9m CFK Electric
2 x Q-12 2000 mm Electric
2 x Prelude ARF 2500 mm (TopModel)
2 x XENON RC (Aero-naut)
1 x Ion Pro, Fuselage (JP Model)
22,589.27EUR
Manufacturers
Manufacturer Info
KontroniK
KontroniK Homepage
Other products
Languages
Español English
Currencies