139.90EUR

ROBB1-F1959
[VASHET70068]


The HET Typhoon 700-68 series brushless motors are designed for 90 mm fan units that demand the ultimate in performance. The 700-68 series offers high power output for 90mm edf fan units. The 700 series motors will work with the Schubeler DS-51 and HET 9305-700 fan units. These motors will not work with WeMoTec Midi Fan or the HET 9305 fan unit. The fan comes with a heat sink and tools for mounting.

SPECIFICATIONS:
◾KV Rating: 2250
◾Rm (Ohm): 4.6
◾Io (A): 2.2A(10V)
◾Weight: 330 g
◾Length: 67.5 mm
◾Continous Watts: 1400
◾Max Watts: 2500
◾Li-Po Packs: 5 to 7S
◾Diameter: 39 mm
◾Shaft Dia.: 5 mm
◾Poles: 4

Recommened Advance Timing: Low
Comes with Heat Sink

WARNING: Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Yellow smoke bombs AX-60 (5 pcs)
1 x AX-60 starters (5 pcs)
1 x Electric rocket starters (6 pcs)
2 x Blue smoke canister 100 g
1 x PCARD Wireless System
1 x Parachute expulsion foam
1 x White smoke canister 65 g
2 x Green smoke canister 140 g
1 x Remote electric ignition system
2 x B4-0 rocket charges (6 pcs)
2 x Smoke set "M"
1 x White smoke bombs AX-18 (5 pcs)
1 x Initior Transmitter FTX2 Wireless
1 x Green smoke canister 65 g
1 x White smoke canister 140 g
2 x Green smoke canister 100 g
1 x Blue smoke canister 140 g
1 x Smoke set "Glider"
1 x White smoke canister 100 g
1 x U Profile ABS 8,0x4,0x1000 mm
2 x ABS "T" angle 10.0x10.0x1000 mm
2 x L-Connector 4.0 mm x 1000 mm
2 x ABS angle 3,0x3,0x1000 mm
1 x U Profile ABS 2,0x4,0x1000 mm
2 x ABS angle 5,0x5,0x1000 mm
1 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x Profile ABS Square 4 x 1000 mm
1 x Profile ABS half cane 2.5x1000 mm
1 x Profile ABS Square 3 x 1000 mm
2 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x Profile ABS half cane 2.0x1000 mm
1 x L-Connector 1.5 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
2 x Horn 6/20 with M3 Bearing
2 x Horn 6/27 with M3 Bearing
1 x Horn 5/10 with M2 Bearing
1 x 6 mm aluminium horn with patella
1 x Small aluminium horn gold (2pcs)
1 x 6 mm red aluminium threaded horn with patella
2 x Horn 16,5x20 mm (2 pcs)
1 x Horn 5/15 with M2 Bearing
1 x Brass control horn M4 short for wire (4 pcs)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Brass control horn M3 short for wire (2 pcs)
1 x Brass control horn M4 short for wire (10pcs)
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x Extension silicon 10 cm (Graupner)
1 x Ferrita 17x10x6.5 mm
1 x Straightened threaded rod M2-1m
1 x Paint gun for sprays
1 x Carbon plate 350x150x1.0 mm
1 x Red smoke canister 140 g
1 x White smoke bombs AX-3 (10 pcs)
1 x "M" set
1 x "S" set for planes
1 x Yellow smoke canister 65 g
1 x ABS angle 6,0x6,0x1000 mm
2 x Profile ABS half cane 6.0x1000 mm
2 x ABS rectangular profile 12x6.0x1000 mm
1 x Flat Connector 4.0 mm x 1000 mm
2 x Profile ABS triangular 4.0x1000 mm 90º
2 x U Profile ABS 3,0x6,0x1000 mm
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x Horn DU-BRO 1/2 (2 pcs)
1 x Horn DUBRO 1/2A
1 x Horn 20x28,5 mm (2 pcs)
1 x Extra-long adjustable aluminium control horn 2,8x34
1 x Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs)
1 x Brass control horn M2 large for wire (2pcs)
1 x Horn mando long (2 pcs)
1 x Control horn long w/ball
1 x Horn with ball 40x30
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x Horn 13,5x16 mm (2 pcs)
1 x Joint with bearing M2,5 22x5,5
1 x Long ball link M3 (6 uds)
1 x Blue metalic ball link M2/2 azul (2 pcs)
1 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x Socket head long ball link M3 (6 uds)
1 x Ball link M3 (6 uds)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Aluminium wide washer M3 red (4 pcs)
1 x 45 mm rods set for direction control
1 x 140 mm rods + T patellas set for direction control
1 x Allen wheel collar M3x5
1 x Cable grommet 9.5 mm (4 uds)
1 x Servo MKS HV6130
1 x Brazo servo MKS X8 Metal L:1.25/1.5 inc
1 x Servo MKS HV 777A+
1 x PBS TJ 40-G1 Turbine
1 x Xoar Electric Beechwood Prop 12x6
1 x PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Cable grommet Ø 6.4 mm (4 uds)
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x 80 mm rods set for direction control
1 x Allen wheel collar M4x6
1 x Canopy Latch
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Clip mini fixing for wing (2 pcs)
1 x 100 mm rods set for direction control
1 x Allen wheel collar M3x3
21,954.93EUR
Manufacturers
Manufacturer Info
Vasa model
Vasa model Homepage
Other products
Languages
Español English
Currencies