1 x | White smoke bombs AX-9 (10 pcs) |
1 x | Remote electric ignition system |
1 x | Yellow smoke canister 65 g |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Yellow smoke canister 100 g |
1 x | SE Ring 350 mm (2 pcs) |
1 x | Initior Transmitter FTX2 Wireless |
1 x | Spikes Band (5 m) |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Red smoke canister 100 g |
1 x | "S" set for planes |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | Parachutist |
1 x | Ventral support for AX-18/AX-60 |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Blue smoke canister 140 g |
1 x | SE Ring 450 mm (2 pcs) |
1 x | Parachute expulsion foam |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Blue smoke canister 100 g |
1 x | Smoke set "M" |
1 x | |
1 x | Red smoke canister 140 g |
1 x | Tape GFK 38 mm |
1 x | Smoke set "Glider" |
1 x | Yellow smoke canister 140 g |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | SE Ring 300 mm (2 pcs) |
2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | SE Ring 480 mm (2 pcs) |
1 x | Initior Receiver FRX2 Wireless |
1 x | Tape GFK 25 mm |
1 x | White smoke canister 100 g |
1 x | Electric rocket starters (6 pcs) |
1 x | SE Ring 360 mm (2 pcs) |
1 x | White smoke canister 65 g |
1 x | PCARD Wireless System |
1 x | 3l Smoke oil |
1 x | AX-60 starters (5 pcs) |
1 x | Green smoke canister 140 g |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Foil for sticking flaps and ailerons |
1 x | Cinta Goldfix 1m |
1 x | Red smoke canister 65 g |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
2 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Quicklock washer 2.5 mm (10 pcs) |
2 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Flat washer 3.2 mm (20 pcs) |
2 x | Lock washer 4.3 mm (20 pcs) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
2 x | M3 black washers (4 pcs) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
2 x | Lock washer 2.7 mm (20 pcs) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
2 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Round Rod 2,0x1000 mm |
1 x | Strip 2,5x1,25x330 mm |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | Round Rod 6,0x1000 mm |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Strip 2,0x2,0x330 mm |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Oratex White 2m |
1 x | Oracover Black 2 m |
1 x | Silent-blocks DLE 170M |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | SIMtransmitter 6 Mode 2 |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
1 x | Screw M2.5x5 (10 pcs) |
1 x | Screw M3x16 (10 pcs) |
1 x | Screw M3x20 (10 pcs) |
2 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | Servo M2x7/16 screw (4 pcs) |
2 x | Spring lock washer 2.6 mm (20 pcs) |
2 x | Servo M2x5/16 screw (4 pcs) |
1 x | HITEC Power Supply 30A. Max. 540w |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Screw M3x30 (10 pcs) |
2 x | Hexagonal Nut M2 (10 pcs) |
1 x | Nut for mounting M5 (4 pcs) |
2 x | Nut for mounting M3 (4 pcs) |
1 x | Blind nut M4 (4 pcs) |
1 x | Skies 2x 335 mm + 1x Esqui 250mm |
1 x | Flat washer 2.2 mm (20 pcs) |
2 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Nylon gear block Ø 5 mm (2 uds) |
1 x | Tail wheel for 8-12 kg models |
1 x | 1804 2400KV Brushless Motor Qav 250 mini |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | SU 29S 140 carbon landing gear |
1 x | ESC ALPHA 60A HV |
1 x | Combo 4 pcs AXI 2204 Multicopter |
1 x | Retract undercarriage for gliders up to 3,5 Kg |
1 x | Tailwheel for 20/60 size |
2 x | Nylon threaded block M6 (2 uds) |
1 x | Quicklock washer 3 mm (10 pcs) |
1 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | Quick hose connector 3-3 mm |
1 x | Air pressure gauge |
1 x | Legs + electric brakes for Viper Jet 90 |
1 x | Festo 6mm Tubing Holder (10 uds) |
1 x | Metal ring front FEMA |
1 x | Tail wheel for 5-8 kg models |
1 x | Landing gear clamp for Ø 3 mm (4 uds) |
1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
1 x | Dual Sequencer Gear and Canopy |
1 x | 160 mm carbon undercarriage (2pcs) |
2 x | Paramotor Trike XL |
1 x | Opto Gas Engine Kill Switch |
1 x | RCEXL Electronic ignition twin A-02 |
1 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
1 x | Selfstarr EME35 |
1 x | GLOW 2C + accesories |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Split pin 1x8 mm (10 uds) |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Pushrod octagone 4/3 |
1 x | Fully Threaded Steel Rod M3 |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Pushrod octagone 3/2 |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | Windsock Ozone L - 700 mm |
1 x | Parachute BACKUP X100 |
1 x | Wing OXY 5,0 m2 |
1 x | MAX pilot ARTF |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Sparkplug DLE CM6 |
1 x | DLE 30 complete electronic ignition |
1 x | Crystal TX 35.150 Ch 75 |
1 x | Servo M2x9/16 screw (4 pcs) |
1 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
1 x | Titanium M3x0,5x6 mm Flat Head screw (4 pcs) |
1 x | Tapping Screw M2.2x65 (10 pcs) |
2 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | Nylon Screw M6x40 |
1 x | Crystal RX 35.120 Ch 72 |
2 x | Crystal TX 35.010 Ch 61 |
1 x | Tray FUTABA T6K,T10J,T12K,T14SG,T16iZ,T18SZ,T18MZ,T32MZ |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | Lock nut aluminium M2 (4 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
1 x | Screws 2,2 x 6,5 mm (20 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
2 x | Lock nut M2 (10 pcs) |
1 x | Aluminium M2x12 mm screw (4 pcs) |
2 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
1 x | Pan Head Screw M2x8 PH countersunk head |
1 x | Pan Head Screw M2x6 PH |
2 x | Screw M2x8 (10 pcs) |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Tapping Screw M2.9x13 (10 pcs) |
2 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
1 x | Threaded insert M4 (4 pcs) |
1 x | Threaded insert M6 (10 pcs) |
2 x | Hexagonal Nut M2.5 (10 pcs) |
1 x | Blind nut M3 (4 pcs) |
1 x | Hexagonal Nut M3 (10 pcs) |
1 x | Threaded insert M5 (10 pcs) |
1 x | Hexagonal Nut M1,6 (10 pcs) |
1 x | Hexagonal Nut M1 (10 pcs) |
1 x | MZ-12, 6 Channel HoTT |
1 x | Transmitter GRAUPNER MZ-24 Pro |
1 x | MZ-18, 9 Channel HoTT |
1 x | Nylon threaded block M5 (2 uds) |
1 x | Y-Hose connector 4mm |
1 x | Aramid 50 daN 50 m |
1 x | Spinner propeller pleg. 42 mm / 6,0 mm |
1 x | Aluminum Fold Prop Spinner 40 mm / 5mm |
1 x | XPower H PROP HUB Ø6.0/42.5mm 0º |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/7º |
1 x | Spinner propeller pleg. 40 mm / 6,0 mm "Z" carbon |
1 x | White Fold Prop Spinner 38 mm / 5 mm shaft / 8 mm propellers |
1 x | Aluminium ignition bad (red) |
1 x | T-Hose connector 3-3-3 mm |
1 x | Body for landing gear Ø 4 mm |
1 x | Angled clevis with threaded rod M3 |
1 x | Y-Hose connector 6-6-6 mm |
1 x | Wheel cover holder Ø 3 mm (2 uds) |
1 x | Landing gear strap medium (4 uds) |
1 x | Set montaje amortiguador para modelos 8-16 Kg |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | T-Motor U7-V2.0 Kv420 |
1 x | Y-Hose connector 3-3-3 mm |
1 x | Tren de cola carbono 50-70cc |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Wheel cover holder Ø 6 mm (2 uds) |
1 x | OS 37 SZ-H, Connecting rod |
1 x | Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox) |
1 x | Spinner propeller pleg. 45 mm / 6,0 mm |
1 x | Spinner propeller pleg. 38 mm / 6,0 mm |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Spinner propeller pleg. 32 mm / 5,0 mm |
1 x | Aluminum Fold Prop Spinner 30 mm / 5.0 mm |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/0º |
1 x | Spinner propeller pleg. 38 mm / 5,0 mm |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Aluminum Fold Prop Spinner 38 mm / 5 mm |
1 x | Spinner propeller pleg. 36 mm / 6,0 mm |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/5º |
1 x | Spinner propeller pleg. 30 mm / 5,0 mm |
1 x | Spinner propeller pleg. 30 mm / 3,0 mm |
1 x | Spinner propeller pleg. 40 mm / 6,0 mm |
1 x | Spinner propeller pleg. 30 mm/5,0 mm/0º |
1 x | Spinner propeller pleg. 42 mm/6,0 mm/0º |
1 x | Aluminum Fold Prop Spinner 34 mm / 3 mm |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/5º |
1 x | Prop rubber XS set 4 pieces |
1 x | Spinner propeller pleg. 30 mm / 6,0 mm |
1 x | Spinner propeller pleg. 28 mm/5,0 mm |
1 x | Carbon plate 350x150x1.0 mm |
1 x | 30 mm Alu spinner 3 mm pleg. propeller |
1 x | Aluminum Fold Prop Spinner 30 mm / 3.17 mm |
1 x | Spinner propeller pleg. 30 mm/6,0 mm/0º |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | 34 mm Alu spinner 3.17 mm pleg. propeller |
1 x | Spinner propeller pleg. 32 mm / 6,0 mm |
1 x | Aluminum Fold Prop Spinner 50 mm / 6mm |
1 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | Aceite DELUXE turbine Jet Oil 1 litro |
1 x | Compact on-board starting system (9724) |
1 x | Compact on-board starting system (9713) |
1 x | Battery LiPo GENS 2200 mAh 2S 7.4v 60C (Gens Ace) |
1 x | Battery LiPo GENS 5000 mAh 4S 14.8v 45C (Gens Ace) |
1 x | Battery LiPo GENS 4800 mAh 5S 18.5V 18C (Gens Ace) |
1 x | Nylon Screw M4x20 |
1 x | Floating M4 washer pad (36 pcs) |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | Lipo GENS 200 mAh 1s 3.7 45C (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | Power supply NT 25 Amp. |
1 x | Crystal TX 35.180 Ch 78 |
1 x | Transmitter Stick Ends V3 Red - M3 (2 pcs) |
1 x | Socket Head Screw M2,5x12 |
1 x | Crystal Universal TX 35.140 Ch 74 |
1 x | Charger GensAce IMARS Dual Channel AC200W/DC300Wx2 |
1 x | Hexagonal Nut M4 (20 pcs) |
1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
1 x | Battery LiPo GENS 5500 mAh 5S 18.5v 25C (Gens Ace) |
1 x | Lock nut M5 (20 pcs) |
1 x | Battery LiPo GENS 4000 mAh 6S 22.2v 45C (Gens Ace) |
1 x | Battery LiPo GENS 3300 mAh 3S 11.1v 25C (Gens Ace) |
2 x | Lock nut M5 (10 pcs) |
1 x | Battery LiPo GENS 5300 mAh 4S 14.8V 30C (Gens Ace) |
1 x | Battery LiPo GENS 5300 mAh 2S 7.4V 30C (Gens Ace) |
|
12,138.00EUR |