Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Epoxy » Epoxy R-G » R1001101

29.50EUR

Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har
[R1001101]

Epoxy Resin L and Hardener L 40 min. (1 Kg) 715g Resina / 285g Hardener

The resin system Epoxy Resin L + Hardener L yields superior impregnating and wetting properties towards carbon, glass, aramid and natural fibres.

Low viscosity
Highly transparent
High degree of UV stability
Tack-free curing even of thin layers
Glass transition temperature (Tg) max. 76 °C (post-curing at 60 °C / 15 h)
High static and dynamic strength
Free of nonylphenol and DETA
Processing time: 40 minutes (100 g / 20 °C)
Mixing ratio:
100 : 40 parts by weight resin : hardener
100 : 45 parts by volume resin : hardener
It exhibits a very good price/performance ratio and is suitable for the following processing procedures:
Hand laminating
Vacuum moulding
Press moulding
Expertise for the resin system Epoxy Resin L + Hardener L: this system is not cytotoxic (cell damaging), important for applications in medical purposes.
Mechanical properties (Neat resin after curing)
Flexural test
Flexural strength (DIN EN ISO 178): 111 MPa
Flexural modulus (DIN EN ISO 178): 2.960 MPa
Tensile test
Tensile strength (DIN EN ISO 527): 69 MPa
Elongation at break: 4.7 %
Compression test
Compressive strength (DIN EN ISO 1426): 91 MPa
PoxySystems® is a registered trademark of R&G
General information about the system "Epoxy Resin L" with Hardeners S, L, CL, EPH 500, EPH 161, W 300, GL 1 and GL 2
* Low viscosity, free of solvents and fillers
* Fast impregnation of glass, aramid, carbon and natural fibres
* High static and dynamic strength (GL approval with the Hardeners GL 1 and GL 2 being present

Epoxy Resin L with the corresponding Hardeners S, L, CL, EPH 500, EPH 161, W 300, GL 1 and GL 2 is the most commonly used laminating and adhesive resin in R&G`s delivery programme.

In conjunction with the Hardeners S (15 minutes), L (40 minutes), CL (60 minutes), EPH 500 (60 minutes), EPH 161 (90 minutes), W 300 (300 minutes), GL 1 (30 minutes) and GL 2 (210 minutes), this epoxy resin exhibits similar mechanical properties to those of the laminating systems usual aerospace .Its heat deflection temperature reaches from 60 °C (S, L, EPH 500, W 300), to 80 °C (GL 1 and GL 2, after post-curing), to 95 °C (CL, after post-curing) and finally to 120 °C (EPH 161, after post-curing).

Its low surface tension, good adhesion, and minimal curing shrinkage makes the Epoxy Resin L ideal for bonding wood, metal, foamed polystyrene like Styropor® etc. It can be processed in all of the customary methods, e.g. hand lay-up, pressure and vacuum impregnation, press moulding and filament winding.

under request

Reviews

Customers who bought this product also purchased

Spinner 100 mm CFK under request	SPS 70V 140/280 A under request	MPS Gas-Cap-Powerswitch under request
Epoxy SLOW-CURE™ 30 min (130g) under request	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll under request	Servo HITEC HSB-9380TH under request

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Turbina XICOY X195 compact
2,959.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	AL Axle Shaft 4.0x16 mm (2 uds)
1 x	Landing gear axle Ø 4 mm (2 uds)
1 x	Landing gear axle Ø 6 mm (2 uds)
1 x	Landing gear axle 4x21 4 mm (2 uds)
1 x	Oracover ROYAL RED 2m
1 x	Oracover CHROME 2m
2 x	Oracover Brown 2 m
2 x	Papel japones 12 grs/m2 760x510 mm JAPICO
2 x	Ply-Span 450x600/13g White
1 x	Oracover Azul Cielo 2 m
1 x	Oratex Natural White 2m
1 x	Oracover Yellow CUB 10 m
1 x	Ply-Span 450x600/13g Blue
2 x	Ply-Span 450x600/13g Yellow
1 x	Oracover Yellow CADMIO 10 m
1 x	Oracover Azul 2 m
2 x	Ply-Span 450x600/13g Red
1 x	ORACOVER transparent Yellow (10 m)
2 x	Ply-Span 450x600/13g Orange
1 x	Oratex Natural White 20m
1 x	Oracover Black 2 m
1 x	Oratex Silver 2m
1 x	Oratex Red Fokker 10 m
1 x	Oracover Yellow CUB 2 m
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	ORACOVER Fluor red (2 m)
1 x	Oracover CARBON Metalic 1 m
1 x	MYLAR film A350 (1000x500 mm)
1 x	Oracover Orange 2 m
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
2 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Covered closure or fairings
2 x	SUS wire 3m (nylon coated)
2 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
2 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Steering arm 16 mm Ø 4 mm
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
2 x	Canopy Latch
1 x	Stainless steel cable Ø 0.5 mm (20 m)
2 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
2 x	Screw-lock connector M2 (2 uds)
2 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	White silicone 0,25 qmm wire (150 m)
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
2 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
2 x	100m servo "Premium" wire (white/red/blue)
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
2 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Silicone 0,35 qmm servos cable Futaba (5 m)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	Couple M4 for wire (10 pcs)
3 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Silicone 0,35 qmm servos wire Graupner(100 m)
2 x	5 line servos wire black (1 m)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Silicone 0,50 qmm servos wire Graupner(5 m)
1 x	Solvent Plasti Dip 1000 ml
2 x	Painting GHT Lexan Black 150 ml
1 x	1000 ml sealer (DOPE)
2 x	Universal Colour Paste white 50 g
1 x	Premium servo extension 50cm
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Shirt Hispano Aviación
1 x	Extension silicon 30 cm male (Graupner)
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
2 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Vest clothes Hispano Aviación
1 x	Futaba Female 40 cm extension
1 x	Extension silicon 30 cm male (Futaba)
3 x	Premium servo extension 75cm
2 x	Extension 30 cm (Futaba)
2 x	Premium servo extension 100cm
2 x	Circlick securite
1 x	Extension PVC 150 cm (Graupner)
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Extension silicon 100 cm (Futaba)
1 x	Futaba Female 40 cm extension
1 x	Tape GFK 50 mm
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Strip ABS 2.0x8.0x1000 mm
2 x	PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
1 x	PVC blue transparent battery termo-retract 68 mm (10 m)
2 x	6,4x1000 mm 2:1 black termoretract tube
2 x	PVC transparent battery termo-retract 195 mm (1 m)
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	PVC yellow transparent battery termo-retract 68 mm (1 m)
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Press fitting for 0,5 diam. steel cable (10 pcs)
1 x	Pushrod greyline 3/2 with coupler M2 L: 1000 mm
1 x	Triple rod con. 3mm Pushrod (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm
2 x	Snap long M2 (10 uds)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Fully Threaded Steel Rod M3
1 x	Snap for floding prop for 2 mm axi
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Pushrod octagone 4/3
2 x	Lead with adhesive (2 pcs)
1 x	Wheel collar 3 mm Ø (4 uds)
2 x	Steering arm 16 mm Ø 3 mm
2 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	38x4,5 mm wires output (2 pcs)
1 x	Spinner plastic black fixed propeller 30 mm
1 x	Extension silicon 30 cm female (Graupner)
1 x	Extension silicon 100 cm (Graupner)
2 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Split pin 1x8 mm (10 uds)
2 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Falcon Carbon Spinner 82mm for electric motor
2 x	Spinner Alumin. fixed propeller 45 mm / 3,2 mm
1 x	Silicone black 1,5 qmm wire ( 1 m)
2 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	Silicone red 6,0 qmm wire ( 1 m)
1 x	Spinner NUT M5
1 x	Spinner Alumin. fixed propeller 45 mm / 5,0 mm
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	F3A carbon 95 mm spinner
1 x	Silicone black 6,0 qmm wire ( 1 m)
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	Silicon red 1,0 qmm cable ( 25 m)
1 x
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Spinner NUT 1/4x28
1 x	Silicone red 4,0 qmm wire ( 1 m)
1 x	51 mm INO spinner (carbon imitation)
1 x	Spinner NUT M5
1 x	Silicone black 1,0 qmm wire ( 25 m)
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Spinner Alumin. fixed propeller 45 mm / 6,0 mm
1 x	Silicone red 1,0 qmm wire (100 m)
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	Spinner INO 63 mm Chrome (Imitacion metal)
1 x	Silicone black 0,75 qmm cable ( 1 m)
1 x	Hovercraft sailcloth
1 x	102 mm INO spinner (carbon imitation)
1 x	Spinner Alumin. fixed propeller 45 mm / 4,0 mm
1 x	F3A carbon 75 mm spinner for Hacker C-50
1 x	Carbon fiber rod 7.0 mmx1000 mm
2 x	Extension silicon 10 cm (Graupner)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Cabel "Y" 30 cm (graupner)
2 x	Extension lead 15 cm Multiplex
2 x	Extension 100 cm (Futaba)
2 x	Premium servo extension 25cm
2 x	USB Interface Adapter
2 x	PVC transparent battery termo-retract 85 mm (1 m)
1 x	2,4x1000 mm 2:1 black termoretract tube
2 x
1 x	Cable coupler M2 (10 uds)
1 x	Blade holder metal LAMA
1 x	Battery LiPo GRE18 600 mAh 7.4v
2 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	3,2x1000 mm 2:1 red termoretract tube
2 x	1,2x1000 mm 2:1 red termoretract tube
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	Ply-Span 450x600/13g Black
1 x	1,6x1000 mm 2:1 red termoretract tube
1 x	37 mm PVC transparent battery termo-retract (1 m)
1 x	1,6x1000 mm 2:1 black termoretract tube
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	2,4x1000 mm 2:1 red termoretract tube
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	PVC termo-retract battery 45 mm black transparent (1 m)
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	2,4x1000 mm 2:1 green termoretract tube
1 x	68 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	PVC transparent battery termo-retract 51 mm (1 m)
1 x	4,8x1000 mm 2:1 blue termoretract tube
2 x	Actuador lineal HLS12-100210-7.4v
1 x	Cabel charger transmitter GRAUPNER
1 x	50 mm aluminium spinner (Kavan)
1 x	Birch plywood plate 600x300x1.2 mm
1 x	Ciano KAVAN Thick 20g
1 x	60 mm aluminium spinner (Kavan)
1 x	Debonder CA 20g
1 x	Conector MR-60 (pareja)
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x	Adaptadores carga 6s JST-XH
1 x	150 mm inflatable superlight deluxe wheel (2 pcs)
1 x	Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x	Ball Bearing Oil 25 ml
1 x	Ciano KAVAN Super Thin 20g
1 x	Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x	BETA 1400 ARF Red
1 x	Tip wing protector 28x10x12 (2 pcs)
1 x	Landing gear frontal support 29x26x13,5
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Split M1,2x10 (10 pcs)
1 x	Wing bolts M3 Steel screw blue (2 pcs)
1 x	Wing bolts M3 Steel screw Red (2 pcs)
1 x	Cable grommet Ø 4 mm (4 uds)
1 x	Cockpit plastic closing
1 x	Tip wing protector 30x10 (2 pcs)
1 x	Allen wheel collar M3x3
1 x	Split pin 1.6x16 mm (10 uds)
1 x	28x5 mm wires output (2 pcs)
1 x	Allen wheel collar M4x6
1 x	Cable set PREMIUM, fuselage/wing
1 x	Spinner propeller pleg. 40 mm / 3,0 mm
1 x	Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm
2 x	6 mm Quick clamp_S (10 pcs)
1 x	Cabel "Y" 30 cm (Futaba)
1 x	20 g tin paste
1 x	Hobbylite Filler, Balsa colour
1 x	Spinner Alumin. fixed propeller 50 mm / 4,0 mm
1 x	4,8x1000 mm 2:1 black termoretract tube
1 x	Universal Colour Paste deep black 50 g
1 x	Spray EC Red 400ml
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x	Spinner INO 89 mm Chrome (Imitacion metal)
1 x	Spinner plastic white fixed propeller 51 mm
1 x	Spray adhesive AEROFIX 2
1 x	Silicone black 0,5 qmm wire ( 25 m)
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	Spinner propeller pleg. 40 mm / 3,2 mm
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Silicone 0,35 qmm servos wire Futaba (100 m)
1 x	Cable Cargador FUTABA
1 x	40 mm servo arm with bearing (2 pcs)
1 x	LightBox SR
1 x	TMM 2512-3S heli
1 x	Silicone black 0,75 qmm wire ( 25 m)
1 x	Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
1 x	Recess mount-rem. glow plug set
1 x	Program Card KAVAN ES
1 x	Servo GO-1013 MG 3.8kg
1 x	Servo GO-09 9g
1 x	SAVAGE Max Red 1080 mm
1 x	Servo GO-10S41MG 10.5 kg.cm 0.075s/60º
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Futaba male 40 cm extension
1 x	Extension silicon 35 cm male (Futaba)
1 x	Ciano KAVAN Medium 20g
1 x	Servo GO-1088MGW 74 kg.cm 0.125s/60º
1 x	Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x	Combustible Glow "KAVAN" air/heli 10% nitro
1 x	Pin hinge 34x16 mm (10 uds)
1 x	SIG Coverall 1.2x0.9 m
1 x	Smart Soldering Iron 110W/230V AC
1 x	Combo KAVAN C3536-1250 + KAVANA R50SB +
1 x	55 mm aluminium spinner (Kavan)

7,323.56EUR