1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x BLANIK 50 V2 Silver/Orange (SebArt)
1 x LIBELLE Standard 3.8m D-box H-201
1 x Jeemo Dolly
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Straightened threaded rod M2-1m
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x ABS tube 3.0x1.0x1000 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x ABS tube 18.0x16.0x1000 mm
1 x Receiver R6008HV-A comatible FUTABA
1 x DUPLEX 2.4EX MU 3 Sensor
1 x DUPLEX 2.4EX MFlow2 Gas 800
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x ABS tube 16.0x14.0x1000 mm
2 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Stickers-digit for marking
1 x DUPLEX 2.4 EX MBar
1 x ABS tube 9.0x7.0x1000 mm
1 x Sensor DUPLEX 2.4EX MUI 200
2 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x 
1 x Jeti Black cap
1 x DUPLEX 2.4EX MUI 75
1 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x Painting GHT Lexan Black 150 ml
1 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x DUPLEX 2.4EX MULi 6s M
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Universal Colour Paste deep black 250 g
1 x ABS tube 3.0x2.0x330 mm
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x DUPLEX 2.4EX Expander E4
1 x Nitroverdu 500 ml
1 x DUPLEX 2.4 EX MVario2
2 x Straightened rod Ø 0.5 mm x 1000 mm
1 x DUPLEX 2.4EX RC Power Switch 10
2 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Glases Nimbus "Black"
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x ABS tube 2.0x1.0x1000 mm
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x SUS wire 3m (nylon coated)
1 x Canopy Lock V1 M3 Blue (2 pcs)
2 x LO 100 Scale 1:2 - Modellbau Bruckmann
1 x Locking cable tie 4.6x203 (uds)
2 x Canopy Lock V1 M3 Red (2 pcs)
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x POWER PEAK D7 EQ-BID 12V/230V-Duo Charger
1 x Charger SKY RC e680
1 x SKY RC Temperature Sensor
2 x Landing gear axle Ø 5 mm (2 uds)
1 x Absorver mount set for 5-10 Kg models
1 x HITEC Power Supply 30A. Max. 540w
2 x Adaptadores carga 6s JST-XH
1 x 100 Newtons FEMA absorber
1 x 400 Newtons FEMA absorber
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled
1 x Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs)
1 x Pushrod greyline 3/2 with coupler M2
1 x Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x CF tube (L 1000 mm Ø030 mm, Ø26 mm)
1 x JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT
1 x Presto SF Light Filler styrene-free (420 g)
1 x Plasti Dip Liquid Tape 429 ml orange
1 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Paint gun for sprays
1 x Glases Ace
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Xoar Electric Beechwood Prop 21x10
1 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x Servo arm with 6 mm hole to FEMA 9800A
1 x Tap FESTO 6-6 mm
1 x T-Hose connector 6-6-6 mm
1 x Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs)
1 x Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm)
1 x Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs)
1 x Pushrod greyline 4/3 with coupler M3
1 x Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs)
1 x Pushrod octagone 4/3
1 x Pushrod octagone 3/2
1 x Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm)
1 x Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
1 x CNC FPV Display screen&Transmitter Holder Vertical
16,942.58EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies