Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Cianocrylate » Cyanocrylate R&G » R1501022

4.47EUR

CA Glue (medium) 20g
[R1501022]

CA Glue (medium) is a medium viscosity cyanoacrylate adhesive, suitable for bonding applications that require a larger gap fill.
Its medium cure speed and medium viscosity makes CA Glue (medium) suitable for a lot of industrial applications.
Single-component
Transparent
Solvent-free
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

temporarily out of stock

Reviews

Customers who bought this product also purchased

TYGON tubo 1 m Diam. 3.4 x 2.0 mm temporarily out of stock	Tygon tube 6.35 - 3.18 mm 1m temporarily out of stock	Propeller MENZ-S 23x8 temporarily out of stock
Sparkplug NGK CM6 temporarily out of stock	Conector BEC female (10 pcs) temporarily out of stock	XT-60 connector (female) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Electric Landing Gear ULTIMATUM 3.0 (Elektron Re
1,160.39EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Hovercraft sailcloth
1 x	Protective Cover for wires Ø 3 mm 1000 mm
1 x	Rubber profile 6-2 mm 2M
1 x	CM-3
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	37 mm PVC transparent battery termo-retract (1 m)
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Adapter lead MPX/EC3
1 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x	100m servo "Premium" wire (white/red/blue)
1 x	Glases Ace
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	1,6x1000 mm 2:1 black termoretract tube
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	XH male balance (2S) connector (2 pcs)
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Joint with bearing M3 22x5,5
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	2 mm female connector (2 pcs) with safety connector
1 x
1 x	Spray Graphit 33
1 x	Support Pitot JETI
1 x	M3 Maxi ball link (2 uds)
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Painting GHT Lexan Black 150 ml
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	RH long aluminium horn (2pcs)
1 x	Xplorer2 anemometro
1 x	Yellow smoke canister 65 g
1 x	Horn 6/20 with M3 Bearing
1 x	"S" set for planes
1 x	Pilot "Goose" (Slimline)
1 x	Yellow smoke canister 100 g
1 x	Small aluminium horn gold (2pcs)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	White smoke canister 65 g
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	White smoke bombs AX-60 (5 pcs)
1 x	Xplorer4 anemometro
1 x	1/12 Pilot "Tom"
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	La Capitania di Venetia accesories
1 x	6 mm Prop Adapter M8
1 x	2,3 mm Prop Adapter M6
1 x	3 mm Prop Adapter M6
1 x	Aero-Master Wings (Aero-naut)
1 x	Tirpiz Battleship 1:200
1 x	2.3 mm Adapter for 30 mm spinners
1 x	3.2 mm Prop Adapter M8
1 x	3,2 mm Prop Adapter M6
1 x	2,3 mm Prop Adapter M6
1 x	ZEUS F3A 2m
1 x	Fiberglass plate 350x150x2.5 mm
1 x	Foam plastic plates (310x210x8 mm)
1 x	Fiberglass plate 350x150x3.0 mm
1 x	Carbon plate 550x350x2.5 mm ECOTECH
1 x	DPS Switch JR/JR
1 x	5 mm Prop Adapter M8
1 x	6 mm Prop Adapter M8
1 x	4 mm Prop Adapter M8
1 x	5 mm Prop Adapter CN-Spinner
1 x	Prop Shaft Adapter 6 mm/M8 "long" 35 mm
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Long extra-strong control horn with bearing 2,8x34
1 x	Short extra-strong control horn with bearing 2,8x15
1 x	Horn F3A de Titanium 16 mm (2 units)
1 x	Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Rudder forward 90x28 "type Kato"
1 x	Long adjustable aluminium control horn with bearing 2,8x15
1 x	Adjustable brass horn threaded M3
1 x	5 mm M2 variable inclined horn
1 x	Medium extra-strong control horn with bearing 2,8x24
1 x	Axi for MVVS 3.5 Sport
1 x	Support XT60 conector (2 pcs)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Soporte filtro FESTO (4 pcs)
1 x	Support Filtro FESTO
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Support pumb/filter Xicoy X45
1 x	Support pump Xicoy X45

4,245.61EUR