1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Gorra Jeti Negra
1 x Banda lijado g. 180 "Carburo de Silicio" para BSL 220/E (5 pcs)
1 x Copiador 5 unidades de 20 cm
1 x Destornillador allen "Hex" Ø 2.0 molibdeno
2 x Conexión de vacío VA 1 (para manguera Ø 6 mm)
1 x Bascula precisión 0.1- 600 g
1 x Bascular < 40 Kg
1 x Banda lijado g. 120 para BSL 220/E (5 pcs)
2 x Banda lijado g. 180 para BSL 220/E (5 pcs)
2 x Bascula precision 0.1-2000 g
3 x Arrancador 12v (Max 90 and 15ccm)
1 x Crimpadora
2 x Alicate para hacer "Z"
4 x Bomba de vacio P1-N
2 x Arrancador EM Gear Power 250
1 x Alicate para "Ball-Link"
1 x Destornillador allen 1,5x50 mm molibdeno
1 x Copiador 2 unidades de 20 cm
1 x Destornillador allen 3,0x60 mm molibdeno
2 x Conector "T" 6-6-6 mm tubo bomba vacio
1 x Bomba de vacio 12 CFM completa
1 x Arrancador Sullivan-STAR 601
1 x Destornillador Torx® TX8
1 x Destornillador Torx® TX6
1 x Bolsas inyectoras desechables (30x16cm) 100 pcs
1 x Destornillador Allen 1.27 mm
1 x Destornillador allen 2,5x60 mm molibdeno
1 x Piloto Jet "Red" 1/6 Scale
1 x Piloto jet 130 mm
1 x Piloto 1/4 "Mike"
1 x Piloto JET 1:3,5
1 x Piloto 1/10 "Jack"
1 x Piloto 1/12 "Langley"
1 x Piloto 1/12 "Tom"
1 x Piloto 1/4 "Heidi"
1 x Piloto "Dick" Legends Series(Slimline)
1 x Piloto 1/7 "Japonés"
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x Piloto "Duke" Legends Series(Slimline)
1 x Piloto 1/6 "John"
1 x Piloto militar "Fly Boy" tamaño 9cm (Slimline)
1 x Piloto civil "Pamela" tamaño 9cm (Slimline)
1 x Piloto 1/6 "Buddy"
1 x Perfil Acero Inox. 14.5x9.6x1000 mm
1 x Listón de HAYA redondo 2,0 x 1000 mm
1 x Conector ABS "CRUZ" 4.0 mm x 1000 mm
1 x Varilla acero Ø 4,0 mm x 1000 mm
1 x Conector banana oro 6,0 mm Ultralight (pareja)
1 x Tubo ABS 18,0x16,0x1000 mm
1 x Circlick para eje 2.3 mm (10 pcs)
1 x Acople ALU M3 Ø 4 (2 uds)
1 x Brazo servo doble aluminio V3-Hitec 3-3,5" azul
1 x Barra pegamento caliente Verde
1 x Brazo servo 52 mm Hitec
1 x Soporte tubo Ø 6mm (10 pcs)
1 x Alicate para "Ball-Link"
2 x Barra pegamento caliente Negro
1 x Soporte montaje servos Std. apaisado
1 x Brazo servo doble pull-pull 14/20 mm Futaba con rótulas
1 x Destornillador Allen 1.5 mm
1 x Brazo servo 20 mm Hitec
1 x Brazo servo 38 mm Hitec con rótula
1 x Brazo servo 20 mm Futaba
1 x Banda lijado g. 80 para BSL 220/E (5 pcs)
1 x Brazo de servo 50 mm con rodamiento (2 pcs)
1 x SERVO DES 568 MG
1 x Guantes M vynyl IDEAL Light (100 pcs)
1 x Servo TONEGAWA PS-050
1 x Plancha para entelar mini
1 x Servo Dymond D 37 Eco
4 x X-RAY Micro QR (Tubo de cola)
2 x Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x Espatulas madera (150x18x1.5mm) 100 pcs
1 x Plancha entelar Std
1 x Fox 4000 mm (Airwold)
3 x X-RAY Micro QR (Dirección)
1 x Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x LO 100 ARC 3.3m
2 x Planeador IKARUS
2 x Velero Mü13e (Bergfalke)
1 x Planeador LS-8 GFK 6m
1 x Surprise XII Timón de Dirección (Freudenthaler)
1 x Rueda de acero Proxxon/Dremmel 2,35 mm
2 x Funda plancha entelar STD
1 x BLANIK 50 V2 Silver/Orange (SebArt)
1 x DINO Glider ARC
1 x Piloto 1/6 "Tony"
1 x Arrancador 12v (Max 180 and 30ccm)
2 x Barra pegamento caliente Rojo
1 x Destornillador allen 2,0x50 mm molibdeno
1 x Acumulador polvo para limpieza moldes
1 x Conector alas/fuselaje para 12 pines AWG 20-22
1 x DPS Interruptor JR/JR
2 x Conector AWG Macho 6 pines
1 x Interrruptor de encendido SPARK Switch 5.9v
1 x Hélice POWER-PROP 7x7
1 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x Conexion PREMIUM fuselaje/alas para 3 servos SUB-D 160 cm
1 x Conector AWG Hembra 16 pines
1 x SERVO DES 588 BB MG
2 x X-RAY Micro QR (Profundidad)
1 x Tacometro Hyperion Multi-pala
2 x Servo BLS-M55B 61.2kg
1 x Brazo servo FUTABA long (8 pcs) DUBRO
1 x Sensor RPM Optico para Dinamometro
1 x Servo RHINO pro SHV digi 4
1 x Brazo servo doble alu. RHINO
1 x SERVO DES 806 Piñones
1 x Soporte lija 25 mm
1 x Pincel Gr.5
1 x Perforador hélices para EME35 y DLE35
1 x Perforador hélices para DA50, DLE55 rojo
1 x Tacometro HANGAR 9 digital
1 x Lijadora triangular OZI/E
1 x Perforador hélices DLE170
1 x DG-303 ACRO 3750 mm, cabina
1 x DELPHIN Race 3.6m c64
1 x Swift S1 De-luxe ARF 3.730 mm (TopModel)
1 x ASPIRE Red ARF 2.000 mm, Parte Frontal Fuselaje
1 x Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x Hoja sierra PROXXON (50mm-20T) para KS-230
1 x Roller cutter 28 mm
1 x Llaves mini mordaza/bloqueo (2 uds)
1 x Llave inglesa de precisión L100 mm
1 x Molde conector XT-30
1 x Hoja sierra 8 mm OZI220E
1 x Tubo bomba vacio 8/6 mm transp. (25 m)
1 x Perforador hélices DA-85/100/120/150/200 y VM 60-210
1 x Set brocas PROXXON 0.5-3.2mm (10 pcs)
1 x Plancha entelar Profi LCD
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Tren electrico retractil FELIX SportJet 2.200
1 x Soldador 100W/200V
1 x Planeador STROLCH
1 x SCHOCKJET ARF 2.050 mm
1 x PC-21 2880 mm Electric Landing Gear
1 x Soldador pequeño 100 w/230 v
1 x PC-21 2.880 mm (w/o oracover)
1 x Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x Planeador PIROL
1 x Roller cutter 28 mm, cuchilla recambio (2 pcs)
1 x Doblador de tubos
1 x Fundas de Luxe completas ASPIRE
1 x ASPIRE Red ARF 2.000 mm, Fuselaje
1 x Fournier RF-4D
1 x Ventus 2cx 4,5 m, Cabling Wings
1 x ASPIRE Red ARF 2.000 mm, Set Elevadores
1 x FOX MDM-1 3.500 mm ARF White
1 x Tren aterrizaje Electrico ASPIRE
1 x SAGITA Alsema 3,0 m
1 x TAKEO 3.6m electric
1 x Tren aterrizaje Electrico GALEB G4
1 x BLANIK 50 V2 Silver/Blue (SebArt)
1 x Hélice Electric Carbon 8.5x5
1 x Helice PT 22x10 EL
1 x Helice PT 20x13 EL Tripala
1 x Conector AWG Macho 20 pines
1 x Prolongador 6 lipos conector XH > EH
1 x Servo AN-20 MGBBA
1 x Brazo servo Alu 90º eje 3 mm
1 x Hélice POWER-PROP 11x8
1 x Hélice POWER-PROP 14x9 Izda
1 x Helice carbono 9x4.7 * 22x12
1 x Helice MEJZLIK 9,5x3 SF Carbón Indoor
1 x Hélice MEJZLIK 20x13 Electric light (41 g)
1 x Interruptor Magnetico MULTIPLEX
1 x Condensador 1640 Addcap
1 x Prolongador 5 lipos conector JST/C
1 x Conector AWG Hembra 12 pines
1 x Conector JST SH 1,0mm macho con cable de 10 cm
1 x Interruptor RX/Batería
1 x Adaptador USB para elementos Jeti DUPLEX
1 x PC-21 2880 mm Tren aterrizaje electrico(Electron Retracts
1 x Conector AWG Hembra 20 pines
1 x Hacker X-Pro USB interface V2
1 x Conector AWG Hembra 6 pines
1 x Interruptor electronico JETI SP6 0-15v/6A
1 x Tren aterrizaje Electrico F9F COUGAR
1 x JetiBOX
1 x Piloto civil "Gramps" tamaño 9cm (Slimline)
1 x Tarjeta Programadora Jeti Advance Plus
1 x Tarjeta programadora RAY G2
1 x BEC Mini JETI
1 x Conector AWG Macho 12 pines
1 x Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
30,999.52EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas