1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Kit hydraulic brake
1 x Pilot "Goose" (Slimline)
1 x "M" set
1 x 1/6 Pilot "John"
1 x Initior Transmitter FTX2 Wireless
1 x Red smoke canister 65 g
2 x Remote electric ignition system
1 x Piloto jet 130 mm
1 x Mixers smoke bombs AX-60 (5 pcs)
2 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x 1/10 Pilot "Jimmy"
1 x Pilot "Anthony" (Slimline)
1 x Blue smoke canister 140 g
1 x 1/6 Pilot "Garry"
2 x 1/6 Pilot "Tony"
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x 1/4 Pilot "Heidi"
1 x White smoke bombs AX-18 (5 pcs)
2 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x AX-60 starters (5 pcs)
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x White smoke canister 65 g
1 x Red smoke canister 140 g
1 x B4-0 rocket charges (6 pcs)
1 x Piloto Jet "Red" 1/6 Scale
1 x AX-60 starters (5 pcs)
1 x Wing tips support for AX-18/AX-60 (2 pcs)
2 x Initior Receiver FRX2 Wireless
1 x Pilot "Adolf" Legends Series (Slimline)
1 x Yellow smoke bombs AX-60 (5 pcs)
1 x Plastic caps for AIR BURTS (30 pcs)
2 x Green smoke canister 140 g
2 x White smoke bombs AX-9 (10 pcs)
1 x ABS tube 14.0x10.0x1000 mm
1 x Strip 1,5x1,5x330 mm
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x 2,0x50 mm allen screwdriver
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Suncover 100cc Red
2 x White smoke canister 140 g
1 x 1/12 Pilot "Cougar"
1 x Electric rocket starters (6 pcs)
1 x 1/6 Pilot "Buddy"
1 x 1/7 Pilot "Japanese"
1 x Pilot "Duke" Legends Series (Slimline)
1 x Piloto JET 1:3,5
1 x Yellow smoke canister 140 g
1 x Parachutist
1 x Baseplate servo
1 x RX cabel
1 x RX external cable for estandar receivers
1 x Yellow smoke canister 65 g
1 x White smoke bombs AX-60 (5 pcs)
2 x Selfstarr EME35
1 x Extractor piñones 2.3/3.2 mm
1 x Compact on-board starting system (9715)
1 x Black smoke bombs AX-60 (5 pcs)
1 x RCEXL Electronic ignition twin CM-6
1 x Brake for 140 mm wheels
1 x GLOW 5C + accesories
1 x Aluminium ignition bad (blue)
1 x Motor NGH GT-17
1 x Suction funnel for carburetor 90D-M (red)
1 x Motor EME 35 cc with electric starter
1 x Piston ring EME 35cc
1 x Stainless steel flange for VM 60/70/120/140
1 x Polyurethan FESTO hose 3x0,5 mm, transparent
1 x Piston ring for motor 58/116 cc
1 x ZG231cc SHL
1 x VALACH Motors VM 70 S1-4T
2 x ZENOAH G270RC
2 x ZENOAH ZG 26SLH Helicopter Engine
2 x Motor EME 60 cc
1 x Pitts Mufflers EME 70 cc (2 pcs)
1 x RM-85FSI 4-stroke inline gasoline engine
1 x Motor ROTO-85 FS NG 4T 2 cylinder Boxer
2 x EME 55 cc carburetor WALBRO
2 x Piñon motor autostarter 35cc
2 x One Way bearing for EME35 starkit with key
1 x CILINDER FOR DLE55, DLE111, DLE222
1 x 30 mm gas motor standoff
1 x COMFORT MOUNT ø 55 mm
1 x 300 Newtons FEMA absorber
1 x 2 mm Prop Adapter M6
1 x 2.3 mm Adapter for 30 mm spinners
1 x 12 mm portholes (10 pcs)
1 x 3,2 mm Prop Adapter M6
1 x 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x Wheel FEMA 152 mm / 8 mm
1 x Servo holder for retract
1 x Landing gear axle Ø 8 mm (2 uds)
1 x 14 mm Portholes for screws (10 pcs)
1 x 15x7 tree blades propeller
1 x 15x7 tree blades propeller LEFT
1 x 29,0 mm propeller (left propeller)
1 x 290 mm 8x4 M4 shaft ship
1 x 3,2 mm Prop Adapter M8
1 x 3 mm Leader (L 100 mm)
1 x 25 mm fenders (10 pcs)
1 x 3.2 mm Prop Adapter M6
1 x 12 mm mast holder
1 x 11x7 tree blades propeller
1 x 10 mm portholes (10 pcs)
1 x 300x4 mm M4 shaft ship
1 x 3.17 mm Prop Adapter CN-Spinner
1 x 10 mm Prop Adapter M12
1 x 250 mm / 16 mm Airbrakes
1 x 2,3 mm Prop Adapter M6
1 x 16x10 tree blades propeller Master Airscrew
1 x 2,3 mm Prop Adapter M6
1 x 28 mm turnbuckle
1 x 29,0 mm propeller (rigth propeller)
1 x VITAPROP CARBON FOLDING PROP 15x9.5"
1 x 290 mm M4/4 mm Prop shaft
1 x 14 mm portholes (10 pcs)
1 x 12x8 tree blades propeller
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Burner Plug K30/ K45
1 x Bomba KP500V Kingtech
1 x ODYSSEY ARF 2190 mm + Electric Landig Gear,COMBO
1 x F4U CORSAIR 2360 mm
1 x ASPIRE Red ARF 2.000 mm, Set Elevators
1 x F-16 Scale 1:6 Camuflaje Grey (1.630mm)
1 x ASPIRE Red ARF 2.000 mm, Front Fuselage
1 x F9F COUGAR Red ARF 1.562 mm
1 x Focke Wulf FW-190A-8 93", Spinner 3Blade Scale
1 x ASPIRE Navy ARF 2.000 mm
1 x ASPIRE Blue ARF 2.000 mm
1 x Green smoke canister 65 g
1 x Charger SKY RC D200 neo
1 x White smoke canister 100 g
1 x Turbina KINGTECH K142 G4M
1 x Exhaust K45TP
1 x Battery LiFe -1450/25C-3S 9.9V
1 x KingTech K45TP G4 Turboprop
1 x Turbine KingTech K30G Restart
1 x Filter KingTech
1 x Turbina KINGTECH K320 G5
1 x Kerostarter K30G
1 x FOD Screen K140G/K180G/K210G
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Carburetor menbrane for ZG 45SL/ ZG62/S/SL motor
1 x 45 mm gas motor standoff
1 x 90° TUBE-ANGLE Ø 25 mm
1 x Dia. 20x10 mm teflon tube for escape
1 x 10cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x Canister combo DLE 120 cc
1 x Battery LiFe -2100/25C-3S 9.9V
1 x Tire ODYSSEY Ø 89mm
1 x HAWKER HUNTER 1:5,8 (1.770mm)
1 x Focke Wulf FW-190A-8 93" (2362 mm)
1 x F-4 Phantom Scale 1:7, Electric retract landing gear
1 x ASPIRE Red ARF 2.000 mm, Fuselage
1 x ODYSSEY Horns Set GFK
1 x HAWKER HUNTER 1:5,8 Desert (1.770mm)
1 x Focke Wulf FW-190A-8 93", Electric retract Landing gear
1 x F-16 Scale 1:6, Electric retract landing gear
1 x L-39 Albatros 1:4.75, Electric retract landing gear
1 x F4U CORSAIR MARINES 2360 mm
1 x ASPIRE Red ARF 2.000 mm, Canopy
1 x F4E Phantom Scale 1:7
1 x L-39 Albatros Scale 1:4.75 1991 mm
1 x F-16 Falcon Black Knights 1:6 (1630 mm)
1 x Support conector MPX (6 pcs)
1 x Support Flush MPX Conector (6 pcs)
1 x Ignition RM-25V
1 x Walbro carburetor for MVVS 26/30/35/40 cc
1 x Suction funnel for carburetor WALBRO 20-80cc (red)
1 x ZENOAH ZG 62 SL
1 x Reduction gear 2.8:1 for ZG 38 inline version
1 x CDI EME 55/60 cc
1 x Motor EME 70 cc
1 x Pitts Mufflers EME 55/60 cc
1 x Motor OS FS 75 AX
1 x Motor OS 37 SZ-H
1 x Pick up EME 55/60 cc
1 x 90° TUBE-ANGLE Ø 28 mm
1 x COMFORT MOUNT ø 25 mm
2 x Spinner propeller pleg. 38 mm / 5,0 mm
2 x Spinner propeller pleg. 40 mm / 6,0 mm
1 x OS 37 SZ-H, Bulon piston
55,876.23EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies