419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]


Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x DA-50 Carburator
1 x 60 mm long Prop hub for ZG45SL, ZG62/S/SL and ZG80B
1 x Crankcase Gasket set for ZG 74 / ZG 80
1 x 15 cm PTFE-tubing for 25 mm tubes
2 x Insulator ZG 20
2 x Fixing Ring with Base 60 mm
1 x Motor Mount for TITAN ZG45 and ZG62, length 36 mm
1 x Cilinder joint for G230RC/G260RC
1 x Flat version carb bend for the ZG 62
1 x Header ZG 45/62, "wide"
1 x Cylinder ZG 26SC/SLH
1 x Gasket carburettor/insulator for ZG 38/S/SC
1 x Ignition for ZG motors
1 x Cylinder gasket ZG22 / ZG23 / G2D70 / G2D96-D
1 x Gasket, insulator ZG 20
1 x Header ZG 45/62, "normal"
1 x Gasket, cylinder ZG 20
2 x Gearwheel 9724/09 for ZG 45
1 x Aluminium Motor Mount ZG23SL/H/M and ZG26SC/SCM, ZG231SLH
1 x Motor Mount for TITAN ZG45 and ZG62, length 72 mm
1 x Cylinder for ZG20
1 x Carburettor and crankcase nipple for ZG45SL, ZG62/S/SL and ZG74B
1 x Carburetor for ZG45SL and ZG62/S/SL
1 x Insulator block ZG 38/S/SC
1 x Ignition module ZG 38/S/SC
1 x Gasket carb - intake manifold for ZG 74B/ZG 80G
1 x Gasket cylinder / insulator for ZG 38/S/SC
2 x Intake tube ZG 74/80, DA85, VM 170-420 with special screws
1 x ZENOAH ZG26 SCM Marine Engine
2 x ZENOAH ZG 26SC with magneto ignition
2 x ZENOAH/ZG 20cc
4 x ZENOAH ZG 26SLH Helicopter Engine
2 x Reduction gear 2.8:1 for ZG 38 inline version
3 x Pitts Muffler kit for CAP 21
1 x Canister combo DLE 111 cc
1 x 90° TUBE-ANGLE Ø 28 mm
1 x KS86 V muffler up to 65cc
2 x Captador RCEXL para DA
1 x Giant Scale Muffler SLIMLINE D.A. 100 (2pcs)
1 x 90° TUBE-ANGLE Ø 25 mm
1 x Stainless Steel Muffler D.A. 50/100/120
1 x Air Intake manifold 90° - Large
1 x Stainless Steel Bend D 28x0,6mm
1 x Stainless Steel Bend D 15x0,4mm
1 x Stainless Steel Bend D 22x0,5mm
2 x Stainless Steel Bend D 20x0,6mm
1 x Stainess steel exhaust flange for ZG20 / ZG22 / ZG23/ ZG26 / G23
1 x Exhaust gasket for ZG20/ZG22/ZG23/ZG231 ZG26/G2D96-D/G230RC/G260
1 x Exhaust gasket Valach 85
1 x Motor MOKI S 250 cc 7-cylindrer
1 x Motor DA 50-R
1 x ZENOAH ZG 62 SL
1 x Canister combo DLE 55 cc
1 x TUNED PIPE for motors up to 40-60 & 70-85 cc
1 x Pitts Muffler for D.A. 120
1 x Silencer with rear exhaust DA-120
1 x Stainless Steel Muffler D.A. 35-70
2 x Propeller diller for DLE111 and DA85-150
2 x Tufnol Choke Lever Arm d=4,7mm
1 x COMFORT MOUNT ø 25 mm
2 x Filetro gasoline filter Tillotson OW497
1 x Opto Gas Engine Kill Switch
1 x Spring Clip 25 mm teflon tube
1 x DA-50R motor alumine support
1 x 40 mm gas motor standoff
1 x Saito FG-36 motor support
1 x Spring Clip 16 mm teflon tube
1 x Gasket for motor DA 50
1 x Selfstart electronic switch
1 x 50 mm gas motor standoff
1 x Extension Ø25mm x L: 60 mm
1 x Propeller diller for DA50, DLE55 red
1 x Tufnol flange carburator
1 x Tacometer mini ignition RCEXL
1 x Gasket for motor DA 50
1 x Metalic joint for DA-50R/DA100 cilinder/elbow
2 x Gasket for motor DA 50-R
1 x 152x46 Ø6.0 mm aluminium core wheel
1 x Spikes Band (5 m)
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x 120x60 mm C SLH KOVO wheel
1 x 1,2x1000 mm 2:1 red termoretract tube
1 x 20x200 mm battery rings
2 x 1/6 Pilot "Garry"
1 x Connectors banna oro 3,5 mm (M/F)
1 x MPX Sub-D Adaptor
1 x Conector BEC male (10 pcs)
1 x XH female balance (2S) connector (2 pcs)
1 x Strip 3,5x1,75x330 mm
1 x 68 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x Glases Ace
1 x Oracover CHROME 2m
1 x Threaded coupler M3 (10 uds)
1 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x 127x43 Ø6.0 mm aluminium core wheel
1 x 1/6 Pilot "Tony"
2 x Glases Stratus
1 x Connector CAN 15
3 x 1/12 Pilot "Tom"
1 x 1/6 Pilot "Cindy"
2 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Connectors banna oro 8,0 mm (M/F)
1 x Oracover Black 2 m
1 x Motor DA 100L
1 x Motor DA 120
1 x Monokote BLANCO jet (1.8x0.65m)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x 10 mm gas motor standoff
1 x 1/10 Pilot "Jack"
1 x SE Ring 200 mm (2 pcs)
1 x XH female balance (5S) connector (2 pcs)
1 x Glases Nimbus "Black"
2 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Pilot "Duke" Legends Series (Slimline)
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Glases Flitemaster
1 x 165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x 2,4x1000 mm 2:1 green termoretract tube
1 x Aluminium red ball links M3 V1 (10 pcs)
2 x 1/7 Pilot "Japanese"
1 x 
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Piloto Jet "Red" 1/6 Scale
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Round Rod 1,25x1000 mm
1 x Connectors DEANS (T)
1 x 160 mm carbon undercarriage (2pcs)
1 x SE Ring 480 mm (2 pcs)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Foil for sticking flaps and ailerons
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Round Rod 1,5x1000 mm
1 x 1/4 Pilot "Heidi"
2 x Oracover Brown 2 m
2 x BETA 1400 ARF Red
1 x Pin hinge 26x11 mm (10 uds)
1 x KAVAN Hand crank fuel pump
1 x Ciano KAVAN Thick 20g
1 x Ciano KAVAN Medium 20g
1 x Glow starter with charger 230v
2 x Ciano KAVAN Super Thin 20g
1 x Electric Fuel Pump 12v
1 x Ball Bearing Oil 25 ml
1 x ZG231cc SHL
3 x ZENOAH ZG 38 SC with Choke Carburettor
1 x Combustible Glow "KAVAN" air/heli 5% nitro
1 x Pin hinge 39x20 mm (10 uds)
1 x Glow Plug Clip 1.3 Ah
1 x Spinner 40 mm Black (Kavan)
1 x Ciano KAVAN Thin 20g
1 x Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
2 x Conector MT-60 (pair)
1 x SKY RC T400Q Charger 4x100w
1 x OS GT15 W/E-4040 for airplane
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Adaptadores carga 6s JST-XH
2 x Combustible Glow "KAVAN" air/heli 15% nitro
2 x Charger SKY RC e680
1 x Pin hinge 34x16 mm (10 uds)
1 x ZENOAH ZG 80B
1 x Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter
1 x PCI-HV ignition conversion set with Zenoah rubber plug cap for Z
2 x Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x Conector MR-60 (pareja)
1 x Sensor Ignition RCEXL Universal
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x 58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x Oracover Black 10 m
1 x 4,8x1000 mm 2:1 blue termoretract tube
1 x 12.7 mm 2:1 black termoretract tube
1 x ABS Strip 1.0x3.0x1000 mm
1 x Spinner plastic white fixed propeller 51 mm
1 x Starter 12v (Max 90 and 15ccm)
1 x Cockpit aluminium closing 4.7g
1 x Radial heatsink for MPJ AC25/35-xx motor
2 x 1/10 Pilot "Jimmy"
1 x Solid Headers for Single Cylinder DA-60 Solid 50mm drop
1 x Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x ALU servo arm 90º 3 mm shaft
1 x ALU double servo arm 3 mm shaft
1 x Gear for D 200 BX
1 x Menbrane joint for DA 50-R
1 x Stainless Steel Bend D 25x0,5mm
1 x Servo BMS-4112
1 x Aluminium wide washer M3 red (4 pcs)
1 x 20 mm gas motor standoff
1 x 6,4x1000 mm 2:1 red termoretract tube
1 x Monokote ROJO misil (1.8x0.65m)
1 x 4,8x1000 mm 2:1 black termoretract tube
1 x 2,4x1000 mm 2:1 black termoretract tube
1 x 6,4x1000 mm 2:1 green termoretract tube
1 x 6,4x1000 mm 2:1 black termoretract tube
1 x Crystal Universal RX 35.040 Ch 64
1 x 550 cc gasoline fuel tank complet
1 x Hot Glue Stick GREEN
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x 
1 x 3D Spinner for DLE 30
1 x Spinner 159x200 mm GFK
1 x Spinner 90 mm CFK
1 x Round Rod 2,5x1000 mm
1 x Partall paste 650 g
1 x Fuel tank 500ml (17oz)
1 x O-Ring SAITO FG-60 R3
1 x Round Rod 6,0x1000 mm
1 x Baseplate servo
1 x Fod Guard 94x32 mm
1 x Round Rod 4,0x1000 mm
1 x 12 mm floating pad (49 pcs)
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x Connectors MPX male (PIN double)
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x Magnetic Connect locking system
1 x 1/4 Pilot "Mike"
1 x Connectors MPX female (PIN double)
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x Hot Glue Stick BLACK
1 x 45 mm aluminium spinner (Kavan)
1 x Debonder CA 20g
1 x Blade holder metal LAMA
1 x Birch plywood plate 600x300x1.2 mm
1 x M3 Maxi ball link (2 uds)
1 x Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
1 x Servo GO-1280 MG 40 kg.cm 0.085s/60º
1 x SAVAGE Max Red 1080 mm
1 x 50 mm aluminium spinner (Kavan)
1 x BETA 1400 RTF Red
1 x Motor UMS Radial-7-35cc glow
1 x Birch plywood plate 600x300x1.5 mm
1 x Round Rod 1.0x3.5 cm
1 x 
1 x 25 mm Sandpaper file
1 x Battery LiPo GRE18 600 mAh 7.4v
1 x UMS radial-engine, 7 cylinder 90ccm, gas
1 x Motor UMS Radial-5-150cc gas
1 x Motor UMS Radial-5-125cc gas
31,345.54EUR
Manufacturers
Manufacturer Info
O.S.
O.S. Homepage
Other products
Languages
Español English
Currencies