1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Cap Hispano Aviación
1 x Parachute XTRALITE S
1 x Aluminium wide washer M3 blue (4 pcs)
1 x 10 mm floating pad (72 pcs)
1 x Carbon fiber rod 16 mm x 1000 mm
1 x 45 mm rods set for direction control
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x 38x4,5 mm wires output (2 pcs)
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x 
1 x Cap closure 33/23.5mm (2 uds)
1 x 22 mm Cut Disc Proxxon/Dremmel
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x 140 mm rods + T patellas set for direction control
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Blind nut M6 (4 pcs)
1 x Fresa corte diamante Ø 2.3mm (bola)
1 x 140 mm rods set for direction control
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Ball Link Plier
1 x 12 mm floating pad (49 pcs)
1 x Aluminium cap bolt washer M4 green (8 pcs)
2 x Cable grommet Ø 6.4 mm (4 uds)
1 x Fabric scissors curved Premium, 16 cm / 6" length
1 x Dremel PERMAGRIT thin lime
1 x Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x 15 mm floating pad (30 pcs)
1 x Allen wheel collar M4x6
1 x Bungee HLG Premium
1 x Cable grommet Ø 4 mm (4 uds)
2 x 28x5 mm wires output (2 pcs)
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x Squared carbon wing joinner 5x5x220 mm
1 x Fresa corte diamante Ø 1.0mm (bola)
1 x Fresa corte diamante Ø 2.35mm (lentil)
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x 11 mm Rubber pads (14 pcs)
1 x Blind nut M3 (4 pcs)
1 x Blind nut M5 (4 pcs)
1 x 6 mm aluminium horn with patella
1 x Extractor piñones 2.3/3.2 mm
1 x Glases Stratus
1 x Plasti Dip Liquid Tape 429 ml orange
1 x Horn 5/20 with M2 Bearing
2 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Glases Nimbus
1 x Xplorer3 anemometro
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Spannlack 1000 ml
2 x 1/12 Pilot "Cougar"
1 x Horn 13,5x16 mm (2 pcs)
1 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x ABS 500 x 400 x 1,5 mm (white)
2 x Gates hinge 30x16 mm (2 pcs)
2 x Flap hinge 33x9 mm (6 pcs)
1 x 1/12 Pilot "Langley"
1 x Glases Nimbus "Black"
1 x Dean "T" - Futaba Adapter
1 x 2 LiPo XH>EH adapter
1 x CC 02
1 x TMM 2512-3S heli
1 x Propeller POWER-PROP 7x7
1 x silverlot 45% - 1,50x500 mm solder rods (2 pcs)
1 x Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
1 x Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x Tachometer Hyperion Multi-pala
1 x Sub-D Plug Mold
1 x Starter 12v (Max 90 and 15ccm)
1 x Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs
1 x Spinner 42 mm EXTRA 330SC
2 x Tube bender
2 x Welder 100W/200V
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x FUTABA 20 mm servo arm with ball link
1 x Mould Resin P 10 kg
1 x Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
1 x Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x Servo SAVOX SV-1254 MG HiVolt Low Profile
1 x Tester LiPo/LiIon/LiMn/LiFe
1 x Soldering tip for KAVAN soldering iron KAV66.8338
1 x Sanyo TX Battery Eneloop 7,2 V MPX
1 x Tip wing protector 28x10x12 (2 pcs)
1 x Hot Glue Stick BLACK
1 x Steering arm 12 mm Ø 4 mm
1 x Servo arms set HS-65HB/MG/5065MG
1 x Heli digital angle measurer
1 x MPX 8 pins plug mold
1 x Snap for floding prop for 2 mm axi
1 x 1/10 Pilot "Jimmy"
1 x Piloto Jet "Red" 1/6 Scale
1 x Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x 
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Propeller 9x4,7 SlowFlyer
1 x 1/12 Pilot "Fighter"
1 x Combustible Glow "KAVAN" air/heli 5% nitro
1 x 10-15mm Servo Arm HITEC
1 x Epoxy Resin L (2.5 Kg)
1 x resin-hardener L-385 H-385 (625 g)
1 x HITEC 20 mm servo arm with ball link
1 x Piñones SAVOX SH-0350
1 x 20-25mm Servo Arm
1 x Futaba 52 mm servo arm
1 x Servo SAVOX SV-1261 MG
1 x Hardener Aero EPH 161 (500 g)
1 x Hitec 52 mm servo arm
1 x Servoarm Aluminium SH-82
1 x Vertical mounting servo holder
1 x resin-hardener package L-385 with hardener H-385 (3.5 Kg)
1 x Futaba 17 mm servo arm with ball link HITEC
1 x Hitec 38 mm servo arm
1 x Hitec 38 mm servo arm with ball link
1 x Futaba 46 mm servo arm with ball link
1 x Sanyo RX Battery Eneloop 6,0 V Futaba
1 x Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs)
1 x Pushrod octagone 4/3
1 x Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
1 x Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs)
1 x Sanyo TX Battery Eneloop 9,6 V 2500 mAh
1 x Landing gear frontal support 25x32x16
1 x Servo arms set 40/50/55/5055 MG
1 x Allen wheel collar M4x4
1 x Servo DL3017 Digi 17Kg-0.15s/60º
1 x Propeller diller for EME35 and DLE35
1 x Ventus 1:4 set of instruments
1 x Propeller diller 5/6,3/8/9
1 x Horns set HS-65HB/MG, 5065MG
1 x Mold plugs XT-30
1 x Propeller diller for DLE170
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x USBCOM 5i
1 x Pilot "Duke" Legends Series (Slimline)
1 x Battery LiPo GRE18 600 mAh 7.4v
1 x Pin hinge 26x11 mm (10 uds)
1 x Propeller 3x3
1 x ULTIMATUM 2.0 PRO "McLAren"
1 x Large flex hinge (12 uds)
1 x Propeller 11x4,7 SlowFlyer
1 x Press fitting for 1,0 diam. steel cable (10 pcs)
1 x FIALA Propeller 23x8 Electric
1 x ULTIMATUM 2.0 m Red Bull
1 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x ULTIMATUM 2.0 m yellow/blue
1 x Cockpit plastic closing
1 x Servos security connector (2 pcs)
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x Z Bender - S Type Tool
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x Z Bender - S Type Tool
16,407.15EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies