1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x SIMtransmitter 6 Mode 2
1 x BALSA trip 5.0x5.0x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
2 x Liston HAYA 10 x 10 x 1000 mm
3 x BALSA trip 3.0x3.0x1000 mm
1 x BALSA trip 10x10x1000 mm
1 x Stickers-digit for marking
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
2 x Beech dowels 10 mm x 1000 mm
2 x BALSA trip 4.0x4.0x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x Beech dowels 3.0 x 1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Walnut wood slat 1.5x1.5x1000 mm
2 x Walnut wood slat 2.0x2.0x1000 mm
2 x BALSA triangular 10x10x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
2 x BALSA trip 3.0x5.0x1000 mm
1 x Walnut wood slat 3.0x3.0x1000 mm
2 x Linden wood slat 3.0x3.0x1000 mm
2 x Pine wood slat 6.0x6.0x1000 mm
1 x Extractor piñones 2.3/3.2 mm
1 x 1/10 Pilot "Jack"
1 x 1/12 Pilot "Fighter"
2 x Civilian pilot "Pamela" size 9cm (Slimline)
2 x 1/12 Pilot "Langley"
1 x 1/6 Pilot "Garry"
1 x Piloto JET 1:3,5
1 x Piloto Jet "Green" 1/6 Scale
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Horn with ball 55x40
1 x Field folding model stand
2 x GameCommander USB Universal
1 x Sanyo RX Battery Eneloop 6,0 V JR
1 x Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x Sanyo RX Battery Eneloop RX 4,8 V Futaba
1 x BALSA triangular 15x15x1000 mm
1 x Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x Balsa panel 1.0x100x1000 mm
1 x Mini neumatic retract 3 mm landing gear (Het-rc)
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Pilot JAN 1/4 Saiplanes
1 x Pilot "Dick" Legends Series (Slimline)
3 x Militarian pilot "Kamikaze" size 9cm (Slimline)
2 x Extension silicon 10 cm (Futaba)
1 x Cable silicona female batt. receptor 30 cm (Futaba)
3 x Extension silicon 10 cm (Graupner)
1 x Extension silicon 30 cm female (Futaba)
1 x Adapters for 7.5 - 35cc aircraft and naval engines
1 x Head lower part New
2 x Pilot "Duke" Legends Series (Slimline)
1 x Blade holder lower
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x 1/12 Pilot "Cougar"
1 x Head core
1 x Ball joint long
2 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
1 x Screws flush mount M2
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x Head runner
2 x Extension 90 cm (Futaba)
3 x Skies 2x 335 mm + 1x Esqui 250mm
3 x Extension silicon 35 cm male (Futaba)
1 x Extension silicon 50 cm (Futaba)
2 x Cabel "Y" 30 cm (Futaba)
1 x DUPLEX 2.4GHz GPS
1 x DUPLEX 2.4EX Central Box 210
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x DSM 10 Dual Switch Mixer
1 x DUPLEX 2.4EX MULi 6s M
1 x DUPLEX 2.4 EX MVario2
1 x DUPLEX 2,4GHz MRPM-AC EX
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x DUPLEX 2.4EX MUI 150 Sensor
1 x DUPLEX 2.4EX MFlow2 Gas 800
1 x Car Charger DC/DS-16
1 x DUPLEX 2.4EX MT 125 temperature sensor
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x DUPLEX 2.4 EX MBar
2 x Antenna holder bracket double
1 x Head upper part
1 x Balsa panel 3.0x100x1000 mm
1 x Central support Speed 280
1 x 
1 x AXI 2814/20 V2
1 x AXI 2826/8 V2 Long
1 x Extension silicon 50 cm (Graupner)
1 x 200 mm extensión servo HITEC/JR
1 x Extension 100 cm (Futaba)
1 x Axi for MVVS 3.5 Sport
1 x Extension silicon 25 cm (Graupner)
2 x Extension silicon 30 cm female (Graupner)
2 x Extension silicon 30 cm male (Futaba)
1 x Electric Landing Gear ODYSSEY (Elektron Retracts)
1 x Radial Mount Set for AXI2814 and AXI2820 V2
1 x Wheel 75 mm with electromagnet and brake disk (2 uds)
1 x MOTOR MOUNT RODS AXI 53XX AND AXI 81XX 60MM (4PCS)
1 x Brake disc Electron Retracts
1 x Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts)
1 x ER-50eVo Set A [2x ER50 + RB-45]
1 x Cable video GoPro and 5V cable
1 x F450/550 Quadcopter, landing gear
1 x Spare Part Frame Set for EACHINE RACER 250
1 x APM2.6 Power module with 5.3V DC BEC
1 x Lite Plywood panel 600x300x3.0 mm
1 x Cierva C30 simulated motor
1 x A/C quality beech plywood 600x300x5.0 mm
1 x A/C economy plywood 600x300x6+.0 mm
1 x Bearing 3x6x2,5
1 x A/C quality beech plywood 600x300x5.0 mm
1 x Birch plywood plate 600x300x2.0 mm
1 x AXI 2217/16 V2 Long
1 x Frontal support Speed 600
1 x AXI 2820/14 V2
1 x AXI 2820/8 V2
1 x AXI 2212/12 V2
1 x 10 mm gas motor standoff
1 x Cooler motor type 280
1 x Size "M" motor holder for class 400
1 x Motor mount M
1 x Size "M" motor holder for class 600
1 x Extension silicon 75 cm (Futaba)
1 x Cabel "Y" 30 cm (graupner)
2 x Futaba Female 40 cm extension
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Motor Set CHALLENGER Indoor
1 x Motor MVVS 2.0/1120
1 x Radial mount for electric 2.5-5.6
1 x CHALLENGER Indoor
1 x CRACK YAK (Mini) 600 mm
1 x Circlick securite
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
2 x Extension 30 cm (Futaba)
1 x ASG 32 560 mm
1 x Extension silicon 100 cm (Futaba)
1 x Extension lead 15 cm Multiplex
1 x Extension PVC 150 cm (Graupner)
1 x Futaba Female 40 cm extension
1 x Extension silicon 25 cm (Futaba)
1 x Motor MVVS 5.6/690 GLIDER
1 x Extension 7.5 cm
1 x Black 2,4 GHz antenna exit guides (2 pcs)
1 x QUANTUM II 55 Brushless Motor
1 x E_brakes electronics
1 x Motor holder AXI
1 x Manual Controller
1 x Set Legs + Wheels with brake ASPIRE
1 x Electric Landing Gear ASPIRE (Elektron Retracts)
1 x 10-15mm Servo Arm HITEC
1 x ER-40eVo Set B [Complet Set + GS200]
1 x Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re
1 x Frontal Adapter for AXI53xx
1 x Wheel 115 mm with electromagnet and brake disk (2 uds)
1 x Prop Holder AXI 41xx V2
1 x PC-21 2880 mm Tren aterrizaje electrico(Electron Retracts
1 x Electric Landing Gear ODYSSEY +GS200 (Elektron Retracts)
1 x Wheel Ø 90 mm (1 ud) Electron Retracts
1 x Actuator Electric 25 mm
1 x Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x Electric Landing Gear AVANTI XS (Elektron Retracts)
1 x RB-45 Electronic
1 x ER40 Front Leg (with wheel 80mm)
1 x Prop Saver for AXI 22xx/xx
1 x AXI Cooler 22xx
1 x Electric Landing Gear BULL Mo1 2.6 (Elektron Retracts)
1 x Ball Link ALU M3 - RH (1 pcs)
1 x AXI Cooler 41xx
1 x Digital weight, angle and balance meter BASIC
1 x 10-15mm Servo Arm
1 x Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re
1 x GS-200 Electronic
1 x Retract/Brake Cable
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x Universal Prop Saver
1 x PH5 adapter for 5mm M8 axi for AXI2820 y 2826
1 x Wheel Ø 75 mm (1 ud) Electron Retracts
1 x Electromagnets brake
1 x Focke Wulf FW-190A-8 93", Electric retract Landing gear
1 x ASPIRE Blue ARF 2.000 mm
1 x 1/7 Pilot "Japanese"
1 x Servo Fork
1 x Blade holder upper
1 x Receptor CORE PBR-26XS 26ch
21,959.29EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies