1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Ventus 1:4 set of instruments
1 x Motor A2212/13T
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Straightened threaded rod M3 - 1m
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
2 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
2 x Straightened rod Ø 4.5 mm x 1000 mm
2 x Jeti Black cap
1 x Round Rod 3,0x1000 mm
1 x GameCommander USB Universal
1 x Truck-trailer for gliders 720 x 239 mm
1 x 38x4,5 mm wires output (2 pcs)
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x MULTIPLEX ALUMINUM CASE "M-LINK"
1 x Futaba Radio Case
1 x Futaba Aero Large Case - Internal Foam
1 x Transmitter Balancer Futaba T-10CG
1 x Switch moment button, 2 functions, long FUTABA
1 x Charger FUTABA SQN30W12P-08 220v
1 x Vacuum bag, 1200 mm x 50 m
1 x Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Thermoforming sheet 0.5mm (0.02in) DIN A4
1 x Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x Release film 100 cm x 50 m
1 x Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
2 x Glider IKARUS
1 x Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm
1 x Straightened threaded rod M2-1m
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Landing gear axle Ø 4 mm (2 uds)
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
2 x 400 Newtons FEMA absorber
2 x Extractor piñones 2.3/3.2 mm
2 x X-RAY Micro QR (Fuselage with canopy)
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x BABY glider (Aero-naut)
2 x X-RAY Micro QR (Tail Tube)
1 x Soporte servo KST X10 mini / DS135MG
1 x Miniature brass strap hinge, 1 m
2 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
2 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Servo KST X15-1208 V8.0 13.5Kg HV
2 x Device Terminal
1 x Keypad ALTIS V4
1 x 100 Newtons FEMA absorber
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Telemetry interface ALTIS 12 cm
1 x 73x24 mm hard foam KOVO wheel (2 pcs)
1 x Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.)
1 x Receiver FUTABA R6004 FF FAST
1 x EDGE 540-A 91" (2310 mm)
1 x EDGE 540-A 74" (1880 mm)
1 x Receiver Futaba R1008SB 8-channel 2.4 GHz FHSS
1 x Receptor FUTABA R7006SB FASSTest/FASST
1 x Slider Extenion for CORE
1 x Antena FUTABA R7108/7014/7114SB (1 pc)
2 x 25 mm reinforced hinge
2 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x MZ-10, 5 Channel HoTT
1 x Teacher-Pupil-cable all FrSky Transmitter
1 x TARANIS Q X7
1 x MZ-18, 9 Channel HoTT
1 x TX-Tray V1 (L) (Red)
1 x TARANIS X9D - plus EU/LBT FrSky complete set w. travel case incl
1 x PROPELLER ELECTRIC glass 9,5x6
1 x Propeller electric carbon 7x7
1 x Propeller MEJZLIK 22x10 Electric light (36 g)
1 x Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13
1 x Blind nut M6 (4 pcs)
1 x DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x 6 mm aluminium horn with patella
1 x 6 mm red aluminium threaded horn with patella
1 x DPSI magnetic switch actuator (PCB)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Glider STROLCH
1 x Transmitter GRAUPNER MZ-24 Pro
1 x Distanzstück motor OS 120 AX
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
2 x Flap hinge 33x9 mm (6 pcs)
1 x Beech dowels 2.0 x 1000 mm
1 x Propeller hub spacer 8/5.5
1 x DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS
1 x 127x43 Ø6.0 mm aluminium core wheel
1 x Hovercraft sailcloth
1 x 2.5 inch aluminium core wheel (1 pcs)
1 x Foam wheel Ø 351 mm (2 pcs)
1 x Crystal Universal RX 35.140 Ch 74
1 x DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS
1 x 16x10 tree blades propeller Master Airscrew
1 x Xoar Electric Beechwood Prop 12x6
1 x Propeller POWER-PROP 10x7
1 x Propeller POWER-PROP 12x8
1 x Xoar Electric Beechwood Prop 24x8
1 x Propeller POWER-PROP 12x6
1 x Propeller POWER-PROP 10x7 Izda
1 x Propeller POWER-PROP 11x9
1 x 12x6 tree blades propeller
1 x 8x6 tree blades propeller
1 x Porpeller HUNTER 480
1 x Propeller POWER-PROP 13x10
1 x Propeller MEJZLIK 20x10 Electric light (36 g)
1 x 21x14 Falcon electric carbon prop (64 g)
1 x Landing gear axle 4x21 4 mm (2 uds)
1 x Servo KST X06H - 1.8Kg.cm 7mm 6g
1 x Servo KST DS125MG servo ala 10mm 28g 7Kg
1 x Servo KST A08H V6.0 3,2Kg HV
1 x Landing gear axle Ø 5 mm (2 uds)
2 x Glider KNIRPS
1 x Servo-V-Limiter 5.2V
1 x DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x DPSI RV Mini 6 Magic with Gas-Cap switch
1 x 100 mm rods + T patellas set for direction control
1 x 140 mm rods set for direction control
1 x Optotronix X-Carrier
1 x Micro flex hinge (12 uds)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Large flex hinge (12 uds)
1 x 15 mm reinforced hinge
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Pin type hinge Al 6x98 mm (2 pcs)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Interruptor FUTABA FX-MZ (2 Posic. corto)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x Long pinned hinge (6 uds)
1 x Long pinned hinge (12 uds)
1 x Small pinned hinge (12 uds)
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x UMX™ Whipit™ DLG BNF Basic (E-flite)
1 x X-RAY Micro QR
1 x DINO Glider ARC
1 x BABY glider drawings (Aero-naut)
1 x E-FUN BUG (ROI-Import)
1 x X-RAY Micro QR (Elevator)
1 x 40,0 mm hydro-propeller (left hydropropeller)
1 x Propeller Pleg CAM-Prop 10x6 + Spinner
1 x 3 mm Long Prop Adapter M5
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x 2 mm Prop Adapter M5
1 x Adapter 3,2 mm M8
1 x Couple M4 for wire (10 pcs)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Beech dowels 3.0 x 1000 mm
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Adapter 3,2 mm M6
1 x 89x32 mm (3.5") axle Ø5 mm aluminium core wheel
1 x Wheel FEMA 178 mm / 8 mm
1 x Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds)
1 x Wheel FEMA 127 mm / 6 mm
1 x EasyFLY Addon
1 x Nose wheel 62 mm
1 x Crystal Universal TX 35.140 Ch 74
1 x LA500 pilot-seat set
1 x Teflon rollers 40 mm x 15 mm Diam.
8,965.74EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies