1 x | Ventus 1:4 set of instruments |
1 x | Motor A2212/13T |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Straightened threaded rod M3 - 1m |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
2 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
2 x | Straightened rod Ø 4.5 mm x 1000 mm |
2 x | Jeti Black cap |
1 x | Round Rod 3,0x1000 mm |
1 x | GameCommander USB Universal |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | MULTIPLEX ALUMINUM CASE "M-LINK" |
1 x | Futaba Radio Case |
1 x | Futaba Aero Large Case - Internal Foam |
1 x | Transmitter Balancer Futaba T-10CG |
1 x | Switch moment button, 2 functions, long FUTABA |
1 x | Charger FUTABA SQN30W12P-08 220v |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Release film 100 cm x 50 m |
1 x | Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar |
2 x | Glider IKARUS |
1 x | Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm |
1 x | Straightened threaded rod M2-1m |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
2 x | 400 Newtons FEMA absorber |
2 x | Extractor piñones 2.3/3.2 mm |
2 x | X-RAY Micro QR (Fuselage with canopy) |
1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
1 x | BABY glider (Aero-naut) |
2 x | X-RAY Micro QR (Tail Tube) |
1 x | Soporte servo KST X10 mini / DS135MG |
1 x | Miniature brass strap hinge, 1 m |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Servo KST X15-1208 V8.0 13.5Kg HV |
1 x | Device Terminal |
1 x | Keypad ALTIS V4 |
1 x | 100 Newtons FEMA absorber |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Telemetry interface ALTIS 12 cm |
1 x | 73x24 mm hard foam KOVO wheel (2 pcs) |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.) |
1 x | Receiver FUTABA R6004 FF FAST |
1 x | EDGE 540-A 91" (2310 mm) |
1 x | EDGE 540-A 74" (1880 mm) |
1 x | Receiver Futaba R1008SB 8-channel 2.4 GHz FHSS |
1 x | Receptor FUTABA R7006SB FASSTest/FASST |
1 x | Slider Extenion for CORE |
1 x | Antena FUTABA R7108/7014/7114SB (1 pc) |
2 x | 25 mm reinforced hinge |
2 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | MZ-10, 5 Channel HoTT |
1 x | Teacher-Pupil-cable all FrSky Transmitter |
1 x | TARANIS Q X7 |
1 x | MZ-18, 9 Channel HoTT |
1 x | TX-Tray V1 (L) (Red) |
1 x | TARANIS X9D - plus EU/LBT FrSky complete set w. travel case incl |
1 x | PROPELLER ELECTRIC glass 9,5x6 |
1 x | Propeller electric carbon 7x7 |
1 x | Propeller MEJZLIK 22x10 Electric light (36 g) |
1 x | Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13 |
1 x | Blind nut M6 (4 pcs) |
1 x | DPSI Micro-DualBat 5.9V / 7.2V MPX-JR |
1 x | 6 mm aluminium horn with patella |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | DPSI magnetic switch actuator (PCB) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Glider STROLCH |
1 x | Transmitter GRAUPNER MZ-24 Pro |
1 x | Distanzstück motor OS 120 AX |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
2 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Propeller hub spacer 8/5.5 |
1 x | DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | Hovercraft sailcloth |
1 x | 2.5 inch aluminium core wheel (1 pcs) |
1 x | Foam wheel Ø 351 mm (2 pcs) |
1 x | Crystal Universal RX 35.140 Ch 74 |
1 x | DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS |
1 x | 16x10 tree blades propeller Master Airscrew |
1 x | Xoar Electric Beechwood Prop 12x6 |
1 x | Propeller POWER-PROP 10x7 |
1 x | Propeller POWER-PROP 12x8 |
1 x | Xoar Electric Beechwood Prop 24x8 |
1 x | Propeller POWER-PROP 12x6 |
1 x | Propeller POWER-PROP 10x7 Izda |
1 x | Propeller POWER-PROP 11x9 |
1 x | 12x6 tree blades propeller |
1 x | 8x6 tree blades propeller |
1 x | Porpeller HUNTER 480 |
1 x | Propeller POWER-PROP 13x10 |
1 x | Propeller MEJZLIK 20x10 Electric light (36 g) |
1 x | 21x14 Falcon electric carbon prop (64 g) |
1 x | Landing gear axle 4x21 4 mm (2 uds) |
1 x | Servo KST X06H - 1.8Kg.cm 7mm 6g |
1 x | Servo KST DS125MG servo ala 10mm 28g 7Kg |
1 x | Servo KST A08H V6.0 3,2Kg HV |
1 x | Landing gear axle Ø 5 mm (2 uds) |
2 x | Glider KNIRPS |
1 x | Servo-V-Limiter 5.2V |
1 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
1 x | DPSI RV Mini 6 Magic with Gas-Cap switch |
1 x | 100 mm rods + T patellas set for direction control |
1 x | 140 mm rods set for direction control |
1 x | Optotronix X-Carrier |
1 x | Micro flex hinge (12 uds) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Large flex hinge (12 uds) |
1 x | 15 mm reinforced hinge |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Interruptor FUTABA FX-MZ (2 Posic. corto) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Long pinned hinge (6 uds) |
1 x | Long pinned hinge (12 uds) |
1 x | Small pinned hinge (12 uds) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | UMX™ Whipit™ DLG BNF Basic (E-flite) |
1 x | X-RAY Micro QR |
1 x | DINO Glider ARC |
1 x | BABY glider drawings (Aero-naut) |
1 x | E-FUN BUG (ROI-Import) |
1 x | X-RAY Micro QR (Elevator) |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
1 x | 3 mm Long Prop Adapter M5 |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
|
8,431.55EUR |