1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Arandela conica alumino M3 verde (8 pcs)
1 x Arandela conica alumino M3 negro (8 pcs)
1 x Arandela conica ancha alumino M3 rojo (4 pcs)
1 x Arandela conica alumino M3 rojo (8 pcs)
1 x Arandela dentada 2.7 mm (20 pcs)
1 x Circlick para eje 2.3 mm (10 pcs)
1 x Arandela abierta 4.1 mm (20 pcs)
1 x Arandela dentada 3.2 mm (20 pcs)
1 x Arandela conica ancha alumino M4 Negro (4 pcs)
1 x Arandela de bloqueo 2.5 mm (10 pcs)
1 x Arandela abierta 2.1 mm (20 pcs)
1 x Circlick para eje 1.5 mm (10 pcs)
1 x Arandela 1.7 mm (20 pcs)
1 x Arandela abierta 2.6 mm (20 pcs)
1 x Arandela 2.2 mm (20 pcs)
1 x Arandela conica alumino M4 verde (8 pcs)
1 x Arandela de bloqueo 2 mm (10 pcs)
1 x Arandela dentada 2.2 mm (20 pcs)
1 x Arandela conica ancha alumino M4 Rojo (4 pcs)
1 x Arandela de goma M3-M4 (8 pcs)
1 x Arandela de bloqueo 1.5 mm (10 pcs)
1 x Arandela conica alumino M4 azul (8 pcs)
1 x Arandela dentada 4.3 mm (20 pcs)
2 x Motor DLE 200cc Std
1 x Silent-blocks DLE 170M
1 x Motor DLE 200cc Premium Muffler
1 x Corona pequeña autoarranque DLE-170M
1 x Motor DLE 170 M - Paramotores
1 x Acoplador M2,5 Ø 2 mm (10 pcs)
2 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Acoplador Micro M2 Ø 1 mm (10 pcs)
2 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Acople ALU M2,5 Ø 4 (2 uds)
2 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Ball link aluminio M3 V1 azul (10 pcs)
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
2 x Ball link aluminio M3 V1 (10 pcs)
1 x Acoplador M3 (10 uds)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Acoplador M2 (10 uds)
1 x Acoplador "Z" Ø 1 (2 uds)
1 x Acople ALU M2 Ø 4 (2 uds)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Acople ALU M3 Ø 4 (2 uds)
1 x Liston ABS 1,0x2,0x1000 mm
1 x Liston ABS 2.0x5.0x1000 mm
1 x Perfil de ABS cuadrado 2 x 1000 mm
1 x Bisagra de aluminio tipo PIN 3,0x50 mm desmontable (2 pcs)
1 x Tubo ABS 14,0x10,0x1000 mm
1 x Rótula con bola plana M3 (10 pcs)
1 x Alicate para "Ball-Link"
1 x Hoja de sandwich de fibra de carbono 350x150x3 mm
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Circlick para eje 1.9 mm (10 pcs)
1 x Motor DLE 430 cc - Paramotores
1 x APM2,6 Power module con BEC 5,3 V DC
1 x Helice FALCON 20x9 carbono-gas
1 x Set brazos EACHINE RACER 250
1 x Arandela de bloqueo 3.5 mm (10 pcs)
1 x Acople ALU M2,5 Ø 6 (2 uds)
1 x Terminales riostras M3 (10 uds)
1 x Hélice CAM-Carb-Light 12x5" (Hélice derecha)
1 x Set clevis para pull-pull (TY13233 y TY13234)
1 x Tensor de riostras M1,6x20/30 (2pcs)
1 x Hélice CAM-Carb-Light 13x6" (Hélice izquierda)
1 x Hélice CAM-Carb-Light 9x5" (Hélice izquierda)
1 x Acoplador para cable M4 (10 pcs)
1 x Ball link ALU M3/2 con rodamiento (1 pcs)
1 x Kwik link AL M4 con Clip (2 pcs)
1 x Round Rod 1,0x3,5 cm
1 x Helice CAM-Carb-Light 9x5" PHANTOM (Helice derecha)
1 x Hélice CAM-Carb-Light 8x4,5" (Hélice izquierda)
1 x Pull-Pull set completo acero inox. 3 m (max 20 kg)
1 x Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x Hélice CAM-Carb-Light 11x7"
1 x Crimping sleeves para cables de 1.1 mm (10 pcs)
1 x Hélice CAM-Carb-Light 9x5" (Hélice derecha)
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Hélice CAM-Carb-Light 10x4.5" (Hélice derecha)
1 x Helice CAM-Carb-Light 9x5" PHANTOM (Helice izquierda)
1 x Acople ALU M3 Ø 6 (2 uds)
1 x Epoxy SLOW-CURE™ 30 min (260g)
1 x Microbalones (2.5g/cm3 - Aprox 1L)
1 x Ciano SUPER - GOLD™ THIN (12g)
1 x Pegamento FOAM - CURE™ (24g)
1 x Canula repuesto
1 x Epoxy MID-CURE™ 15 min (130g)
1 x Polvo de algodon 500g
1 x Epoxy QUIK-CURE™ 5 min (260g)
1 x Sensor RPM Optico para Dinamometro
1 x DINAMOETRO S-1580
1 x T-Motor MN705-S Kv125 (pack 2 uds)
1 x Plancha de goma espuma (310x210x3 mm)
1 x Helice FALCON 26x10 carbono-gas
1 x Helice FALCON 25x9 carbono-gas
1 x Helice FALCON 27x10 3-BL carbono-gas
1 x Polea de bronce 2,5/1 (2 pcs)
1 x Kwik link con brazo M5xM2,5xL30
1 x Pin 2,5 terminales riostras M2,5 ⌀ (6 pcs)
1 x Polea de bronce 16/2 (2 pcs)
1 x Listón de HAYA redondo 2,0 x 1000 mm
1 x Tubo carbono (L 1000 mm, Ø16 mm, Ø12 mm)
1 x Tubo aluminio (L 1000 mm, Ø3,0 mm, Ø2,1 mm)
1 x Capuchón decorativo interruptores TX
1 x DJI Mavic Air Fly More Combo
1 x Polea de bronce 4/1,5 (2 pcs)
1 x Varilla mando roscada M2,5 (2 uds)
1 x Brazo servo aluminio 15-10 mm Futaba/MKS/Savox
1 x Acoplador "Z" Ø 2 (2 uds)
1 x Polea de bronce 2,5/1 (2 pcs)
1 x Porta kwiw link M2,5 (10 pcs)
1 x Tapon 22 mm con espiga (Electron)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Terminales riostras M2 (10 uds)
1 x Tren aterrizaje Electrico AVANTI XS (Electron Retracs)
1 x Porta Kwik link M3 3 mm (2 pcs)
1 x Porta Kwik link M4 4 mm (2 pcs)
1 x Tren aterrizaje Electrico "Black Edition" ULTIMATUM 2.0 (Electro
1 x Lija cóncava-convexa con papel de 13 mm
1 x BETA 1400 RTF Red
1 x Ciano KAVAN Thin 20g
1 x Thixotropic agente TM100, tin/415g (aprox. 5 L)
1 x Microbalones (0.12g) 400 g (aproxx 3.3 l)
1 x Sistema doble de alimentación RX
1 x GPS Logger Dymond
1 x Terminales riostras M3x16 (2 uds)
1 x Terminales riostras M6x66 (2 uds)
1 x Tren delantero 155 mm con rueda 70 mm
1 x Rueda superlight deluxe 150 mm hinchable (2 pcs)
20,855.12EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas