Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Servo HITEC D89 MW
62.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

3 x	Bisagra de compuerta 30x16 mm (2 pcs)
3 x	Bisagra 15 mm reforzada
1 x	Bisagra de aluminio desmontada 6x98 mm (2 pcs)
2 x	Bisagra de nylon flaps 33x9 (2 pcs)
1 x	Bisagra cilíndrica 67 mm Ø 4,5 mm (5 pcs)
2 x	Bisagra cilíndrica 43 mm Ø 2,5 mm (5 pcs)
2 x	Bisagra de Flaps (6 uds)
1 x	Bisagra de compuerta aluminio (1 pcs)
1 x	Bisagra cilíndrica 3,0 Ø x 10 x 48 mm (10 pcs)
2 x	Bisagra larga con pin metalico (12 uds)
2 x	Bisagra larga con pin metalico (6 uds)
2 x	Bisagra papel CA (12 uds)
2 x	Bisagra correa de latón en miniatura 1m
2 x	Bisagra de aluminio tipo PIN 4,5x70 mm desmontable (2 pcs)
1 x	Bisagra de aluminio tipo PIN 4,5x70 mm (2 pcs)
1 x	Bisagra Cabina Discus 2c, 2a, Ventus 2cx (2 pcs)
2 x	Bisagra de nylon 20x20x0,3 (10 pcs)
2 x	Bisagra cilíndrica 33 mm Ø 2 mm (5 pcs)
2 x	Bisagra de aluminio tipo PIN 6x98 mm (2 pcs)
1 x	Bisagra pequeña con pin metalico (12 uds)
2 x	Bisagra de compuerta negra 30x16 mm (2 pcs)
2 x	Bisagra de Flaps 33x9 mm (6 uds)
2 x	Bisagra cilíndrica 48 mm Ø 2,5 mm (5 pcs)
1 x	Sensor digital Air Speed con Pitot
1 x	Carro remolque para veleros 720 x 239 mm
2 x	Soporte para aviones SebArt
1 x	Carro remolque para veleros 720 x 285 mm
1 x	Equilibrador hélices
1 x	Medidor angulos tamaño pequeño
2 x	Soporte WingFix ULTRA BE
1 x	Medidor ángulos
1 x	Tubo Pitot para PIXHAWK
1 x	Banda lijado g. 120 para BSL 220/E (5 pcs)
1 x	Oracover Naranja 2 m
1 x	Prolongador silicona 100 cm (Graupner)
1 x	Horn aluminio anodiazado 6 mm azul con rótula
1 x	Horn control flaps (1 pcs)
1 x	Ball link aluminio M3 V1 (10 pcs)
2 x	Bisagra de aluminio tipo PIN 3,0x50 mm desmontable (2 pcs)
2 x	Bisagra de nylon flaps/compuertas 27x10,5 (2 pcs)
2 x	Bisagra de nylon 20x15x0,3 (10 pcs)
2 x	Resina Epoxy L-385 (625 g)
1 x	Motor OS 3820-1200 eléctrico
1 x	Resina Epoxy L-385 con catalizador H385 (3.5 kg total)
1 x	Bisagra de compuerta/Flaps
3 x	Microbalones (0.12g) 400 g (aproxx 3.3 l)
1 x	Bisagra pin 34x16 mm (10 uds)
2 x	Microbalones (0,12 g) 350 ml
2 x	Bisagra Micro flexible (12 uds)
2 x	Acelerador Aero EPH 161 (500 g)
1 x	UHU hart 35 g
1 x	UHU Por 50ml/40g
1 x	Bisagra cilíndrica 2,5 Ø x 8 x 33 mm (10 pcs)
1 x	Guardabarros ruedas 112/127 mm
1 x	Tren retráctil veleros 8-16 Kg 2.5-3.2 (rueda 127 mm)
2 x	Hélice sistema de paso variable 9" para Axi VPP (recambio)
1 x	Fibra vidrio trenzada "manga" 45 mm x 10m
1 x	Rodillo teflon 40 mm x 15 mm Diam.
1 x	Malla PVC cuadrada 290x185x0,32 mm
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x	PET film Mylar® A 350, 50 cm, roll/ 2 m
1 x	Tren retráctil veleros 8-16 Kg 2.5-3.2 (rueda 140 mm con freno)
1 x	Actuador electrico 25 mm
2 x	Palas de autogiro de 330 mm
1 x	Tren retráctil veleros 3-7 Kg 3.8-4.3 (sin rueda) 70-82 mm
1 x	Equilibrador hélices
1 x	PIX Hawk con accesorios
1 x	EasyFLY Addon
1 x	Rótula con bola M2 (10 pcs)
2 x	Bisagra Redonda flexible (12 uds)
1 x	Bisagra Pequeña flexible (12 uds)
1 x	Hardener P-25, canister 2.5Kg
1 x	Resina Epoxy L-385 con catalizador H385 (875 g total)
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x	Endurecedor MEKP 100 g
1 x	Bisagra de aluminio tipo PIN 3,0x50 mm (2 pcs)
1 x	Rótula corta M2 con bola/tornillo (6 uds)
1 x	Rótula MAXI sin bola M3 (2 uds)
2 x	Bisagra pin 39x20 mm (10 uds)
1 x	Rótula M3
1 x	Rótula M3 RPA's-UAV's
1 x	Bisagra Larga flexible (12 uds)
1 x	Rótula corta M3 con bola/tornillo (6 uds)
1 x	Rótula con rodamiento M2,5 22x5,5
1 x	Bisagra PIN 4.7 mm (5 pcs)
1 x	Rótula larga M1.6 con bola/base (6 uds)
1 x	Rótula M3
1 x	Rótula V3 aluminio M2,5 Diam (2 pcs)
2 x	Rótula con bola plana M3 (10 pcs)
1 x	Rótula larga M3 con bola/base, tornillo y tuerca (6 uds)
1 x	Rótula V1 corta M2/M1,6 3Diam negra (6 pcs)
1 x	Rótula MAXI con bola/saliente M3 (2 uds)
1 x	Rótula metálica M3/3 azul (2 pcs)
1 x	Rótula V3 aluminio M2,5 5Diam (2 pcs)
1 x	Rótula V3 aluminio M2,5 / 5 Diam con base corta (2 pcs)
1 x	Rótula con rodamiento M2 22x5,5
2 x	Bisagra pequeña con pin metalico (6 uds)
2 x	Rótula V2 M2 5Diam negra (2 pcs)
1 x	Rótula V1 larga M2/M1,6 3Diam negra (2 pcs)
1 x	Rótula V1 corta M2/M1,6 3Diam negra (2 pcs)
2 x	Rótula M3 con tornillo y tuerca(6 uds)
1 x	Rótula con rodamiento M3 22x5,5
2 x	Rótula INDUSTRIAL con bola M3 (2 uds)
1 x	Bisagra papel lite CA (12 uds)
1 x	Rótula MAXI con bola/tornillo M3 (2 uds)
1 x	Rótula 6 mm con bola M3 (10 pcs)
1 x	Rótula V3 aluminio M2,5 Diam con base corta (2 pcs)
1 x	Thixotropic agente TM100, tin/75g (aprox. 1 L)
2 x	Polvo de algodon 7 Kg
1 x	Colador RABBIT
1 x	Polvo de algodon 500g
2 x	Thixotropic agente tin/15g (aprox. 350 ml)
1 x	Bujia Ceramica JETCENTRAL
1 x	HDT Jet Central
1 x	Fibra carbono molida 100g
1 x	Microbalones 100g (0.20g/cm3 - Aprox 1L)
2 x	Thixotropic agente TM100, tin/415g (aprox. 5 L)
2 x	Power Pack SE Series JETCENTRAL
1 x	Microbalones (2.5g/cm3 - Aprox 1L)
1 x	Gelcoat blanco 1 Kg
1 x	Pegamento Pu R 50g polyuretano
1 x	Resina Epoxy L-385 (5000 g)
1 x	Autogiro Cierva C30 Spain
1 x	Mamparo posterior
1 x	AIREX® M060 lámina (amarilla) 1200x550x4,0 mm (5 pcs)
1 x	Fibra carbono tela 160g/m2 100 cm x 5 m
1 x	Gafas Nimbus "Black"
1 x	Set montaje amortiguador para modelos 8-16 Kg
1 x	Motor rotor LA-500
1 x	Palanca de dirección
1 x	Enganche de las palas del rotor
1 x	Motor simulado Cierva C30
1 x	Racor 2/3 mm
1 x	Unidad EVP para AXI2208/xx y 2212/xx
1 x	AIREX® M060 lámina (amarilla) 1200x550x6,0 mm (5 pcs)
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (10 pcs)
1 x	Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 50m
1 x	Fibra carbono tela 160g/m2 127 cm x 10 m
1 x	Fibra carbono tela 160g/m2 100 cm x 3 m
1 x	Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 100m
1 x	Cinta carbono TeXtreme 38 g/m2 IM UD 20mm x 100 m
1 x	Fibra carbono tela 160g/m2 100 cm x 25 m
1 x	Brazo de servo agujero 5 mm para FEMA 9810A
1 x	Guardabarros ruedas 140/165 mm
1 x	ER-40eVo Set A [2x ER40 + RB-45]
1 x	Tren aterrizaje Electrico BULL Mo1 2.6 (Electron Retracs)
1 x	Tren aterrizaje Electrico ULTIMATUM 2.0 RS-200 w/o programmer (E
1 x	Amortiguador FEMA 200 Newtons
1 x	Tren aterrizaje Electrico ASPIRE (Electron Retracs)
1 x	Sistema de arranque a bordo (9512)
1 x	Pata delantera ER40 (con rueda 80mm)
1 x	Brazo servo aluminio 15-10 mm HITEC
1 x	Hélice AERO-NAUT M3 30 mm (4 Palas) (Hélice izquierda)
1 x	Sistema de arranque a bordo (9525)
1 x	Acoplador laton Ø 3.0 / 2.3 mm L: 20 mm
1 x	Bomba electrica Fuel 12v
1 x	Rótula metálica M2/2 azul (2 pcs)
1 x	Brazo aluminio ext. carburador
1 x	Depósito de gasolina de 550 cc completo
1 x	Brazo servo aluminio V1-Futaba 23 mm M2 rojo
1 x	Cianocrilato CA Glue (medium) 20g
1 x	Bancada servo tandem 3,5-4" para 2 servos
1 x	Ball link aluminio M3 V1 azul (10 pcs)
1 x	Arandela conica ancha alumino M4 Azul (4 pcs)
1 x	Ball link aluminio M3 V1 rojo (10 pcs)
1 x	Bancada montaje servo M (azul)
1 x	Encendido RCEXL A-02
1 x	Acoplador laton Ø 3 mm L: 20 mm
1 x	Conector ABS "T" 4.0 mm x 1000 mm
1 x	Encendido GLOW 9C + accesorios
1 x	Eje barco Ø4mm de 450x18 mm M4
1 x	Acoplador laton Ø 4.0 / 2.3 mm L: 20 mm
1 x	Bancada servo ala 13 mm
1 x	Arranque electrico BEE (old)
1 x	Rótula con bola M2,5 (10 pcs)
1 x	Rótula con bola M3 (10 pcs)
1 x	Carburador WALBRO para MVVS 26/30/35/40 cc
1 x	Pinza de cierre tubo 6 mm
1 x	Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg

11,273.84EUR