Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA15020

119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

21x14 BIELA propeller (3-blades) Pusher
89.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Copier 5x20 cm pcs
1 x	2,5x60 mm allen screwdriver
1 x	EC-Cutter
1 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	Dremel 3000 130W
1 x
1 x	Digital precision scale up to 2000 g
1 x	Dean-T Plug Mold
1 x
1 x	Dremel PERMAGRIT thin lime
1 x	Ball Link Plier
2 x	Boxed KIT OF 7 Rotary Burrs FINE
1 x	55% silver electrodes (2 pcs)
1 x	Dust collector for mould cleaning
1 x	Dremel PERMAGRIT 18 mm round lime
1 x	ORACOVER Fluor red (2 m)
1 x	Oracover CHROME 2m
1 x	Parachutist
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Tow hook for tug
1 x	Profile ABS half cane 8.0x1000 mm
1 x	Softshell Hispano Aviación
1 x	Vest clothes Hispano Aviación
1 x	Cap Hispano Aviación
1 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x	Lunak ARF 2000 mm Yellow (Hacker Model)
2 x	X-RAY Micro QR (Fuselage with canopy)
2 x	Servo Arm aluminium ALU-STAR
1 x	Canopy Astra
1 x	Glider KNIRPS
1 x	BABY glider drawings (Aero-naut)
2 x	Electric spoiler 250 mm (2 pcs)
1 x	6 mm M3 variable inclined horn
1 x	20 mm carbon horn
1 x	Floating M4 washer pad (36 pcs)
1 x	Blind nut M8 (10 pcs)
1 x	Lock nut M5 (20 pcs)
1 x	Lock nut aluminium M3 (4 pcs)
1 x	5 mm M2 variable inclined horn
1 x	Horn F3A de Titanium 16 mm (2 units)
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Flat washer 3.2 mm (20 pcs)
1 x	Blue Aluminium lock nut M2 (4 pcs)
2 x	Pilatus PC-21 50E BLUE/WHITE (SebArt)
3 x	M3/5Diam metal ball link V3 (2 pcs)
2 x	M2 5Diam short black ball link V2 (2 pcs)
3 x	Socket head ball link M3 (2 uds)
2 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
3 x	M3 Maxi ball link (2 uds)
2 x	Ball link M3 (10 pcs)
2 x	M2,5 Diam metal ball link V3 (2 pcs)
2 x	Ball link M1.6 (6 uds)
3 x	Ball link M3 (6 uds)
2 x	Glider IKARUS
1 x	Electric spoiler 300 mm (2 pcs)
2 x	X-RAY Micro QR (Elevator)
1 x	UMX™ Whipit™ DLG BNF Basic (E-flite)
1 x	GRAFAS MAXI ARF
2 x	IMPULSE 2 F3F
1 x	Q-12 2000 mm Electric
1 x	Z Bender - S Type Tool
1 x	Sub-D Plug Mold
1 x	Smart Soldering Iron 110W/230V AC
1 x	Precision wrench L100 mm
1 x
1 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	Goma arrancador Ø36 mm x 30 mm
1 x	DPSI Ampere battery backer
1 x	Sealing Iron STANDARD
1 x	silverlot 45% - 1,50x500 mm solder rods (2 pcs)
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	CC 05
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	Hot Glue Stick BLACK
1 x	Spare round blades, 28 mm, pack/ 2 pcs.
1 x	Vacuum pump P1-N
1 x	Starter Sullivan-STAR 601
1 x	Screwdriver for Torx® TX8
1 x	Sealing Iron Sleeve STD
1 x	Horn mando small (2 pcs)
2 x	ANGEL 48" pp red/blue/white
1 x	BULL MØ1 2.600mm BLUE
1 x	Avia (Top Model)
1 x	12 mm dogdrive props
1 x	Avia spare blue cockpit (Top Model)
1 x	DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	BULL MØ1 2.600mm "McLAREN-GULF"
1 x	Jet Pipe for ULTIMATUM 2m
1 x	Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
1 x	Albatros ,spare fuselage (Top Model)
1 x	18 mm wing servo holder
1 x	ACTIVE ARF Electric 1.995 mm
1 x	58 mm micro servo cover
1 x	11 mm wing servo holder
1 x	90x75 mm standart servo cover
1 x	Adapter 4,0 mm M6
1 x	BULL MØ1 2.600mm RED
1 x
1 x	Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x	30 mm Alu spinner 3 mm pleg. propeller
1 x	2 mm Prop Adapter M5
1 x	Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x	Adapter 2,3 mm M5 for spinner 30 mm fixed propeller
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re
1 x	Adapter 3,2 mm M8
1 x	DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301)
1 x	Remote electric ignition system
1 x	SATORI 2 PRO V C64 F5J
1 x	Fuselage Bags JEEMO
1 x	Propeller POWER-PROP 7x7
1 x	Spinner propeller pleg. 32 mm / 6,0 mm
1 x	XPower H PROP HUB Ø5.0/20mm +2,5°
1 x	ZEUS F3A 2m
1 x	Lipo KAVAN 5000 mAh 11.1v 40/80C
2 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	M2 5Diam black ball link V2 (2 pcs)
2 x	M3 Maxi ball link (2 uds)
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	Socket head long ball link M3 (6 uds)
2 x	Joint with bearing M2 22x5,5
2 x	Joint with bearing M3 22x5,5
1 x	250 mm / 16 mm Airbrakes
1 x	Mini DART 2 F3K carbon light 1m Green
1 x	PROXXON - DRILL SET 0,5-3,2MM (10PCS.)
1 x	ORCA C64 Pro V 3.6m
1 x	Motor mount EDGE 540 48"
1 x	Jodel D.9 BeBe 2.400 mm Kit
1 x	Wheel Scale 1/3 Vintage 240 mm / 9.33" (1 par)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	CA Glue fast 20g
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Wheel Scale 1/4 Vintage 178 mm / 7" (1 par)
1 x	Mixing tube for double syringes and cartridges (MR 1:1 and 2:1)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Llave dinamomterica 74 Z 0 0 21
1 x	Digital weight, angle and balance meter BASIC
1 x	Mini Infrared Thermomiter
1 x	VAGABOND 1500 mm ARF V2 (Blue)
1 x	THERMIK XL 4000 mm
1 x	JEEMO Kit ARF Basic (2 color) - XTRALIGHT
1 x	Aluminum Fold Prop Spinner 30 mm / 5.0 mm
1 x	Spinner propeller pleg. 38 mm/6,0 mm/5º
1 x	Spinner propeller pleg. 30 mm / 3,2 mm
1 x	Gracia Maxi ARF, bags (Top Model)
1 x	Spinner propeller pleg. 38 mm / 6,0 mm
1 x	Spinner propeller pleg. 30 mm/6,0 mm/0º
1 x	Fundas para el transporte F3A alas
2 x	Ball link M3 RPA's-UAV's
2 x	Socket head ball link M3 (2 uds)
2 x	Blue metalic ball link M3/3 azul (2 pcs)
2 x	Blue metalic ball link M2/2 azul (2 pcs)
2 x	M3/5 Diam metal short ball link V3 (2 pcs)
2 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
2 x	Ball link M3 (10 pcs, flat ball)
2 x	M3 Maxi ball link (2 uds)
1 x	Long ball link M2 (6 uds)
2 x	Joint with bearing M2,5 22x5,5
1 x	Short ball link M2 (6 uds)
2 x	Short ball link M1.6 (6 uds)
1 x	M2,5 5Diam short black ball link V2 (2 pcs)
1 x	Short ball link M3 (6 uds)
2 x	Long ball link M1.6 (6 uds)
1 x	6 mm hexagonal ball link M3 (10 pcs)
2 x	M2,5 5Diam metal ball link V3 (2 pcs)
2 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
2 x	M2,5 5Diam black ball link V2 (2 pcs)
1 x	Ball link M2,5 (10 pcs)
1 x	Propeller MEJZLIK 20x10 Electric light (36 g)
1 x	VPP system propeller for AXI VPP motors (spare)
1 x	Wings Bags JEEMO
1 x	E-FUN BUG (ROI-Import)
1 x	Sliding window 1:2,4 / 1.2,6 Scale
1 x	Glider PIROL
1 x	Chili F3K 2 wing servo mounted
1 x	X-RAY Micro QR (Tail Tube)
1 x	IKURA GPS 4.28 m
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Modelling compound (Plastilin), sculptor's quality 1 Kg
1 x	Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	IKURA 4.0 m
1 x	Pump hose (Ø 6/8 mm) transparent
1 x	Tachometer Hyperion Multi-pala

39,845.33EUR