1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x LiPo Storage Box Standard 1 Type 1
1 x Aluminium battery holder red
2 x LiPo Storage Box Type "P"
1 x Battery bed V2_S (black)
1 x LiPo Storage Box Type "BIG"
1 x Bec MR UBEC 5A (5v/6v/7v)
2 x 2 LiPo XH>EH adapter
2 x CC 05
1 x Adapter lead MPX/EC3
1 x Cabel charger transmitter GRAUPNER
1 x CC 01
1 x 30 cm BEC cable (female)
1 x USB HLS prog. interface
2 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
3 x Circlick securite
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x JETImodel SINGLE BEC
1 x 4 LiPo XH>EH adapter
2 x TrainerCord (master-learner)
1 x CM-3
1 x CC 03
1 x BEC 3A FOXY
1 x TP/TopFuel - XH 2/3S Adapter
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
2 x 3 LiPo XH>EH adapter
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Adapter lead MPX/XT60
1 x Dean "T" - Futaba Adapter
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x 5 LiPo XH>EH adapter
1 x Small pinned hinge (12 uds)
1 x Nylon hinge 15x0,3 (10 pcs)
1 x 15 mm reinforced hinge
1 x Large flex hinge (12 uds)
1 x Flap hinge 33x9 mm (6 pcs)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Gates hinge 30x16 mm (2 pcs)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x Sanyo RX Battery Eneloop 6,0 V JR
1 x Sanyo RX Battery Eneloop RX 4,8 V Futaba
1 x Sanyo TX Battery Eneloop 7,2 V MPX
1 x Sanyo RX Battery Eneloop 6,0 V FUT
1 x Bateria LRP 2200-7.2v 6 cell NiMH
1 x RX Battery Eneloop 4,8 V JR 2500 mAh
1 x Sanyo Eneloop AA 1,2 V 2400 mAh battery
1 x Extension 15 cm (Futaba)
1 x Extension 5 lipos JST/C
1 x JETImodel DPS 40
2 x Extension 5 lipos JST - JST/C
1 x Altimeter Altis NAO
1 x Connector Sub-D 2+5 Female
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Carbon plate 350x150x1.0 mm
2 x Servo KST DS125MG servo ala 10mm 28g 7Kg
1 x Servo KST A08H V6.0 3,2Kg HV
1 x Soporte servo KST X08/H and Plus
2 x Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm
2 x DYNAMOMETER S-1580
1 x Servo KST BLS915 HV V8.0 25Kg 20mm 78g
1 x Servo KST X10-710 V8.0 7.5Kg HV
2 x Flybar support metal LAMA
1 x Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor
1 x Soporte servo KST X10 mini / DS135MG
2 x Servo BLS-M55B 61.2kg
1 x Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x PROFICOVER 5m
1 x Oratex Natural White 20m
1 x PVC termo-retract battery 45 mm black transparent (1 m)
1 x Ply-Span 450x600/13g Red
1 x PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
1 x Support pumb/filter Xicoy X45
1 x Support Flush MPX Conector (6 pcs)
1 x Servo BMS-4112
1 x MPS Gas-Cap-Powerswitch
1 x DPSI RV Mini 5 Magic
1 x DPSI Micro MPS
1 x Emcotec SPS Magnetic Switch Actuator
1 x DPSI RV Mini 6 (2008)
1 x Blind nut M6 (4 pcs)
1 x DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
2 x DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
1 x Black 2,4 GHz antenna exit guides (2 pcs)
1 x DPS Switch JR/JR
1 x Fueling valve "Air"
1 x DPSI RV Mini 6 Magic with Gas-Cap switch
1 x Cover cap drop-shaped paintable 43 mm
1 x Fuel Dot (RED)
2 x DPSI LR-S (with push buttons)
1 x DPSI 2001 RV
1 x FX three-position switched channel, long
1 x 21x14 Falcon electric carbon prop (64 g)
1 x T-shape holder metal LAMA
1 x Propeller APC 12x6 Electric Pusher
1 x Servo KST X15-1208 V8.0 13.5Kg HV
1 x PRO-HV Dual Action Valve
1 x Female connector for 12 pines AWG
1 x Interruptor RX/Batterie
1 x Propeller APC 11x4.5 Electric Pusher
1 x Propeller APC 11x7 SF
1 x 19.5x13 Falcon electric 3-Blade carbon prop (54 g)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Swashplate metal LAMA
1 x Propeller APC 10x3,8 SF
1 x Propeller APC 12x6 SF
1 x Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13
1 x Servo KST X08 Plus 9g HV servo
1 x Outboard Aqua-Race 60
1 x Jet Afterburner Simulator NF-Jet2
1 x NF-3X-80 liner Kit
1 x NF-1 RC set
1 x Receiver R6008HV-A comatible FUTABA
1 x SKY MASTER 3.000 mm ARF
1 x Propeller Pleg CAM Carbon 13x10
1 x Propeller Pleg CAM Carbon 13x8
1 x Propeller CFK 15.5x10
1 x Propeller CFK 15x16
1 x Telemetry interface ALTIS 6 cm
1 x Servo KST MS825 V8.0 35kg 8.4v
1 x Receiver DUPLEX R5L EX 2.4 GHz
2 x Battery EMCOTEC LiIon 3000 7.2v
1 x DPSI magnetic switch actuator (housing)
1 x wing/fuselage connector for 3 pines AWG 20-24
1 x DUPLEX RC Droid Box - DC/DS
2 x PowerFuel RX V2 Fuel Pump
1 x Receptor DUPLEX REX R9 Slim
1 x Avanti S Jet , Field folding model stand (SebArt)
1 x Avanti S Jet, Kerosene+Smoke Tank(SebART)
1 x Jet Afterburner Simulator NF-Jet2YY Set
1 x NF-3XL set
1 x Bidule 55 V3 2460 mm
1 x Bidule 170 ARF 3.48 m
1 x CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9)
1 x PILATUS PC-6 Turbo Porter 33% 5.290 mm
1 x Propeller Pleg CAM Carbon 16x10
1 x Propeller Pleg CAM Carbon 13x11
1 x Propeller Pleg CAM Carbon 12x10
1 x Satellite receiver DUPLEX Rsat 900 NG MHz
1 x Receptor MINIMA 6S HITEC
1 x Avanti S Jet , Exhaust for JetCat P-140 (SebArt)
1 x EWC3 100 cm wing connector
16,926.98EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies