119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x LiPo Storage Box Standard 1 Type 1
1 x Aluminium battery holder red
2 x LiPo Storage Box Type "P"
1 x Battery bed V2_S (black)
1 x LiPo Storage Box Type "BIG"
2 x Bec MR UBEC 5A (5v/6v/7v)
2 x 2 LiPo XH>EH adapter
2 x CC 05
1 x Adapter lead MPX/EC3
1 x Cabel charger transmitter GRAUPNER
1 x CC 01
1 x 30 cm BEC cable (female)
1 x USB HLS prog. interface
2 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
3 x Circlick securite
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x JETImodel SINGLE BEC
1 x 4 LiPo XH>EH adapter
2 x TrainerCord (master-learner)
1 x CM-3
1 x CC 03
1 x BEC 3A FOXY
1 x TP/TopFuel - XH 2/3S Adapter
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
2 x 3 LiPo XH>EH adapter
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Adapter lead MPX/XT60
1 x Dean "T" - Futaba Adapter
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x 5 LiPo XH>EH adapter
1 x Small pinned hinge (12 uds)
1 x Nylon hinge 15x0,3 (10 pcs)
1 x 15 mm reinforced hinge
1 x Large flex hinge (12 uds)
1 x Flap hinge 33x9 mm (6 pcs)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Gates hinge 30x16 mm (2 pcs)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x Sanyo RX Battery Eneloop 6,0 V JR
1 x Sanyo RX Battery Eneloop RX 4,8 V Futaba
1 x Sanyo TX Battery Eneloop 7,2 V MPX
1 x Sanyo RX Battery Eneloop 6,0 V FUT
1 x Bateria LRP 2200-7.2v 6 cell NiMH
1 x RX Battery Eneloop 4,8 V JR 2500 mAh
1 x Sanyo Eneloop AA 1,2 V 2400 mAh battery
1 x Extension 15 cm (Futaba)
1 x Extension 5 lipos JST/C
1 x JETImodel DPS 40
2 x Extension 5 lipos JST - JST/C
1 x Altimeter Altis NAO
1 x Connector Sub-D 2+5 Female
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Carbon plate 350x150x1.0 mm
2 x Servo KST DS125MG servo ala 10mm 28g 7Kg
1 x Servo KST A08H V6.0 3,2Kg HV
1 x Soporte servo KST X08/H and Plus
2 x Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm
2 x DYNAMOMETER S-1580
1 x Servo KST BLS915 HV V8.0 25Kg 20mm 78g
1 x Servo KST X10-710 V8.0 7.5Kg HV
2 x Flybar support metal LAMA
1 x Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor
1 x Soporte servo KST X10 mini / DS135MG
2 x Servo BLS-M55B 61.2kg
1 x Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x PROFICOVER 5m
1 x Oratex Natural White 20m
1 x PVC termo-retract battery 45 mm black transparent (1 m)
1 x Ply-Span 450x600/13g Red
1 x PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
1 x Support pumb/filter Xicoy X45
1 x Support Flush MPX Conector (6 pcs)
1 x Servo BMS-4112
1 x MPS Gas-Cap-Powerswitch
3 x DPSI RV Mini 5 Magic
1 x DPSI Micro MPS
1 x Emcotec SPS Magnetic Switch Actuator
2 x DPSI RV Mini 6 (2008)
1 x Blind nut M6 (4 pcs)
2 x DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
3 x DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
1 x Black 2,4 GHz antenna exit guides (2 pcs)
2 x DPS Switch JR/JR
1 x Fueling valve "Air"
1 x DPSI RV Mini 6 Magic with Gas-Cap switch
1 x Cover cap drop-shaped paintable 43 mm
1 x Fuel Dot (RED)
2 x DPSI LR-S (with push buttons)
2 x DPSI 2001 RV
1 x FX three-position switched channel, long
1 x 21x14 Falcon electric carbon prop (64 g)
1 x T-shape holder metal LAMA
1 x Propeller APC 12x6 Electric Pusher
1 x Servo KST X15-1208 V8.0 13.5Kg HV
1 x PRO-HV Dual Action Valve
1 x Female connector for 12 pines AWG
1 x Interruptor RX/Batterie
1 x Propeller APC 11x4.5 Electric Pusher
1 x Propeller APC 11x7 SF
1 x 19.5x13 Falcon electric 3-Blade carbon prop (54 g)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Swashplate metal LAMA
1 x Propeller APC 10x3,8 SF
1 x Propeller APC 12x6 SF
1 x Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13
1 x Servo KST X08 Plus 9g HV servo
1 x Outboard Aqua-Race 60
1 x Jet Afterburner Simulator NF-Jet2
1 x NF-3X-80 liner Kit
1 x NF-1 RC set
1 x Receiver R6008HV-A comatible FUTABA
1 x SKY MASTER 3.000 mm ARF
1 x Propeller Pleg CAM Carbon 13x10
1 x Propeller Pleg CAM Carbon 13x8
1 x Propeller CFK 15.5x10
1 x Propeller CFK 15x16
1 x Telemetry interface ALTIS 6 cm
1 x Servo KST MS825 V8.0 35kg 8.4v
1 x Receiver DUPLEX R5L EX 2.4 GHz
2 x Battery EMCOTEC LiIon 3000 7.2v
1 x DPSI magnetic switch actuator (housing)
1 x wing/fuselage connector for 3 pines AWG 20-24
1 x DUPLEX RC Droid Box - DC/DS
2 x PowerFuel RX V2 Fuel Pump
1 x Receptor DUPLEX REX R9 Slim
1 x Avanti S Jet , Field folding model stand (SebArt)
1 x Avanti S Jet, Kerosene+Smoke Tank(SebART)
1 x Jet Afterburner Simulator NF-Jet2YY Set
1 x NF-3XL set
2 x Bidule 55 V3 2460 mm
2 x Bidule 170 ARF 3.48 m
2 x CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9)
2 x PILATUS PC-6 Turbo Porter 33% 5.290 mm
1 x Propeller Pleg CAM Carbon 16x10
1 x Propeller Pleg CAM Carbon 13x11
1 x Propeller Pleg CAM Carbon 12x10
1 x Satellite receiver DUPLEX Rsat 900 NG MHz
1 x Receptor MINIMA 6S HITEC
1 x Avanti S Jet , Exhaust for JetCat P-140 (SebArt)
1 x EWC3 100 cm wing connector
1 x NF-3 RC set
1 x Jet Afterburner Simulator NF-Jet3 YSW
1 x Slider Extenion for CORE
1 x Receiver RSF08SB comatible FUTABA
1 x Receiver RFA05 5Ch compatible FUTABA
1 x CARBON CUB 15cc ARF 2280 mm
2 x Bidule 55 2460 mm Cabina
1 x Bidule 111 3000 mm Canopy
1 x Bidule 111 3000 mm
1 x Propeller Pleg CAM Carbon 12x11
1 x Propeller Pleg CAM Carbon 14x8
1 x ALBATROS L-39 G2 "Camo Tiger" Turbine ready
1 x Propeller Pleg CAM Carbon 15x6
1 x Propeller Pleg CAM Carbon 15x10
1 x Propeller Pleg CAM Carbon 10x8
1 x Propeller Pleg CAM Carbon 10x4
1 x Propeller Pleg CAM Carbon 12.5x7.5
1 x Propeller Pleg CAM Carbon 12x8
1 x GM Propellers Folding propeller Scale 20x13 Carbon 1 pair
1 x Propeller RF CFK 16x8,5 S
1 x Propeller CFK 12.75x13
1 x Propeller CFK 17x13
1 x Propeller CFK 15x7
1 x Propeller CFK 12X6
1 x Propeller CFK 14x10
1 x Propeller CFK 18x17
1 x Propeller RF CFK 10x17
1 x DPSI Micro - RCS
1 x DUPLEX R12 receiver REX Assist
1 x Combo lighting module with covering drop shape
1 x Receptor CORE PBR-26XS 26ch
1 x Heat sink for Optotronix LEDs
1 x DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x Hose clamps 0.16-0.20in, (4 pieces)
1 x wing/fuselage connector for 12 pines AWG 20-24
1 x Heat-conducting adhesive (2x2ml), WLK DK 4
1 x Filter Capacitor JR
1 x DPSI RV Mini 6 Magic
1 x MPX Sub-D Adaptor
1 x OPTOTRONIX Aurora LCU
1 x Receiver DUPLEX REX 3 2.4 GHz
1 x EWC6 40 cm wing connector
1 x Receiver Hitec OPTIMA 9 2.4 GHz AFHSS 9ch
1 x PWC4 wing/fuselage connector for 4 servos
1 x DPSI RV Mini 5 (2008)
1 x DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x DPSI Ampere battery backer
31,645.16EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies