1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Gates hinge
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Micro flex hinge (12 uds)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x Fast'n EZ-CA-Hinge (12 uds)
1 x Long pinned hinge (6 uds)
1 x Flap hinge (6 pcs)
1 x Pin hinge 26x11 mm (10 uds)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x 15 mm reinforced hinge
2 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Large flex hinge (12 uds)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
2 x Nylon hinge 15x0,3 (10 pcs)
1 x 25 mm reinforced hinge
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x 18 mm reinforced hinge
2 x Gates hinge 30x16 mm (2 pcs)
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Medium pin type hinge (12 uds)
1 x Interface Jack Adapter IKARUS
1 x SIMtransmitter 6 Mode 2
1 x RF9 Flight Simulator with Spektrum Controller
1 x Slave-cable USB Easy Sim
1 x Interface Realflight Simulator
1 x EasyFLY Addon
1 x Pilot "Dick" Legends Series (Slimline)
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x 1/12 Pilot "Tom"
1 x 1/12 Pilot "Cougar"
1 x Piloto Jet "Green" 1/6 Scale
2 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x Civilian pilot "Curt" size 9cm (Slimline)
4 x 1/6 Pilot "Tony"
3 x 1/6 Pilot "Buddy"
1 x 1/10 Pilot "Jimmy"
3 x 1/6 Pilot "John"
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Round Rod 1,25x1000 mm
1 x Strip ABS 2.0x8.0x1000 mm
1 x Round Rod 5,0x1000 mm
1 x Round Rod 2,0x1000 mm
1 x ABS Strip 1.5x2.0x1000 mm
1 x Round Rod 3,0x1000 mm
1 x USB Mini Camera endoscope
1 x ABS I Strip 10x5x1000 mm
1 x Round Rod 6,0x1000 mm
1 x ABS Strip 1.5x8.0x1000 mm
1 x Strip 2,0x2,0x330 mm
2 x 800TVL CMOS camera for FPV
2 x ABS Strip 1.5x6.0x1000 mm
1 x ABS Strip 1.0x3.0x1000 mm
1 x ABS Strip 1.0x4.0x1000 mm
2 x Strip 3,5x1,75x330 mm
2 x Strip ABS 2.0x3.0x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x Round Rod 1,5x1000 mm
1 x ABS Strip 1.5x4.0x1000 mm
1 x ABS Strip 1.0x5.0x1000 mm
1 x Strip ABS 2.0x5.0x1000 mm
1 x 
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Miniature brass strap hinge, 1 m
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Small pinned hinge (12 uds)
1 x Monokote BLUE metalizado (1.8x0.65m)
1 x 120x60 mm SLH KOVO wheel
1 x Propeller POWER-PROP 7x7
2 x Pilot "Anthony" (Slimline)
2 x 1/6 Pilot "Garry"
2 x 1/4 Pilot "Heidi"
2 x 1/6 Pilot "Cindy"
2 x Piloto Jet "Red" 1/6 Scale
1 x Pilot "Goose" (Slimline)
1 x Piloto JET 1:3,5
2 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x Simulador RealFlight RF-9.5 S (sin emisora)
2 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x Support pumb/filter Xicoy X45
1 x Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
1 x Tail wheel for 8-12 kg models
1 x Tail wheel for 5-8 kg models
1 x SU 29S 140 carbon landing gear
1 x Round Rod 1,0x1000 mm
1 x Propeller 11x4,7 SlowFlyer
1 x Propeller 9x4,7 SlowFlyer
1 x Reductora IPS 150 DX2BB-DXCS 9,7:1
1 x Propeller 3x2
1 x Propeller Pleg CAM Carbon 15x8
1 x Propeller 9x7 SlowFlyer
2 x Foam wheel Ø 351 mm (2 pcs)
1 x Reductora IPS dual-motor 10,7:1 with spinner
1 x Cooler motor type 150
1 x Retract undercarriage
1 x Cooler motor type 400
2 x Cooler motor type 300
1 x Propeller 8x4 Electric
1 x Lock washer 2.7 mm (20 pcs)
1 x MB-339 Aermachi 84" ARF c/retractil electric
1 x L-39 Albatros 138"/3.5m lenght ARF
1 x Carbon plate 350x150x3.0 mm
1 x F1 Prop Cap Can (Fuel Container Conection)
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x 1/4 Pilot "Mike"
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Support conector MPX (6 pcs)
1 x Servo SAVOX SW-1250 MG digi
1 x L-shaped servo mount
1 x Tapa estado carga XT-60 (6 pcs)
1 x 25 mm carbon servo arm
1 x Servo arms set HS-60/81/85/5082MG/5085mg
1 x Screws set for Hitec MG arms servo
1 x Servo AN-8 HBA
1 x Servo HITEC HS-5585MH
1 x Epoxy 40 min (Hardener). 10Kg
1 x GPS Logger Dymond
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x Pilot "Duke" Legends Series (Slimline)
1 x Servo DITEX EL0510M
1 x SERVO DES 707 BB MG
1 x Gear for MICRO BB
1 x Gear set HITEC HS-645MG/5645MG/5685MH
1 x Servo HITEC HS-85 MG
1 x Servo arm with 6 mm hole to FEMA 9800A
1 x Servo HITEC HS-311
1 x Gear for D 54
1 x Gear for D 200 BX
1 x SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS)
1 x Servo DL3017 Digi 17Kg-0.15s/60º
1 x Servo BMS-4112
1 x Servo SAVOX SA-128S SG
1 x Brazo servo aluminio HITEC HS-125MG/5125MG
1 x Savox Brushless Servo SC-1251 MG
1 x Servo HITEC HS-45 HB
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x Gear set HITEC HS-7950TH
1 x 1,2x1000 mm 2:1 black termoretract tube
1 x 6,4x1000 mm 2:1 black termoretract tube
1 x 76 mm light wheels (2 pcs)
11,047.02EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies