Top » Catalog » Hardware » Servos » Hitec » ROIHS635HB

25.75EUR

Servo HITEC HS-635HB Carbonite
[ROIHS635HB]

The HS-635HB utilizes the revolutionary “Karbonite ™” gear train. Karbonite ™ is four times stronger than our standard nylon gears and even after hundreds of thousands of cycles it does not show any signs of wear. With a powerful motor, and dual ball-bearing mounted output shaft, the HS-635BB offers plenty of torque and speed. If your application requires increased speed and torque, the HS-635BB is the perfect upgrade from a standard size servo.

Specifications
- Motor Type: 3 Pole
- Bearing Type: Dual Ball Bearing
- Speed: 0,18 / 0,15 sec @ 60 deg.
- Torque: 69,43 / 83,32 oz.in (4,8v/6v) 5,0 / 6,0 kg/cm
- Size: 1,59"x0,77"x1,52" 40,60x19,80x38,80 mm
- Weight: 1.76oz 50.00g

temporarily out of stock

Reviews

Customers who bought this product also purchased

Teacher-student connector T12FG/FX-30 temporarily out of stock	Extension silicon 30 cm male (Futaba) temporarily out of stock	Extension silicon 30 cm female (Futaba) temporarily out of stock
Cabel "Y" 30 cm (Futaba) temporarily out of stock	Servo HITEC HS-225 MG temporarily out of stock	Servo HITEC HS-125 MG temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Controlador tren/frenos ER-150 V2
55.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

3 x	Extinguisher CO2 - 2 Kg
1 x	Bungee HLG Premium
1 x	Vasa model Catapult
1 x	Motor DLE 170 M- Paramotors
2 x	Plasti Dip Liquid Tape 429 ml black
1 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Propeller POWER-PROP 13x9 Izda
1 x	Hovercraft sailcloth
1 x	800TVL CMOS camera for FPV
1 x	White silicone 0,25 mm² wire (25 m)
1 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	Ball link M3 (10 pcs, flat ball)
1 x	Strip 2,5x1,25x330 mm
1 x	FUNRAY RR
1 x	LO 100 Scale 1:2 - Modellbau Bruckmann
1 x	Electric spoiler 440 mm (2 pcs)
2 x	VAGABOND 1500 mm ARF V2 (Blue)
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	Spray EC Red 400ml
2 x	Quick hose connector 3-3 mm
1 x	Kavan Car 25% nitro 1l
1 x	Landing gear strap large (4 uds)
1 x	Tren de cola carbono 50-70cc
1 x	Landing gear clamp for Ø 2 mm (4 uds)
1 x	Complete kit CAT 966G II WEDICO-construction-models
1 x	Tailwheel for F3A size
1 x	Nylon threaded block M5 (2 uds)
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	Nitroverdu 500 ml
1 x	Canopy Lock V1 M3 Red (2 pcs)
2 x	Allen wheel collar M3x5
2 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
2 x	Cable grommet 9.5 mm (4 uds)
1 x	Festo 4mm Tubing Holder (10 uds)
1 x	28 mm tailwheel unit
1 x	Tailwheel for 60/120 size
2 x	Festo Adaptor Tygon Large/4mm
1 x	Tail wheel for 5-8 kg models
2 x	Aluminun wheel collar 5 mm Ø (4 uds)
3 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	Air pressure gauge
1 x	Bags wings/rudder ODYSSEY
1 x	F-16 Scale 1:6 Camuflaje Grey (1.630mm)
1 x	FOX ARF 2000 mm Red (Hacker Model)
1 x	Glider Ka 7 Red (2540mm)
1 x	VAGABOND 1500 mm ARF V2 (Red)
1 x	ASPIRE Red ARF 2.000 mm, Set Elevators
1 x	ASPIRE Red ARF 2.000 mm, Front Fuselage
1 x	F4E Phantom Scale 1:7
1 x	Jet Pipe for ASPIRE 2m JMF
1 x	ASPIRE Navy ARF 2.000 mm
1 x	Prelude ARF 2500 mm (TopModel)
1 x	Lightweight aircraft wheel, 50x18.5x3
1 x	Lunak ARF 2000 mm Yellow (Hacker Model)
1 x	Swift ARF 2000 mm Red (Hacker Model)
1 x	PU aircraft tyre, 45x16x3 mm
1 x	Lightweight aircraft wheel, 45x18.5x2
1 x	FX three-position switched channel, long
1 x	FOX MDM-1 3.500 mm ARF White
1 x	Lipo RO-POWER Ultra MAX 2300 mAh 14.8v 35c
1 x	TAKEO 3.6m electric
1 x	Teacher-student connector T12FG/FX-30
2 x	Robbe Modellsport ROOKIE 35 ESC FOR BRUSH MO TORS
1 x	BULLIT Wing 1095 mm
1 x	BOOMERANG II 40/46 ARF 1.55mm
1 x	PC-6 Pilatus Porter Big "Tiger" (PICHLER)
1 x	TRAINER RC Pilot V2 90" w/r ARF
1 x	3 mm Leader (L 100 mm)
1 x	Pipa 3D BULL MØ1 2.600mm
1 x	290 mm 8x4 M4 shaft ship
1 x	Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re
1 x	Nose leg 155 mm with wheels 70 mm
1 x	Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re
1 x	Electric Landing Gear BULL Mo1 2.6 (Elektron Retracts)
1 x	Fuselage BULL MØ1 2.600mm
1 x	290 mm M4/4 mm Prop shaft
1 x	25 mm fenders (10 pcs)
1 x	15x7 tree blades propeller LEFT
2 x	250 mm / 16 mm Airbrakes
1 x	28 mm turnbuckle
1 x	Electric Landing Gear AVANTI XS (Elektron Retracts)
1 x	Actuator Electric 25 mm HIGH TORQUE
1 x	Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x	ER-40eVo Set A [2x ER40 + RB-45]
1 x	ER40eVo set B (20 Kg)
1 x	Actuator Electric 25 mm
1 x	Landing gear retract neumatic (Jet Legend)
3 x	Allen wheel collar M3x3
1 x	Spray Graphit 33
1 x	Plasti Dip Liquid Tape 429 ml orange
3 x	Allen wheel collar M4x4
2 x	Cabin latch Fox MDM1 4m (pair)
1 x	45 mm rods + T patellas set for direction control
1 x	Xplorer2 anemometro
1 x	41x5,5 mm wires output (2 pcs)
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 111
2 x	Aluminun wheel collar 4 mm Ø (4 uds)
2 x	28x5 mm wires output (2 pcs)
1 x	Surprise XII Horizontal Estabilizer (Freudenthaler)
1 x	90 mm rods + T patellas set for direction control
2 x	11 mm Rubber pads (14 pcs)
1 x	M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Tap FESTO 6-6 mm
1 x	XPower XC4226/12 LS
1 x	Carbon plate 350x150x3.0 mm
1 x	Starter EM Gear Power 80
1 x	Conector MR-60 (pareja)
1 x	Motor OS 81 FS 4T
1 x	Xplorer3 anemometro
1 x	Xplorer4 anemometro
1 x	Xplorer1 anemometro
2 x	38x4,5 mm wires output (2 pcs)
1 x	Wheel collar 2 mm Ø (4 uds)
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Clip mini fixing for wing (2 pcs)
1 x	Tip wing protector 28x10x12 (2 pcs)
1 x	80 mm rods set for direction control
1 x	Pushrod octagone 4/3 with coupler M3
1 x	Cable tie mounts 4.3 (4 uds)
2 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	100 mm rods set for direction control
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Tip wing protector 40x14 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
1 x	Clip fixing for wing (2 pcs)
1 x	Wheel collar 3 mm Ø (4 uds)
1 x	Pushrod greyline 3/2 with coupler M2
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	Pushrod greyline 3/2 with coupler M3 L: 1000 mm
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	140 mm rods + T patellas set for direction control
1 x	Pushrod octagone 3/2 with coupler M2
1 x	Pushrod greyline 3/2 with coupler M2 L: 1000 mm
1 x	Allen wheel collar M4x6
1 x	Canopy Latch
1 x	Pushrod octagone 3/2
1 x	Tip wing protector 30x10 (2 pcs)
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs)
1 x	Wheel cover holder Ø 4 mm (2 uds)
1 x	Z-shaped servo mount
1 x	T-Hose connector 3-3-3 mm
1 x	Y-Hose connector 4mm
1 x	CYCLONE XT 6.2m ARF

36,331.18EUR