Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

VSpeak ECU converter KingTech
79.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Small pinned hinge (12 uds)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	25 mm reinforced hinge
3 x	Gates hinge
2 x	Gates hinge black 30x16 mm (2 pcs)
2 x	Micro flex hinge (12 uds)
1 x	Large flex hinge (12 uds)
3 x	Gates hinge aluminium (1 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
3 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
2 x	Pin type hinge Al 4,5x70 mm (2 pcs)
2 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Long pinned hinge (6 uds)
3 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Flap hinge (6 pcs)
1 x	Red smoke canister 65 g
1 x	CC 05
1 x	30 cm BEC cable (female)
1 x	30 cm BEC cable (male)
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	AX-60 starters (5 pcs)
1 x	CC 03
1 x	Yellow smoke canister 65 g
2 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	White smoke bombs AX-9 (10 pcs)
1 x	"M" set
1 x	Remote electric ignition system
2 x	Yellow smoke canister 140 g
1 x	3l Smoke oil
1 x	CC 02
1 x	Initior Transmitter FTX2 Wireless
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	White smoke canister 65 g
1 x	White smoke canister 140 g
2 x	CM-3
1 x	Blue smoke canister 100 g
1 x	White smoke bombs AX-60 (5 pcs)
1 x	B4-0 rocket charges (6 pcs)
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	Dean "T" - Futaba Adapter
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	MPX-Dean "T" Adapter
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
2 x	Black smoke bombs AX-60 (5 pcs)
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
2 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
3 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
2 x	Threaded coupler M3 (10 uds)
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Couple M4 for wire (10 pcs)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
2 x	Z type of cable coupler Ø 1 (2 uds)
1 x	Ball Link ALU M3 - RH (1 pcs)
2 x	Ball Link M2 with Ball and Hardware, 10 pcs
2 x	Ferrita con funda
2 x	Ferrita 27x14x7 mm
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	10m servo "Premium" wire (white/red/blue)
1 x	Surface Indicator Gauge Small
1 x	ABS tube 4.0x2.0x1000 mm
1 x	Extra Hard Titanium Herxagon Screwdrivers
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Glases Nimbus "Black"
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	20 g tin paste
1 x	Support conector MPX (6 pcs)
1 x	Support FUEL DOT V3
1 x	Male Prolonger TP 4/5S
1 x	Extension 2/3 lipos JST/C
1 x	TP/TopFuel - XH 2/3S Adapter
2 x	Battery RX JETI LiIon RB 2600 7.2v
2 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	4 LiPo XH>EH adapter
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	2 LiPo XH>EH adapter
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Connector CAN 15
1 x	Indoor hinge with servo arm integraded
1 x	Aluminium battery holder red
1 x	DPS Switch JR/JR
1 x	DPSI magnetic switch actuator (housing)
1 x	PSC 6
1 x	Connector Sub-D 2+5 Male
1 x	Interruptor RX/Batterie
3 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Small pinned hinge (6 uds)
1 x	Universal batery Tester
1 x	Nylon hinge 20x15x0,3 (10 pcs)
2 x	DPSI Ampere battery backer
1 x	PowerPack 2.5X2 PRO
1 x	Connector Sub-D 2+5 Female
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
2 x	LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	18 mm reinforced hinge
1 x	Yellow smoke canister 100 g
2 x	Wing tips support for AX-18/AX-60 (2 pcs)
2 x	Red smoke canister 100 g
2 x	Blue smoke canister 140 g
1 x	SPARK Switch 5.9v
1 x	AX-60 starters (5 pcs)
2 x	Opto Gas Engine Kill Switch
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Green smoke canister 100 g
2 x	Pulley brass 2,5/1 (2 pcs)
3 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Threaded coupler M2,5 (10 pcs)
1 x	Cable coupler M3 (10 uds)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Turnbuckle M2x29/43 (2pcs)
1 x	Pulley brass 8/2 (2 pcs)
2 x	Pull-Pull complet set with CF rudder double servo arm
1 x	Round Rod 1.0x3.5 cm
1 x	wire tensioner (silver)
2 x	BRASS CONTROL HORN M3x16 mm 2pcs
1 x	Pulley brass 5/1,5 (2 pcs)
1 x	Pulley brass 4/1,5 (2 pcs)
1 x	Pulley brass 16/2 (2 pcs)
2 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Wire easy tensioner (red)
1 x	Kwik link AL M4 con Clip (2 pcs)
2 x	wire tensioner (blue)
2 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Turnbuckle M2,5x32/48 (2pcs)
2 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Long pinned hinge (12 uds)
1 x	Rocket cardboard tube 25mm x 24mm x 230mm
1 x	Ferrita 14x8x5.5 mm
1 x	Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
1 x	resin-hardener package L-385 with hardener H-385
1 x	Thixotropic agent TM 100, tin/ 75 g (approx. 1 l)
1 x	Mould Resin P 10 kg
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x	Avia spare fouselage CF reinforced (Top Model)
2 x	PWC4 wing/fuselage connector for 4 servos
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x	SPS Remote switch actuator
1 x	BULLIT Wing 840 mm
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	Short Switch On/Off micro
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Opto Gas Engine Kill Switch
1 x	SBEC Jeti
1 x	Spring clamp for tube Ø29 mm ext 1pc
1 x	Challenger ARF (Top Model)
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Bidule 170 ARF 3.48 m
1 x	ARTIST 1.560 mm
1 x	Electric spoiler 440 mm (2 pcs)
1 x	White smoke canister 100 g
1 x	Battery Protection Circuit Board 22.2v 6s
1 x	DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x	PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x	DPSI RV Mini 6 (2008)
1 x	DPSI Micro - RCS
1 x	DPSI RV Mini 6 Magic
1 x	EWC3 100 cm wing connector
1 x	Battery RX JETI LiIon RB 5200 7.2v
1 x	Battery EMCOTEC LiIon 3000 7.2v
1 x	Robart Door Hinge (Pk2)
1 x	DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x	DPSI RV Mini 5 Magic
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	Parachute expulsion foam
1 x	MPX Sub-D Adaptor
1 x	63 mm INO spinner (carbon imitation)
2 x	wire tensioner (black)
2 x	Wire easy tensioner (silver)
1 x	Central support Speed 600
1 x	Motor mount for 1 m models
1 x	Shirt Hispano Aviación
1 x	XPower XC5030/14 LS
1 x	Ventral support for AX-18/AX-60
1 x	15 mm reinforced hinge
1 x	TrainerCord (master-learner)
1 x	Spinner INO 51 mm Chrome (Imitacion metal)
1 x	Spinner INOVA 102 mm Black
1 x	Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs)
1 x	Spinner Alumin. fixed propeller 50 mm / 3,2 mm
1 x	Pulley brass 14/2 (2 pcs)
1 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x	Spinner Alumin. fixed propeller 45 mm / 4,0 mm
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x	70 mm INO spinner (carbon imitation)
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	89 mm INO spinner (carbon imitation)
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Porta Kwik link M4 3 mm (2 pcs)
1 x	4 mm M3 red control terminal (4 pcs)
1 x	Frontal support Speed 600
1 x	Motor Mount for Multiplex FunJet
1 x	Bearings for motor HACKER C50
1 x	Ø 28 mm fiberglass motor-holder for electric motors
1 x	Motor mount for 1200 mm models
1 x	Battery bed V2_S (black)
1 x	DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
1 x	MEKP Harderner 100 g
1 x	XPower XC3522/5 LS
1 x	XPower XC4226/12 LS
1 x	resin-hardener L-385 H-385 (1250 g)
1 x	Propeller KAVAN 32x12 2-Bl
1 x	30x14 prop Super Silence
1 x	Propeller MENZ-S 21x10
1 x	Propeller CFK 14x10
1 x	Propeller CFK 18,5x12
1 x	Propeller RF CFK 10x17
1 x	Propeller APC 11x6 Glow/Gas
1 x	Propeller MENZ-S 19x8 3-Blades
1 x	Propeller MENZ-S 18x6
1 x	FALCON 24X9 CARBON PROPELLER (GAS)
1 x	FALCON 24X10 CARBON PROPELLER (GAS)
1 x
1 x	Propeller MENZ-S 16x8
1 x	Propeller MENZ-S 21x8 3-Blades
1 x	Propeller CFK 15x15
1 x	Propeller CFK 16x13
1 x	Propeller CFK 12.75x13
1 x	Propeller CFK 17x18

10,529.55EUR