Top » Catalog » Hardware » Power supply system/Data Recordi » Jeti » JETCB3202+

534.01EUR

DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
[JETCB3202+]

JETI DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements.The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.

Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.

Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied R/C switch.

Recommended receivers
Two compatible RSat2 receivers are included. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

ProgBox PRO LCD Hobbywing
44.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Foam wheel Ø 351 mm (2 pcs)
3 x	60x25 mm tail wheel "type F3A"
1 x	73x24 mm hard foam KOVO wheel (2 pcs)
1 x	76x23 Ø3.5 mm aluminium core wheel
2 x	63x12 mm foam special light KOVO wheel with radius (2 pcs)
1 x	73x24 mm hard foam KOVO wheel with bearing (2 pcs)
1 x	70x23 Ø3.5 mm aluminium core wheel
3 x	20 mm tail wheel for 0,5-1 Kg models
3 x	100x50 mm SLH KOVO wheel
1 x	115x29 mm (4.50") Type jets aluminium core wheel
2 x	Foam wheel Ø 38 mm (2 pcs)
1 x	89x32 mm (3.5") axle Ø5 mm aluminium core wheel
1 x	120x60 mm SLH KOVO wheel
2 x	69x25 mm (2.75") axle Ø4 mm aluminium core wheel
3 x	35x14 mm hard foam KOVO wheel (2 pcs)
1 x	90x45 mm hard foam KOVO wheel
1 x	63x20 mm (2.5") axle Ø5 Type jets mm aluminium core wheel
3 x	43x14 mm hard foam KOVO wheel (2 pcs)
1 x	64x20 mm (2.5") Type jets aluminium core wheel
1 x	80x40 mm hard foam KOVO wheel
2 x	150 mm inflatable superlight deluxe wheel (2 pcs)
1 x	4" - 102 x 45 mm Ø5 mm aluminium core wheel
1 x	45x9 mm foam special light KOVO wheel with radius (2 pcs)
2 x	102x26 Ø6.0 mm aluminium core wheel
1 x	110x55 mm SLH KOVO wheel
1 x	127x43 Ø6.0 mm aluminium core wheel
3 x	32x9 mm foam standar KOVO wheel (2 pcs)
1 x	44.5x17 mm (1.75") Type jets aluminium core wheel
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 7.0 mm x 1000 mm
2 x	Wheel 38 mm V2
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	45x19 mm hard foam KOVO wheel (2 pcs)
1 x	Super Light Wheels(Sponge Tyre) Ø 55mm x 19mm (2pcs) axis Ø 3.5m
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Brass rod Ø 0.5 mm x 1000 mm
2 x	Super Light Wheels (Sponge Tyre) Ø 60mm x 19 mm (2pcs) axis Ø 3.
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
3 x	Rubber wheel Ø 70mm x 27mm (2pcs) axis Ø 3.6mm
2 x	Aluminium rod Ø 4.0 mm x 3000 mm
2 x	Plastic wheels 28 mm (2 pcs)
1 x	Rubber wheel Ø 45mm x 16mm (2pcs) axis Ø 2.1m
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Super Light Wheels(Sponge Tyre) Ø 50mm x 19mm (2pcs) axis Ø 3.5m
2 x	Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m
1 x	Wheel 22 mm
1 x	76 mm light wheels (2 pcs)
1 x	Super light ∅45x9 mm axi ∅3 mm metalic core wheel
1 x	Superlight deluxe wheel 45 mm (2 pcs)
1 x	Straightened threaded rod M2-1m
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Green smoke canister 140 g
1 x	Parachutist
1 x	Ventral support for AX-18/AX-60
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Initior Transmitter FTX2 Wireless
1 x	CM-3
3 x	Red smoke canister 65 g
2 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Cabel charger transmitter GRAUPNER
2 x	White smoke bombs AX-9 (10 pcs)
1 x	CC 01
1 x	USB HLS prog. interface
3 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	Smoke set "S"
2 x	Smoke set "Glider"
2 x	3 copper lacquer wire Ø0,2 mm (1 m)
2 x	Red smoke bombs AX-60 (5 pcs)
1 x	Parachute expulsion foam
1 x	3 LiPo XH>EH adapter
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	30 cm BEC cable (female)
2 x	CC 03
2 x	Circlick securite
1 x	White smoke bombs AX-60 (5 pcs)
1 x	White smoke canister 65 g
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	AX-60 starters (5 pcs)
1 x	Mixers smoke bombs AX-60 (5 pcs)
2 x	Mahogany wood slat 1.5x1.5x1000 mm
2 x	Pine wood slat 10x10x1000 mm
2 x	Beech dowels 10 mm x 1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
2 x	BALSA triangular 15x15x1000 mm
2 x	Pine wood slat 2.0x2.0x1000 mm
3 x	OBECHI sheet 2.0x3.0x1000 mm
2 x	Walnut wood slat 3.0x3.0x1000 mm
2 x	BALSA triangular 8x8x1000 mm
2 x	Pine wood slat 3.0x7.0x1000 mm
2 x	BALSA triangular 6x6x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
2 x	Trailing edge BALSA 35x8x1000 mm
2 x	Beech dowels 4.0 x 1000 mm
2 x	BALSA trip 8.0x8.0x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
2 x	Pine wood slat 1.5x3.0x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
2 x	BALSA trip 5.0x5.0x1000 mm
2 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Large flex hinge (12 uds)
1 x	Small pinned hinge (12 uds)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Ferrita 27x14x7 mm
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Fast'n EZ-CA-Hinge (12 uds)
2 x	Ferrita 14x8x5.5 mm
1 x	Micro flex hinge (12 uds)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	18 mm reinforced hinge
1 x	Parachute PV6 for F3J
1 x	Set cintas unión paracaídas 145 cm
1 x	Opale Rucksack
1 x	Trike XL motor set (motor+esc+prop)
1 x	Windsock Ozone L - 700 mm
1 x	LUCAS pilot ARTF
1 x	Para-RC "RC-Evo-Cross" Rescue
1 x	Para-RC Trike "RC-Bullix"
1 x	Paramotor Trike XL
1 x	Parachute BACKUP X100
1 x	Paramotor BackPack XXS 2
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Ball link M3 (10 pcs)
1 x	Profile ABS Square 2 x 1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
2 x	Plastic wheels 30 mm (2 pcs)
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Support Pitot JETI
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	76x24 mm (3.0") Type jets aluminium core wheel
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	2.5 inch aluminium core wheel (1 pcs)
2 x	Green smoke canister 65 g
1 x	101x28 mm (4.0") Type jets aluminium core wheel
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	Micro Switch button
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS
1 x	Connector Sub-D 2+5 Female
1 x	White smoke canister 140 g
1 x	Wheel 28 mm
1 x	CC 02
1 x	4 LiPo XH>EH adapter
1 x	White smoke bombs AX-3 (10 pcs)
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	Plastic wheels 36 mm (2 pcs)
1 x	SPARK Switch 7.4v
1 x	Telemetry interface ALTIS to Futaba
1 x	Extension 2/3 lipos JST/C
1 x	Interruptor RX/Batterie
2 x	Rubber wheel Ø 58mm x 21mm (2pcs) axis Ø 2.6mm
1 x	Wheel FEMA 127 mm / 6 mm
1 x	Electric rocket starters (6 pcs)
1 x	Wheels 270mm (2 pcs)
1 x	Lightweight aircraft wheel, 50x18.5x3
3 x	Blue smoke canister 140 g
1 x	Female connector JST SH 1.0mm with 10 cm wire
1 x	DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS
1 x	CC 05
1 x	PSC 5
1 x	Wheel Scale 1/3 Vintage 240 mm / 9.33" (1 par)
1 x	PU aircraft tyre, 45x16x3 mm
1 x	NoNa BB wheel Ø130x40mm in pair
1 x	Rubber wheel Ø 50mm x 18mm (2pcs) axis Ø 2.6mm
1 x	Wheel FEMA 165 mm / 8 mm
1 x	DPSI magnetic switch actuator (housing)
1 x	A/C economy plywood 600x300x6+.0 mm
1 x	Balsa panel 1.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x8.0 mm
1 x	Balsa panel 6.0x100x1000 mm
1 x	Extension 6 lipos XH > EH
1 x	Rubber wheel Ø 50mm x 24mm (2pcs) axis Ø 3.1m
1 x	MAX BEC 2D plus EX
1 x	SBEC 40
1 x	Red smoke canister 100 g
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Hot Glue Stick GREEN
1 x	MPS Gas-Cap-Powerswitch
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Lite Plywood panel 600x300x2.0 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
2 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Lightweight aircraft wheel, 55x18.5x3
1 x	Wheel 18 mm
1 x	Emcotec SPS Magnetic Switch Actuator
1 x	T-Hose connector 6-6-6 mm
1 x	Landing gear strap medium (4 uds)
1 x	Tap FESTO 6-6 mm
1 x	PRO-HV Dual Action Valve
1 x	ROBART POINT HINGE 4,7mm (5 pcs)
1 x	Fiberglass landing gear for 140-160
1 x	CORTEX
1 x	Fail Safe air retract
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Y-Hose connector 3-3-3 mm
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)

7,571.91EUR