Top » Catalog » Hardware » ABS/GFK/CFK plate » RG61903501503

85.00EUR

Panel Honeycom carbon 350x150x3.5mm
[RG61903501503]


Panel Honeycom carbon 350x150x3.5mm
Sandwich sheet with two outer layers of carbon fibre fabric (twill) and one filling layer Aramid Honeycomb 32 kg/m³.
Outer layers of carbon fibre:
CFK-Prepreg: Carbon fibre fabric 245 g/m² (twill), 3k (200 tex)
Resin system: Epoxy
Prepreg weight: 445 g/m²
Technical Data Prepreg:
Flexural strength (MPa): 1050 (0°), 990 (90°)
Tensile modulus (GPa): 62 (0°), 60 (90° )
Tensile strength (MPa): 1100 (0°), 1030 (90°)
Interlaminar shear strength (MPa):68 (0°), 70 (90°)
Tensile modulus (GPa): 70 (0°), 65 (90°)
Elongation at break (%): 1.6 - 1.7
Density (g/m³): 1.56
CFRP sheets are generally not UV-resistant.
Filling layer Aramid Honeycomb 32 kg/m³:
High impact, vibration, and fatigue strength
Extremely high compressive strength
Very good chemical resistance
Light supporting material produced from aramid paper for fibre compound parts in sandwich construction. With reference to weight, honeycombs have the greatest resistance to pressure amongst all support materials and extremely good resistance to chemicals, impact, vibration and fatigue. They are also very flexible and thus also suitable for components with spherical roundings. Mould pressure is used to bond honeycombs. A vacuum bag is normally used.
Technical data Aramid Honeycomb:
Density: 32 kg/m³
Thickness: 3.0 mm
Cell size: 3.2 mm
Production tolerances: Length: ≥ 0 mm, width: ≥ -5 mm, thickness: 2-50 mm: ±0.2 mm; 50.01-100 mm: ±0.5 mm; > 100.01 mm: ± 3 mm, Dichte: ± 10 %
Compressive strength (bare): 0.64 MPa
Shear strength: Length: 0.68 MPa, width: 0.41 MPa
Shear modulus: Length: 36 MPa, width: 20 MPa
Dimensions Carbon fibre/Aramid Honeycomb-Sandwich sheet:
Total thickness: 3.5 mm
Length x width: 1100 x 700 mm, 550 x 350 mm, 350 x 150 mm


under request
under request

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
What's New?
Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
28.00EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
4 x Servo NARO Max Std
2 x Hovercraft sailcloth
1 x AX-60 starters (5 pcs)
1 x HOPPER tank INTAIRCO iTrap 30 PRO 3x FESTO 4mm
2 x Circlick securite
2 x Cable S.BUS 3 salidas 300 mm
1 x Servo MKS HV747
2 x Cable S.BUS 3 salidas 100 mm
2 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Digital Air Speed Sensor And Pitot Tube Set
3 x VBar NEO
1 x Extension PVC 150 cm (Graupner)
1 x 3 LiPo XH>EH adapter
2 x Motor A2212/13T
2 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Extension silicon 10 cm (Graupner)
2 x 3 copper lacquer wire Ø0,2 mm (1 m)
2 x 2 LiPo XH>EH adapter
1 x 4 LiPo XH>EH adapter
2 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x Extension silicon 10 cm (Futaba)
1 x UBEC 6A KAVAN
1 x 30 cm BEC cable (male)
1 x BEC 3A FOXY
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
3 x Xplorer4 anemometro
2 x Xplorer3 anemometro
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Xplorer2 anemometro
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x 30 cm BEC cable (female)
1 x B4-0 rocket charges (6 pcs)
1 x Blue smoke canister 100 g
2 x ARAMID honeycomb 1300x2600x2 mm
3 x ABS tube 5.0x4.0x156 mm
2 x Electric rocket starters (6 pcs)
1 x ABS tube 16.0x14.0x1000 mm
2 x ABS tube 4.0x2.0x1000 mm
1 x ABS tube 3.0x1.0x1000 mm
2 x Vest clothes Hispano Aviación
1 x Angle of incidence meter
1 x Truck-trailer for gliders 720 x 239 mm
1 x Angle measurer
1 x PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x HOPPER tank INTAIRCO iTrap 30 PRO 3x FESTO 4mm 90º
1 x Soporte carbono MR30 (2 pcs)
1 x FALCON 33X11W CARBON PROPELLER (GAS)
1 x F8F Bearcat #201 2.460 mm
1 x Fuel tank 500ml (17oz)
3 x Paramotor BackPack XXS 2
2 x Parachute P4
2 x Para-RC "RC-Evo-Cross" Rescue
2 x Trike XL motor set (motor+esc+prop)
1 x Marker ties (20 pcs)
2 x Parachute BACKUP X100
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x Yellow smoke canister 65 g
1 x Windsock Ozone L -1200 mm
1 x 20x1000 mm Ring Strap Back To Back
1 x ABS angle 10,0x10,0x1000 mm
2 x ABS rectangular profile 10x5.0x1000 mm
2 x Straightened rod Ø 1.0 mm x 1000 mm
3 x BALSA leading edge 8x10x1000 mm
1 x Big-Malibu XL Roof box with surfboard rack GREY
2 x Conector FUTABA Servo male (10 pcs)
2 x 1/12 Pilot "Fighter"
1 x T-Hose connector 3-3-3 mm
1 x T- Fittings red color (2pcs)
1 x 1/6 Pilot "Garry"
1 x 1/12 Pilot "Tom"
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x SERVO DES 806 Pignons
2 x Adjustable launching hook
2 x Ball link M2 (10 pcs)
1 x Y-Hose connector 4-4-4mm
2 x Vasa model Catapult
1 x Quick hose connector 4-4 mm
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x L-Connector 4.0 mm x 1000 mm
1 x PPS-4D Propeller
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Flat Connector 4.0 mm x 1000 mm
1 x Tirpiz Battleship 1:200
2 x BALSA trip 2.0x10.0x1000 mm
2 x Para-RC Trike "RC-Bullix"
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
2 x Conector FUTABA Servo female (10 pcs)
1 x 1/12 Pilot "Cougar"
2 x USB Mini Camera endoscope
1 x Extinguisher CO2 - 2 Kg
1 x 1/4 Pilot "Mike"
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Fixed launching hook
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x 1/6 Pilot "Tony"
2 x BALSA trip 5.0x5.0x1000 mm
1 x Blade holder metal LAMA
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Soporte servo KST X10 mini / DS135MG
1 x Quick hose connector 6-4 mm
1 x Mini VISION "spread tow" CFK
1 x Conector JAPAN G2 Set 5 pares
1 x Servo KST DS125MG servo ala 10mm 28g 7Kg
1 x BALSA trip 6.0x6.0x1000 mm
2 x ABS "T" angle 6.0x6.0x1000 mm
1 x 9x4.7 * 22x12 carbon propeller
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x JM electric Pump
1 x T-Hose connector 4-4-4mm
1 x 800TVL CMOS camera for FPV
2 x Conector BEC female (10 pcs)
1 x SERVO DES 806 Pignons
1 x Parachute PV6 for F3J
1 x Silent-blocks DLE 170M
2 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
2 x 1/12 Pilot "Langley"
1 x EDGE 540 A 48" (1220 mm) Gris (Skywing)
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Horn 13,5x16 mm (2 pcs)
1 x IMPULSE 2 F3F
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Towing hook
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x Starter EM Gear Power 250
1 x U Profile ABS 1,0x2,0x1000 mm
1 x T-shape holder metal LAMA
2 x Joint with bearing M3 22x5,5
1 x Secraft Fuel system v2, red color
1 x U Profile ABS 5,0x10,0x1000 mm
1 x Conector Servo female 4 pines
1 x Tester LiPo/LiIon/LiMn/LiFe
1 x Glases Flitemaster
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x Electric Fuel Pump 12V
1 x P-51D 89", Electric retract Landing gear
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
2 x Beech dowels 10 mm x 1000 mm
2 x Conector BEC male (10 pcs)
1 x 1/10 Pilot "Jack"
1 x Glases Innovation Plus
1 x IKARUS plane
1 x 28x5 mm wires output (2 pcs)
1 x F4U CORSAIR 93", Electric retract Landing gear
1 x SCHARNHORST Battleship 1:200
1 x Xplorer1 anemometro
1 x Towing hook
1 x 30 cm DEANS female connector
1 x Banna gold connector 2,5 mm (M/F)
1 x 45 mm rods + T patellas set for direction control
3 x Strip 1,5x1,5x330 mm
1 x Joint with bearing M2,5 22x5,5
1 x U Profile ABS 3,0x6,0x1000 mm
1 x Oracover White 2 m
1 x Aero-Master (Aero-naut)
1 x Interface Realflight Simulator
2 x Tape GFK 50 mm
1 x Fuel Fittings-Gold
1 x Cierva C30 Body Spain
2 x Paramotor BackPack XXS (without accessories)
2 x 1/10 Pilot "Jimmy"
1 x Extension Arm for Carburetor (red)
1 x Oracover Yellow CADMIO 10 m
1 x Trailing edge BALSA 35x8x1000 mm
1 x Support 45% Hopper JetsMunt
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x 30 cm MULTIPLEX female connector
1 x Towing hook <3m
1 x Walbro carburetor for MVVS 26/30/35/40 cc
1 x Connectors banna oro 0,8 mm (M/F)
1 x U Profile ABS 8,0x4,0x1000 mm
1 x U Profile ABS 2,0x4,0x1000 mm
1 x EDGE 540S 50E blue/red (SebArt)
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Sukhoi 29S 2,2 m V2 CLASSIC BLUE (SebART)
2 x 10 mm Quick clamp_L (6 pcs)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Aramid 50 daN 50 m
1 x Aluminium sheet 500x250x0,5mm
2 x ABS Strip 1.0x3.0x1000 mm
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
2 x Brass rod Ø 1.0 mm x 1000 mm
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x ABS rectangular profile 12x6.0x1000 mm
2 x A/C quality beech plywood 600x300x0.8 mm
1 x A/C quality beech plywood 600x300x5.0 mm
1 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x A/C quality beech plywood 1520x750x4.0 mm
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
2 x Aluminium wide washer M4 Black (4 pcs)
1 x Monokote PLATINO metalizado (1.8x0.65m)
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Starter Sullivan-STAR 601
1 x Strip 2,0x2,0x330 mm
1 x ABS Strip 1.5x6.0x1000 mm
2 x ABS Strip 1.5x4.0x1000 mm
2 x ABS Strip 1.0x4.0x1000 mm
2 x ABS Strip 1.5x3.0x1000 mm
1 x ABS Strip 1.5x8.0x1000 mm
1 x ABS Strip 1.5x2.0x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
2 x ABS Strip 1.0x5.0x1000 mm
1 x 
1 x Strip ABS 2.0x10.0x1000 mm
1 x ABS I Strip 10x5x1000 mm
1 x Strip ABS 2.0x8.0x1000 mm
2 x Strip ABS 2.0x5.0x1000 mm
1 x Strip ABS 2.0x3.0x1000 mm
1 x Hobbylite Filler, Balsa colour
1 x Wing connector 8pin with pin strip, plug & socket
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
2 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x MPX Sub-D Adaptor
2 x DYNAMOMETER S-1580
1 x Brass control horn M2 long for wire (10pcs)
1 x 80 mm rods set for direction control
1 x Carbon fiber flat 1000x3.0x0.13 mm
2 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x Windsock Ozone L - 700 mm
2 x Black silicone 1,0 qmm wire (50 m)
1 x 100 mm rods + T patellas set for direction control
1 x Tube Pitot to PIXHAWK
1 x Shirt Hispano Aviación
1 x APM2.6 Power module with 5.3V DC BEC
1 x Jeti Black cap
1 x White smoke canister 65 g
1 x Red smoke canister 100 g
1 x White smoke canister 100 g
1 x Spray adhesive AEROFIX 2
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x "S" set for boats
1 x L-Connector 1.0 mm x 1000 mm
1 x Extension silicon 30 cm female (Futaba)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Profile ABS half cane 6.0x1000 mm
1 x Blue smoke canister 140 g
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Cable tie mounts 4.3 (4 uds)
1 x Avanti S 1.8m Jet White/Blue + Landing gear
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x L-Connector 1.5 mm x 1000 mm
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x 5 line servos wire black (1 m)
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x Motor OS 3820-1200 electric
1 x Avanti S 1.8m Jet White/Blue
1 x Premium servo extension 50cm
1 x 11 mm Rubber pads (14 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x Clippe Wing Cub 3050 mm Blue 85cc
1 x Brass control horn M2 short for wire (2 pcs)
2 x M3 Maxi ball link (2 uds)
2 x 6 mm red aluminium threaded horn with patella
2 x ABS tube 12.0x10.0x1000 mm
2 x ABS angle 3,0x3,0x1000 mm
1 x Round Rod 6,0x1000 mm
1 x F-22 Raptor (RBC Kits)
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Green silicone 0,25 mm² wire (25 m)
1 x Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Blue silicone 0,5 qmm wire (50 m)
1 x 6 mm ball link M3 (10 pcs)
1 x Horn with ball 55x40
1 x M2 5Diam black ball link V2 (2 pcs)
1 x Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x SE Ring 200 mm (2 pcs)
1 x Oracover Azul Cielo 2 m
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Protective Cover for wires Ø 3 mm 1000 mm
1 x 90 mm rods + T patellas set for direction control
1 x Pilot "Goose" (Slimline)
1 x ABS I Strip 20x10x1000 mm
1 x Glases Nimbus
1 x Pilot "Adolf" Legends Series (Slimline)
1 x ABS tube 5.0x3.0x1000 mm
1 x Balsa panel 6.0x100x1000 mm
1 x Softshell Hispano Aviación
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x BALSA triangular 6x6x1000 mm
1 x 4,8x1000 mm 2:1 blue termoretract tube
1 x PPM Encoder Module
1 x Green smoke canister 100 g
1 x SE Ring 300 mm (2 pcs)
1 x Short ball link M1.6 (6 uds)
1 x ABS tube 10.0x8.0x1000 mm
1 x Cockpit aluminium closing
1 x White smoke bombs AX-18 (5 pcs)
1 x Lipo KAVAN 3300 mAh 7.4v 40/80C
1 x 165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x Para-RC Mix
1 x Piloto Jet "Green" 1/6 Scale
1 x F-35C (RBC Kits)
1 x Cabel "Y" 30 cm (graupner)
1 x Freewing F-14 Tomcat Twin 80mm EDF PNP (Deluxe Edition)
1 x M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Balsa panel 8.0x100x1000 mm
1 x Profile ABS Square 1 x 1000 mm
1 x Extension silicon 100 cm (Graupner)
1 x 2,4x1000 mm 2:1 black termoretract tube
1 x Cable grommet 9.5 mm (4 uds)
1 x Profile ABS Square 4 x 1000 mm
1 x Cable control set
1 x Beech dowels 4.0 x 1000 mm
1 x Ball link M3 (10 pcs)
1 x Oracover Azul 2 m
1 x Glases Ace
1 x Bag connector 2 mm
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Blind nut M5 (4 pcs)
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Rafale C (Aero-naut)
1 x Monokote BLUE metalizado (1.8x0.65m)
1 x Prolongador S-Bus JR/JR 10cm
1 x Connectors banna gold 5,5 mm (M/F)
1 x ABS tube 20.0x18.0x1000 mm
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Ferrita 14x8x5.5 mm
1 x Cable grommet Ø 5 mm (4 uds)
1 x 41x5,5 mm wires output (2 pcs)
1 x Blind nut M5 (10 pcs)
1 x Ferrita 27x14x7 mm
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x Stickers-digit for marking
1 x Parachutist
1 x BALSA trip 2.0x2.0x1000 mm
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x 2 mm female connector (2 pcs) with safety connector
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x MAX pilot ARTF
1 x Joint with bearing M2 22x5,5
1 x Long ball link M2 (6 uds)
1 x Black smoke bombs AX-60 (5 pcs)
1 x PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x Horn 20x28,5 mm (2 pcs)
1 x Green smoke canister 65 g
1 x 3,2x1000 mm 2:1 black termoretract tube
1 x PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x Profile ABS half cane 7.0x1000 mm
1 x Pilot JAN 1/4 Saiplanes
1 x Small Crow DLE-170M
1 x "M" set
1 x Futaba Female 40 cm extension
1 x Brass control horn M2 large for wire (2pcs)
1 x Brass control horn M4 short for wire (4 pcs)
1 x BALSA trip 3.0x3.0x1000 mm
1 x SE Ring 360 mm (2 pcs)
1 x Big Crow DLE-170M
1 x Conector XT-30 (hembra)
1 x PIX Hawk with accesories
1 x Motor DLE 200cc Std
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x Extra-long adjustable aluminium control horn 2,8x34
1 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x 165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x Connectors banna oro 3 mm (M/F)
1 x Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x A/C quality beech plywood 600x300x1.5 mm
1 x Tape GFK 38 mm
1 x A/C quality beech plywood 600x300x0.6 mm
1 x 100 mm rods set for direction control
1 x Control horn long w/ball
1 x Mini Avanti S 1.4m white/red
1 x Screwdriver for Hexagon 1,5mm
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x M3/5 Diam metal short ball link V3 (2 pcs)
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x Mini AVANTI S EDF 80MM RTF
1 x Screwdriver for Torx® TX8
1 x Aluminium wide washer M4 Red (4 pcs)
1 x Mini AVANTI S EDF 80MM RTF Combo Lipos 5000-6s (SebART)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x 6 mm Quick clamp_S (10 pcs)
1 x ABS angle 1.5x1.5x1000 mm
1 x Profile ABS Square 3 x 1000 mm
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Servo mounting frame SV-1260MG
1 x F-20 Tigershark (RBC Kits)
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Hawker Hunter (RBC Kits)
1 x Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x Pilot "Duke" Legends Series (Slimline)
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x LUCAS pilot ARTF
1 x ABS tube 3.0x2.0x1000 mm
1 x Horn 16,5x20 mm (2 pcs)
1 x Strip 2,5x1,25x330 mm
1 x Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x 6,4x1000 mm 2:1 red termoretract tube
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x SE Ring HACKER 300 mm (2 pcs)
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x Profile ABS half cane 4x2.5x1000 mm
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Extension silicon 75 cm (Graupner)
1 x Profile ABS half cane 3x1000 mm
1 x Fuel station 20L incl. pump electric
1 x FIALA 20X6 WOODEN 3-BLADE PROPELLER (GAS)
1 x Blind nut M2 (10 pcs)
1 x Cross Connector 4.0 mm x 1000 mm
1 x 12,7x1000 mm 2:1 green termoretract tube
1 x 6,4x1000 mm 2:1 green termoretract tube
1 x 12.7 mm 2:1 black termoretract tube
1 x BALSA trip 10x10x1000 mm
1 x 250 mm / 16 mm Airbrakes
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Wing OXY 0,5 pulgadas2
1 x Adjustable brass horn threaded M3
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Canopy Latch
1 x Oracover Black 2 m
1 x Round Rod 1,0x1000 mm
1 x Ring 320 mm length (5 pcs)
1 x 
1 x SE Ring 450 mm (2 pcs)
1 x Allen wheel collar M4x4
1 x Horn mando small (2 pcs)
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x White smoke canister 140 g
1 x ABS tube 5.0x4.0x1000 mm
1 x 19 mm 2:1 black termoretract tube
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x METEOR 1.000 mm kit
1 x SE Ring 400 mm (2 pcs)
1 x Red silicone 1,0 qmm wire (50 m)
1 x Ventus 1:4 set of instruments
1 x Ball link M1.6 (6 uds)
1 x Clip fixing for wing (2 pcs)
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x 4,8x1000 mm 2:1 red termoretract tube
1 x Black silicone 0,25 mm² wire (25 m)
1 x 2,4x1000 mm 2:1 green termoretract tube
1 x 120x60 mm SLH KOVO wheel
1 x Smoke set "Glider"
1 x Plastic caps for AIR BURTS (30 pcs)
1 x F9F Panther (Aero-naut)
1 x Remote electric ignition system
1 x Glases Stratus
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x Conector JR Servo female (10 pcs)
1 x Extension silicon 50 cm (Futaba)
1 x Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs)
1 x M2,5 Diam metal short ball link V3 (2 pcs)
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Straightened threaded rod M3 - 1m
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x F-104 Starfighter Y/B Aniversary(SebArt)
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x CILINDER FOR DLE55, DLE111, DLE222
1 x 6 mm blue aluminium threaded horn with patella
1 x Round Rod 5,0x1000 mm
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Connectors banna oro 8,0 mm (M/F)
1 x Pilot "Dick" Legends Series (Slimline)
1 x PVC 0,08 qmm Futaba servos wire (5 m)
1 x LENTUS Multiplex Fundas alas
1 x Protective Cover for wires Ø 20 mm 1000 mm
1 x Opale Rucksack
1 x Red smoke canister 140 g
1 x Skyhawk (RBC Kits)
1 x Set cintas unión paracaídas 145 cm
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x PVC 0,35 qmm servos wire Graupner (100 m)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x YAK-15 (RBC Kits)
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x ABS tube 4.0x3.0x1000 mm
1 x Horn DU-BRO 1/2 (2 pcs)
1 x Ferrita 17x10x6.5 mm
1 x Ventral support for AX-18/AX-60
1 x "S" set for planes
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x Cable set PREMIUM , fuselage/wing one4one
1 x Extension silicon 35 cm (Futaba)
1 x Balsa panel 1.5x100x1000 mm
1 x FIALA 22X8 BLACK WOODEN 3-BLADE PROPELLER (GAS)
1 x TRAINER RC Pilot V2 90" w/r ARF
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Extension silicon 30 cm male (Futaba)
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x 2,4x1000 mm 2:1 red termoretract tube
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Oracover CHROME 2m
1 x Prolongador S-Bus JR/JR 20cm
1 x Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x Blue metalic ball link M3/3 azul (2 pcs)
1 x BALSA triangular 8x8x1000 mm
1 x Balsa panel 3.0x100x1000 mm
1 x Mixers smoke bombs AX-60 (5 pcs)
1 x Cable Cargador FUTABA
1 x Blind nut M6 (4 pcs)
1 x Strip 3,5x1,75x330 mm
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Exhaust gasket DA-35 and DA-70
1 x Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
1 x Futaba male 40 cm extension
1 x Extension silicon 75 cm (Futaba)
1 x Long ball link M1.6 (6 uds)
1 x M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x 37 mm PVC transparent battery termo-retract (1 m)
1 x 140 mm rods + T patellas set for direction control
1 x Cap Hispano Aviación
1 x Horn micro type4 Ø 0,5 (2 pcs)
1 x PVC 0,14 qmm servos wire Graupner (100 m)
1 x 45 mm rods set for direction control
38,099.81EUR
Manufacturers
Notifications
NotificationsNotify me of updates to Panel Honeycom carbon 350x150x3.5mm
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce