13.00EUR


[R2101351]


Carbon fibre milled
Yields lightweight, hard filling compouds
For epoxy, polyester, and vinyl ester resins
Milled carbon is made from recycled fibres. The carbon fibres used therefore are equipped largely with PU-sizing. Most of the sizing evaporates due heat generated at the milling process though. When dry the milled fibres form fibre balls, which dissolve and spread out evenly in resin.

Technical Data*:
Carbon fibres content: 100 % (99 %)
including ex-PAN fibres: > 90 %
Carbon content: 94 % (92 %)
Density (g/m³): 1.7 < d < 2.0
Monofilament diameter: 7 µm ± 2
Volume resistivity (average volume resistivity of n (n > 1000) monofilaments): 15 µΩm (max. 20)
Tensile strength: 3500 MPa (3000)
Elongation at break: 1.5 % (1,2)
Tensile modulus: 230 GPa
Median length: 200 µm ± 30

Application:
Manufacture of electrically conductive coatings and adhesives, reinforcement of moulding and fillings.
*Average values obtained from technical data sheets of producers of ex-PAN ‘‘high strength’’ fibres that we use in our mixture for more than 90 %. The ≤ 10 % remaining are ‘‘high modulus’’ fibres from the same producers, i.e. TORAYCA®, TOHO-TENAX, CYTEC... All these values are given as a rough guide.


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x U Profile ABS 5,0x10,0x1000 mm
1 x Profile ABS half cane 2.0x1000 mm
2 x ABS "T" angle 4.0x4.0x1000 mm
1 x Profile ABS half cane 3x1000 mm
3 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
2 x ABS "T" angle 2.0x2.0x1000 mm
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x ABS "T" angle 8.0x8.0x1000 mm
3 x ABS angle 1.5x1.5x1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
1 x U Profile ABS 2,0x4,0x1000 mm
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x U Profile ABS 8,0x4,0x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x SUS wire 3m (nylon coated)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Screw-lock connector M2 (2 uds)
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Steering arm 16 mm Ø 3 mm
1 x Locking cable tie 3.2x142 (uds)
1 x Cap closure 33/23.5mm (2 uds)
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Propeller balancer
1 x Surface Indicator Gauge Small
1 x Angle measurer
1 x Propeller balancer
1 x Angle of incidence meter
2 x WingFix ULTRA Black Edition
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x Tube Pitot to PIXHAWK
1 x Pin hinge 26x11 mm (10 uds)
1 x PPM Encoder Module
1 x 5 mm M2 variable inclined horn
1 x Horn 6/35 with M3 Bearing
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x 1/6 Pilot "Buddy"
1 x Extension silicon 35 cm male (Futaba)
1 x Blade holder center
1 x Screw M3x16
1 x Nut M2
1 x Blade holder center GFK 0,5 mm
1 x Head upper part
1 x Tail boom
1 x Head core bushing
1 x Bearing 3x6x2,5
1 x Bearing housing
1 x Profile ABS triangular 6.0x1000 mm 90º
1 x Profile ABS Square 3 x 1000 mm
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Flat Connector 4.0 mm x 1000 mm
1 x L-Connector 4.0 mm x 1000 mm
1 x Profile ABS half cane 4x1000 mm
1 x ABS rectangular profile 12x6.0x1000 mm
2 x ABS "T" angle 10.0x10.0x1000 mm
1 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x ABS angle 2,0x2,0x1000 mm
1 x Profile ABS triangular 2.0x1000 mm 90º
1 x U Profile ABS 1,0x2,0x1000 mm
1 x Profile ABS Square 2 x 1000 mm
1 x Profile ABS triangular 4.0x1000 mm 90º
1 x U Profile ABS 3,0x6,0x1000 mm
1 x Profile ABS Square 4 x 1000 mm
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Cockpit plastic closing
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x L-Connector 1.0 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Soporte grifo FESTO (2 pcs)
1 x Truck-trailer for gliders 720 x 285 mm
1,257.44EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies