Top » Catalog » Hardware » Batteries » LiPo Batteries » Gens Ace » GEA53004S60X9

76.00EUR

Lipo GENS 5300 mAh 4s 14.8v 60c Hard Case
[GEA53004S60X9]

Gens ace 5300mAh 4S 60C LiPo battery hardcase offers you a very high power and very long run time for your RC cars. These batteries packs are made with superior Lithium Polymer raw materials from Japan and Korea. The advanced stacking technology enables a single cell of capacity to reach 5300mah. They are widely fit the 1/8 Car Model. The hardcase of this 5300mAh 14.8V LiPo battery provides your batteries with very solid protection. They are your ideal choice for the RC car hobby.

Specification
- Product Type:lipo battery pack
- Capacity: 5300mAh
- Voltage: 14.8V
- Max Continuous Discharge: 60C
- Weight: 511g
- Dimensions: 139*46*50mm
- Balance Plug: JST-XHR
- Discharge Plug: XT90

Application
Gens ace 5300mAh 14.8V 60C 4S1P Hardcase Lipo Battery Pack is suited to 1/8 1/10 RC car model such as 1/8 8IGHT-E 2.0 4WD Buggy Race Roller, 1/8 SLEDGE, by Losi, Traxxas, Team Associated SC8E, HPI, Xray 808E, etc.

Capacity 5300 mAh
Discharge Rate (C) 60C
Parallel (P) 1
Voltage 4S (14.8V)
Length (±5mm) 139
Width (±5mm) 46
Thickness(±5mm) 50
Wire Gauge 12#
Wire Length (C/D) 45mm/120mm
Connector Type XT90
Balancer Connector Type JST-XHR

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
    A123 LiFe Batteries
    Accesories
    AIRSOFT Battery
    Lead batteries
    LiIo Batteries
    LiPo Batteries->
      E-Flite
      Gens Ace
      KAVAN
      RAY/FOXY
      ROBBE
      ROI IMPORT
      SPEKTRUM
      TopFuel
    NiMH/NiCd Batteries
    Battery Testers
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Straightened rod Ø 14.0 mm x 1000 mm
19.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	PREMIER AIRCRAFT RV-8 70cc ARF red/blue
1 x	Antena FUTABA R7108/7014/7114SB (1 pc)
1 x	Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver
1 x	Propeller APC 12x10 Glow/Gas
1 x	Fuel station 10L incl. pump electric
1 x	Professional Servo tester
1 x	Fuel station 10L no include pump electric
2 x	M3 Maxi ball link (2 uds)
1 x	Extractor piñones 2.3/3.2 mm
1 x	ASH 31 Mi Scale:1/3 - 7m
1 x	25 mm Sandpaper file
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	SUS wire 3m (nylon coated)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	IKURA 4.0 m
1 x	165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	SE Ring 300 mm (2 pcs)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Smoke set "M"
1 x	Motor DLE 200cc Premium Muffler
1 x	Ply-Span 450x600/13g Blue
1 x	Slave-cable USB Easy Sim
1 x	XH female balance (5S) connector (2 pcs)
1 x	Canopy Astra
1 x	LO 100 ARC 3.3m
1 x	Partall paste 650 g
1 x	Carbon fiber rod 2.0 mmx1000 mm
2 x	Xplorer1 anemometro
1 x	ABS tube 9.0x7.0x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Ball link M2,5 (10 pcs)
1 x	CC 02
1 x	XH female balance (3S) connector (2 pcs)
1 x	Carbon fiber rod 14 mmx1000 mm
2 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	CC 03
1 x	1/10 Pilot "Jack"
1 x	Carburador OS (Type 40K) 46AXII
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	Fiberglass heat shield Ø 8 mm 1000 mm
1 x	CC 01
1 x	Ball Link Plier
1 x	Small flex hinge (12 uds)
1 x	2 mm female connector (2 pcs) with safety connector
1 x	Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs)
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	BULL MØ1 2.600mm YELLOW
1 x	55% silver electrodes (2 pcs)
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	AX-60 starters (5 pcs)
1 x	Long ball link M3 (6 uds)
1 x	Z type of cable coupler Ø 1 (2 uds)
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Z Bender - S Type Tool
1 x	PIX Hawk with accesories
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Yellow smoke canister 140 g
1 x	PCARD Wireless System
1 x	Fixed launching hook
2 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
2 x	Blue smoke canister 100 g
2 x	Buy Perforated film 100 cm / 20 m
2 x	Fiberglass heat shield Ø 6 mm 1000 mm
2 x	Cable S.BUS 3 salidas 300 mm
2 x	Switch for DS: Long 2 Position
2 x	Carbon fiber flat 1000x6.0x0.8 mm
2 x	One Way bearing for EME55 starkit with key
2 x	Locking cable tie 2.5x100 (uds)
2 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Oracover CHROME 2m
2 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
2 x	Cockpit plastic closing
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Interface Jack Adapter IKARUS
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Long ball link M1.6 (6 uds)
1 x	ABS angle 4,0x4,0x1000 mm
1 x	CC 05
1 x	Quicklock washer 1 mm (10 pcs)
1 x	Tube Pitot to PIXHAWK
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Optotronix Aurora Plug
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	160 mm carbon undercarriage (2pcs)
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Dremel 3000 130W
1 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	1/12 Pilot "Tom"
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Spray adhesive AEROFIX 2
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Premium servo extension 100cm
1 x	Horn with ball 40x30
1 x	Windsock Ozone L -1200 mm
2 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	Smoke set "Glider"
1 x	Profile ABS half cane 2.5x1000 mm
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
1 x	White smoke bombs AX-9 (10 pcs)
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Pilot JAN 1/4 Saiplanes
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 5 m
1 x	Servo case HS-225MG/225BB/5245MG
1 x	Universal Colour Paste deep black 250 g
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	XT-60 connector (female)
1 x	Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs)
1 x	5 line servos wire black (1 m)
1 x	3 LiPo XH>EH adapter
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Extra Hard Titanium Herxagon Screwdrivers
1 x	LS-8 GFK 6m Glider
1 x	BULL MØ1 2.600mm RED
1 x	Silicone black 0,5 qmm wire ( 25 m)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Black silicone 1,0 qmm wire (50 m)
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Silicone red 0,75 qmm wire ( 25 m)
1 x	Glases Stratus
1 x	Copier 2x20 cm pcs
1 x	Cable with accesories
1 x	Steering arm 16 mm Ø 3 mm
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Avia spare fouselage CF reinforced (Top Model)
1 x	TP/TopFuel - XH 2/3S Adapter
1 x
1 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	Parachute PV6 for F3J
1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	DLE 85 Ignition unit
1 x	1,5x50 mm allen screwdriver
1 x	2 LiPo XH>EH adapter
1 x	DG-303 ACRO 3750 mm (Airworld)
1 x	Oracover White 10 m
1 x	Screw KB 1.4x6 mm (10 pcs)
1 x	Aero-Master (Aero-naut)
1 x	ABS angle 10,0x10,0x1000 mm
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	Cable coupler M3 (10 uds)
1 x	BIG MOSNTER
1 x	Circlick securite
1 x	Ply-Span 450x600/13g Yellow
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	1/7 Pilot "Japanese"
1 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	Round Rod 1,25x1000 mm
1 x	Initior Receiver FRX2 Wireless
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	Conector BEC male (10 pcs)
1 x	1/6 Pilot "Garry"
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Tray FUTABA T6K,T10J,T12K,T14SG,T16iZ,T18SZ,T18MZ,T32MZ
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	Profile ABS Square 1 x 1000 mm
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	SE Ring 240 mm (2 pcs)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Oils Pumps Empty (1 liter)
1 x	Round Rod 2,0x1000 mm
1 x	CENTRAL PROPELLER BOLT FOR DLE85/111/120
1 x	Gobe R-26S (Airwold)
1 x	Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
1 x	Parachute expulsion foam
1 x	UBEC 6A KAVAN
1 x	SIMtransmitter 6 Mode 2
1 x	Cable S.BUS 3 salidas 100 mm
1 x	XT-30 connector (pair)
1 x	Protective Cover for wires Ø 3 mm 1000 mm
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Cap Hispano Aviación
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Profile ABS triangular 4.0x1000 mm 60º
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Long pinned hinge (12 uds)
1 x	LUCAS pilot ARTF
1 x	Fox 4000 mm (Airwold)
1 x	KAVAN Hand crank fuel pump
1 x	XH male balance (3S) connector (2 pcs)
1 x	Fresa corte diamante Ø 2.35mm (lentil)
1 x	Round Rod 4,0x1000 mm
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	SE Ring 450 mm (2 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Challenger ARF (Top Model)
1 x	Motor DLE 200cc Std
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	White smoke canister 140 g
1 x	Cable set PREMIUM , fuselage/wing one4one
1 x	102x26 Ø6.0 mm aluminium core wheel
1 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	Short ball link M3 (6 uds)
1 x	Spray EC Red 400ml
1 x	MPX-Dean "T" Adapter
1 x	A/C quality beech plywood 498x247x1.2 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Trike XL motor set (motor+esc+prop)
1 x	Pilot "Anthony" (Slimline)

36,949.91EUR