Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Resin/Gelcoat » R1101002

108.00EUR

Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
[R1101002]

Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg

Low viscosity, free of solvents and fillers for impregnating glass, aramid, and carbon fibres.

Approved for the construction and repair of gliders and powered aircraft.
Laminate structures for vehicle construction in combination with hardener 285 are approved by the TÜV-Süd (Document available in german language only).

Mixing ratio:
100 : 40 parts by weight of epoxy : hardener
100 : 50 parts by volume of epoxy : hardener

Processing time: 50 minutes

Curing time: 24 hours at room temperature, followed by hot curing for 15 hours at 55 °C (recommended).

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Mobile Terminal
79.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	6 mm aluminium horn with patella
1 x	Horn 6/35 with M3 Bearing
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Horn with ball 55x40
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Horn for flap control (1 pcs)
1 x	Small aluminium horn gold (2pcs)
1 x	Horn 6/20 with M3 Bearing
1 x	20 mm carbon horn
1 x	Small aluminium horn blue (2pcs)
1 x	SlowFlyer control horn (3 pcs)
1 x	Cable with accesories
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Xplorer1 anemometro
1 x	Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Oils Pumps Empty (1 liter)
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Ball Link Plier
1 x	Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Hot Glue Stick BLACK
1 x	Optical RPM Sensor
1 x	Baseplate servo
1 x	Aluminium servo arm (2 uds)
1 x	AC-10 pre-rotacion with motor
1 x	Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x	Z Bender - S Type Tool
1 x	Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x	DYNAMOMETER S-1580
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Oil FUCHS 1 liter
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Socket head long ball link M3 (2 uds)
1 x	M2,5 5Diam black ball link V2 (2 pcs)
1 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	Ball link M2,5 (10 pcs)
1 x	Joint with bearing M3 22x5,5
1 x	Ball link M3 (10 pcs, flat ball)
1 x	Short ball link M3 (6 uds)
1 x	Joint with bearing M2,5 22x5,5
1 x	M2 5Diam black ball link V2 (2 pcs)
1 x	Long ball link M1.6 (6 uds)
1 x	M3 Maxi ball link (2 uds)
1 x	M2,5 5Diam metal ball link V3 (2 pcs)
1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	M2,5 Diam metal ball link V3 (2 pcs)
1 x	Socket head long ball link M3 (6 uds)
1 x	Long ball link M3 (6 uds)
1 x	M2,5 5Diam short black ball link V2 (2 pcs)
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	Extractor piñones 2.3/3.2 mm
1 x	Socket head ball link M3 (2 uds)
1 x	6 mm ball link M3 (10 pcs)
1 x	Blue metalic ball link M2/2 azul (2 pcs)
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)

4,819.17EUR