Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Resin/Gelcoat » R1101002

108.00EUR

Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
[R1101002]

Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg

Low viscosity, free of solvents and fillers for impregnating glass, aramid, and carbon fibres.

Approved for the construction and repair of gliders and powered aircraft.
Laminate structures for vehicle construction in combination with hardener 285 are approved by the TÜV-Süd (Document available in german language only).

Mixing ratio:
100 : 40 parts by weight of epoxy : hardener
100 : 50 parts by volume of epoxy : hardener

Processing time: 50 minutes

Curing time: 24 hours at room temperature, followed by hot curing for 15 hours at 55 °C (recommended).

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

A/C quality beech plywood 600x300x6.0 mm
17.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
2 x	Parachute BACKUP X100
1 x	Parachute PV6 for F3J
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Adaptadores carga 6s JST-XH
1 x	SE Ring 360 mm (2 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Ring 320 mm length (5 pcs)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	20x1000 mm Ring Strap Back To Back
1 x	SE Ring 450 mm (2 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Marker ties (20 pcs)
1 x	SE Ring 200 mm (2 pcs)
1 x	Turbina KINGTECH K320 G5
1 x	SE Ring 300 mm (2 pcs)
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	SE Ring 240 mm (2 pcs)
1 x	20x200 mm battery rings
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Crimping tool
1 x
1 x	SE Ring 480 mm (2 pcs)
1 x	Extension MPX-MPX 20 cm
1 x	Tape GFK 50 mm
1 x	Cinta Goldfix 1m
1 x	SE Ring 350 mm (2 pcs)
1 x	Tape GFK 38 mm
1 x	SE Ring 400 mm (2 pcs)
1 x	Softshell Hispano Aviación
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	140 mm rods + T patellas set for direction control
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	Allen wheel collar M4x4
1 x	80 mm rods set for direction control
1 x	45 mm rods set for direction control
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Allen wheel collar M3x3
1 x	Cable tie mounts 4.3 (4 uds)
1 x	Clip fixing for wing (2 pcs)
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Cap Hispano Aviación
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	41x5,5 mm wires output (2 pcs)
1 x	Canopy Latch
1 x	Allen wheel collar M4x6
1 x	250 mm / 16 mm Airbrakes
1 x	Vest clothes Hispano Aviación
1 x	45 mm rods + T patellas set for direction control
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Allen wheel collar M3x5
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Spinner Alumin. fixed propeller 30 mm / 3,0 mm
1 x	Spinner Alumin. fixed propeller 40 mm / 5,0 mm
1 x	Spinner NUT M6
1 x	Spinner Alumin. fixed propeller 40 mm / 3,2 mm
1 x	Spray adhesive AEROFIX 2
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Partall paste 650 g
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Universal Colour Paste white 50 g
1 x	Plasti Dip Liquid Tape 429 ml orange
1 x	Aluminium sheet 500x250x0,5mm
1 x	Nitroverdu 500 ml
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	1000 ml sealer (DOPE)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	20 g tin paste
1 x	Buy Perforated film 100 cm / 10 m
1 x	Buy Perforated film 145 cm / 50 m
1 x	Spannlack 1000 ml
1 x	ABS 500 x 400 x 1 mm (white)
1 x	Buy Perforated film 100 cm / 20 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Universal Colour Paste deep black 250 g
1 x	Hobbylite Filler, Balsa colour
1 x	ABS angle 10,0x10,0x1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Profile ABS Square 4 x 1000 mm
1 x	Profile ABS triangular 4.0x1000 mm 90º

7,850.58EUR