3 x | Ferrita con funda |
2 x | White smoke bombs AX-60 (5 pcs) |
2 x | Black silicone 1,0 qmm wire (50 m) |
1 x | Surface Indicator Gauge Small |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Legs + electric brakes for Viper Jet 1700 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
3 x | Indoor landing gear set |
1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | ABS I Strip 20x10x1000 mm |
2 x | Conector BEC male (10 pcs) |
2 x | Angle of incidence meter |
3 x | Smoke set "M" |
2 x | Monokote ROJO misil (1.8x0.65m) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
3 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
2 x | Motor A2212/13T |
2 x | PVC 0,14 qmm servo wire Futaba (5 m) |
2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Tube Pitot to PIXHAWK |
2 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Jeti Black cap |
2 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
3 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Large flex hinge (12 uds) |
2 x | Connectors banna oro 8,0 mm (M/F) |
2 x | 1 m servo "Premium" wire (white/red/blue) |
5 x | Retract electric landing gear 120 - Viper |
1 x | Long ball link M3 (6 uds) |
1 x | Joint with bearing M3 22x5,5 |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
3 x | Red smoke canister 140 g |
1 x | Aluminium wide washer M4 Black (4 pcs) |
2 x | Extension silicon 50 cm (Graupner) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
2 x | White smoke canister 100 g |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | PARAGON Trainer 46-55 1580 mm |
1 x | Festo Adaptor Tygon Large/4mm |
5 x | Retract electric landing gear 90 - Viper |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | Propeller balancer |
1 x | Field folding model stand SebArt |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
2 x | Extension silicon 75 cm (Futaba) |
3 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
3 x | Socket head ball link M3 (2 uds) |
1 x | Pulley brass 16/2 (2 pcs) |
2 x | M2,5 5Diam black ball link V2 (2 pcs) |
2 x | 12,7x1000 mm 2:1 green termoretract tube |
2 x | ABS Strip 1.5x8.0x1000 mm |
2 x | Red smoke canister 65 g |
2 x | 15 mm reinforced hinge |
1 x | Cabel "Y" 30 cm (graupner) |
2 x | Connectors banna oro 3,5 mm (M/F) |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | 2.3 mm Adapter for 30 mm spinners |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
2 x | Kwik link with arm M3xM2xL24 |
1 x | Brass ball links BS M3 V1 (10 pcs) |
2 x | Protective Cover for wires Ø 15 mm 1000 mm |
2 x | Angled clevis with threaded rod M3 |
1 x | Towing hook |
1 x | Field folding model stand |
1 x | 4 mm Prop Adapter M6 |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | VAGABOND 1500 mm ARF V2 (Red) |
1 x | M3 Maxi ball link (2 uds) |
2 x | Socket head ball link M3 (2 uds) |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
2 x | Remote electric ignition system |
1 x | Aero shocks |
2 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
1 x | Towing hook <3m |
1 x | Cabel charger transmitter GRAUPNER |
1 x | MPX Support (2 pcs) |
1 x | Swift ARF 2000 mm Red (Hacker Model) |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
3 x | 1,2x1000 mm 2:1 red termoretract tube |
1 x | Round Rod 5,0x1000 mm |
3 x | Connector CAN 15 |
3 x | Pin type hinge Al 6x98 mm (2 pcs) |
2 x | Protective Cover for wires Ø 20 mm 1000 mm |
2 x | Strip 3,5x1,75x330 mm |
1 x | Central support Speed 280 |
2 x | 120 mm leg for retract undercarriage with rotation sistem (1 pcs |
2 x | Ferrita 14x8x5.5 mm |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | XH male balance (6S) connector (2 pcs) |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
2 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | 2,3 mm Prop Adapter M6 |
1 x | 3,2 mm Prop Adapter M8 |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | White large kwik link (10 pcs) |
2 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | Landing gear clamp for Ø 3 mm (4 uds) |
2 x | White smoke bombs AX-9 (10 pcs) |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Micro flex hinge (12 uds) |
1 x | Extension silicon 50 cm (Futaba) |
1 x | Yellow smoke canister 100 g |
1 x | Ferrita 17x10x6.5 mm |
2 x | Bearing block for noseleg landing gear |
1 x | Green smoke canister 65 g |
1 x | |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Threaded coupler M3 (10 uds) |
1 x | Silicone black 0,5 qmm wire ( 1 m) |
1 x | switch 1-Spring-UP 3-position DC Tx DUPLEX 2,4EX |
1 x | Green silicone 0,25 mm² wire (25 m) |
1 x | White smoke bombs AX-3 (10 pcs) |
2 x | Flybar support metal LAMA |
1 x | Round Rod 3,0x1000 mm |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Ø 40 mm fiberglass motor-holder for electric motors |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Lunak ARF 2000 mm Yellow (Hacker Model) |
1 x | White smoke canister 65 g |
1 x | Dual Sequencer Gear and Canopy |
2 x | PCARD Wireless System |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
2 x | Fiberglass landing gear for 140-160 |
1 x | Threaded coupler M2 (10 uds) |
1 x | Motor mount for 1200 mm models |
1 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
1 x | Extension silicon 35 cm (Futaba) |
2 x | 400 Newtons FEMA absorber |
2 x | 6,4x1000 mm 2:1 blue termoretract tube |
2 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
2 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | White smoke canister 140 g |
3 x | ABS Strip 1.0x4.0x1000 mm |
1 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
1 x | Metal clevis M3 (10 uds) |
1 x | switch short 3-position DC Tx DUPLEX 2,4EX |
1 x | Electromagnets brake |
1 x | Air pressure gauge |
1 x | Servo HITEC HS-5245 MG Digi |
3 x | Parachute expulsion foam |
1 x | Servo HITEC D951 TW |
1 x | 3 LiPo XH>EH adapter |
2 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
2 x | Smoke set "Glider" |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
3 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | Conector JR Servo female (10 pcs) |
1 x | Silicone black 1,0 qmm wire (100 m) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
2 x | 25 mm reinforced hinge |
1 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
2 x | Red silicone 1,0 qmm wire (50 m) |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | 290 mm 290 mm M5x18 mm shaft ship |
1 x | Long pinned hinge (6 uds) |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | "M" set |
1 x | Joint with bearing M2 22x5,5 |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Balls 4 mm |
1 x | Blades 330mm |
2 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
2 x | Servo TT ACE SHV 1504 MG |
1 x | HITEC 20 mm servo arm with ball link |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Nose leg 155 mm with wheels 70 mm |
1 x | Landing gear strap medium (4 uds) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | Foam wheel Ø 351 mm (2 pcs) |
1 x | Yellow smoke canister 65 g |
1 x | Electric Landing Gear ODYSSEY (Elektron Retracts) |
1 x | Absorver mount set for 5-10 Kg models |
1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Right hydropropeller) |
1 x | Short ball link M1.6 (6 uds) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
2 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR) |
2 x | Green smoke canister 140 g |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Cooler motor type 300 |
2 x | Retract Landing gear ER40 Combo Xcalibur complete |
1 x | Coversion set HIROBO EX/EAGLE elektro |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Crystal RX 35.250 Ch 285 |
1 x | Distanzstück motor OS 120 AX |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Battery LiPo GENS 120 mAh 2S 7.4V 30C (Gens Ace) F3P Pack |
1 x | Head core |
1 x | Body for landing gear Ø 3 mm |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | Extension Arm for Carburetor (red) |
1 x | Switch Nutspanner for JETI Duplex Transmitter DC / DS |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
3 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | PIX Hawk with accesories |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Motor DA 100L |
1 x | Extension silicon 25 cm (Graupner) |
1 x | switch long 3-position DC Tx DUPLEX 2,4EX |
2 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Servo HITEC HS-225 BB |
1 x | Tray JETI for DS-14/16/24 Black |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | Extension silicon 75 cm (Graupner) |
1 x | Propeller CFK 14.5x10 Slim |
2 x | ORACOVER Ferrari red (2 m) |
3 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Transmitter JETI Duplex DC-24 EX Carbon Line Multimode |
1 x | PVC transparent black termo-retract battery 185 mm (1 m) |
1 x | 4 mm Prop Adapter M8 |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | Silicone red 4,0 qmm wire ( 1 m) |
1 x | Birch plywood plate 600x300x4.0 mm |
2 x | Gates hinge |
1 x | Battery LiPo GENS 4800 mAh 5S 18.5V 18C (Gens Ace) |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | Gear set HITEC HS-125MG/5125MG |
1 x | Propeller RABOESCH M5 65 mm (4 Blades) (Right hydropropeller) |
2 x | Ball link M3 (10 pcs, flat ball) |
1 x | DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS |
1 x | White aluminium 230 mm landing gear |
1 x | 4 mm Prop Adapter M8 |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | RB-45 Electronic |
1 x | GS-200 Electronic |
1 x | Battery LiPo GENS 450 mAh 3S 11.1V 25C (Gens Ace) |
1 x | Blade holder center |
2 x | Protective Cover for wires Ø 3 mm 1000 mm |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
2 x | Pulley brass 8/2 (2 pcs) |
1 x | Transmitter JETI Duplex DC-24 EX Carbon Line DARK Red Multimode |
1 x | Landing gear strap small (4 uds) |
1 x | Propeller 8x4,3 SlowFlyer |
2 x | Connectors banna oro 6,0 mm (M/F) |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Silicone red 0,75 qmm wire ( 1 m) |
1 x | 3l Smoke oil |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Sparkplug 1/4-32 Glow |
2 x | EnLink 2RS Plus - DUO |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | FesEx-Uni8 System |
1 x | Cooler motor type 280 |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Crystal RX 35.030 Ch 63 |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Propeller 3x2 |
1 x | 4 LiPo XH>EH adapter |
1 x | Turnbuckle M2,5x32/48 (2pcs) |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
2 x | Manual Controller |
1 x | switch long 3-position DS Tx DUPLEX 2,4EX |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | ER-40eVo Set B [Complet Set + GS200] |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Motor DA 120 |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Red 3m5 mm connector holder |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Festo 6mm Tubing Holder (10 uds) |
1 x | Transmitter JETI Duplex DC-24 EX Carbon Line DARK Orange Multimo |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Oracover Brown 2 m |
1 x | Ball link M1.6 (6 uds) |
1 x | Propeller RABOESCH M5 130 mm (4 Blades) (Left hydropropeller) |
1 x | wire tensioner (blue) |
1 x | Car Charger DC/DS-16 |
1 x | Rigid coupling brass Ø 3 mm L: 20 mm |
1 x | Reed valve for DA 50-R |
1 x | Brushless ESC 30A F-450 |
2 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Head upper part |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell |
1 x | Pulley brass 5/1,5 (2 pcs) |
1 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Motor DLE 170 M- Paramotors |
1 x | 3,2 mm Prop Adapter M6 |
1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Crystal RX 35.010 Ch 61 |
1 x | Oracover Yellow CUB 2 m |
1 x | Blue smoke canister 100 g |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | Legs + electric brakes for Viper Jet 90 |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Foam wheel Ø 38 mm (2 pcs) |
1 x | Battery LiPo GENS 450 mAh 2S 7.4V 25C (Gens Ace) |
1 x | F9F COUGAR Grey ARF 1.562 mm |
1 x | 6 mm M3 variable horn |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Central piece 62 mm 0º |
1 x | Strut Set ASPIRE (without wheels) |
1 x | Nose leg 155 mm with wheels 70 mm |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Propeller RABOESCH.Ms 60R (5 Blades) (Right hydropropeller) |
1 x | XT-60 connector (male) |
1 x | Balsa panel 6.0x100x1000 mm |
2 x | Switch for DC: Long 3 Position |
1 x | BABY glider (Aero-naut) |
1 x | Central piece 47 mm + 2,5º |
1 x | Propeller RF CFK 13x6.5 |
1 x | PH5 adapter for 5mm M8 axi for AXI2820 y 2826 |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
3 x | Extension silicon 25 cm (Futaba) |
1 x | Xplorer1 anemometro |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | ODYSSEY ARF 2190 mm + Electric Landig Gear,COMBO |
1 x | Spare white 38-45 mm spinner |
1 x | ABS angle 5,0x5,0x1000 mm |
3 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | Brake disc Electron Retracts |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | SU 29S 140 carbon landing gear |
1 x | Silicone red 1,5 qmm wire ( 1 m) |
1 x | FUTABA T10 J T-FHSS |
1 x | E_brakes electronics |
1 x | JU87B STUKA 60cc ARF - BlackHorse |
1 x | Small Crow DLE-170M |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | EXCITE S400 Pylon |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Futaba Female 40 cm extension |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | "S" set for planes |
1 x | Silicone red 1,5 qmm wire ( 25 m) |
2 x | Hand Pads for Tray JETI |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Propeller CFK 13x9 |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | Wheel FEMA 100 mm / 6 mm |
1 x | Round Rod 6,0x1000 mm |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | Futaba BLS152 - Upper Case |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Electric coversion set |
1 x | XH male balance (4S) connector (2 pcs) |
1 x | 2 mm Prop Adapter M6 |
1 x | wire tensioner (red) |
1 x | DLE 55 carburetor |
2 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | MPX-Dean "T" Adapter |
1 x | Micro Crystal RX 35.090 Ch 69 |
1 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
1 x | F9F COUGAR Red ARF 1.562 mm |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
2 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
1 x | Black tray 2,4EX DC-16/14/24 black |
1 x | Esc MasterSPIN 66 Pro |
1 x | Top light bright 10mm/3V (2 pcs) |
1 x | RC Power Switch 5A |
1 x | Futaba Neckstrap |
1 x | Silicone black 6,0 qmm wire (25 m) |
1 x | Lipo GENS Soaring 3300 mAh 2s 7.4v 30C |
1 x | Propeller CFK 15x16 |
1 x | ER40 Front Leg (with wheel 80mm) |
1 x | Futaba TM-24 "F" Series 2.4GHz T-FHSS Module |
1 x | Round Rod 2,0x1000 mm |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Body for landing gear Ø 4 mm |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Central piece 42 mm + 2,5º |
3 x | Initior Receiver FRX2 Wireless |
1 x | Glider IKARUS |
1 x | Fan for A60 |
1 x | Spring clamp for tube Ø50 mm |
2 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Exhaust elbow for SAITO FA65/72/80/82a/91S/100/ |
1 x | Head runner |
1 x | Focke Wulf FW-190A-8 93", Electric retract Landing gear |
1 x | Gear set HITEC HS-225 |
1 x | BEC 3A FOXY |
1 x | Futaba FX36 2.4GHz FASST Test + R7008SB |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Left hydropropeller) |
1 x | PPM to Jack link - Tx Red (stereo) DC/DS Tx DUPLEX 2,4EX |
1 x | Turnbuckle M2x22/35 (2pcs) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Carbon blade 3D 230 mm |
1 x | Blue smoke canister 140 g |
2 x | Ferrita 27x14x7 mm |
1 x | Crystal RX 35.160 Ch 76 |
1 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
2 x | 4 mm M3 red control terminal (4 pcs) |
1 x | Oracover Azul Cielo 2 m |
1 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | Transmitter JETI Duplex DS-12 EX Multimod BLUE |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Ø 28 mm fiberglass motor-holder for electric motors |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Electric Landing Gear F9F COUGAR |
1 x | DA 70 Twin Gas Engine |
1 x | White Thread 0.50 mm x 20m |
2 x | Conector Servo female 4 pines |
1 x | Landing gear clamp for Ø 2 mm (4 uds) |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Thruster propeller 30/33 mm with motor 400 7,2V |
1 x | ASPIRE Red ARF 2.000 mm |
1 x | Control horn long w/ball |
1 x | Electric Fuel pump |
1 x | Gear set HITEC HS-7950TH |
1 x | Hinge 4x14 mm (20 pcs) |
1 x | EME 55 cc carburetor WALBRO |
1 x | Motor class 550 + "M" gearbox 2,85:1 |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | Battery LiPo GENS 4000 mAh 2S 7,4v RX (Gens Ace) |
2 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
1 x | 460 mm EPP Floats |
1 x | XT-30 connector (pair) |
1 x | JETI Counter for DC-24 Carbon Design 3 |
1 x | Servo HITEC HS-53 |
2 x | Conector FUTABA Servo male (10 pcs) |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | Blue silicone 0,5 qmm wire (50 m) |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Left hydropropeller) |
1 x | Battery LiPo GENS 5000 mAh 2S 7.4V 50C (Gens Ace Hard Case) |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
2 x | 10 mm Quick clamp_L (6 pcs) |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | MG cannon 1.8 cm (5 pcs) |
1 x | Esc X-55-SB-Pro |
1 x | Circlick securite |
1 x | Race 300 |
1 x | Prolongador S-Bus JR/JR 20cm |
1 x | Adhesive epoxy structures RESOLTECH 3350 (1 kg) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
1 x | Extension PVC 150 cm (Graupner) |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Housing Ø 15 mm (20 pcs) |
1 x | Glider STROLCH |
1 x | Flap hinge (6 pcs) |
1 x | CN-Spinner propeller pleg. 36 mm / 6 mm |
1 x | Housing Ø 4 mm (2 pcs) |
1 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | EDGE 540-A 74" (1880 mm) |
1 x | Catalog AERO-NAUT 2016 |
1 x | 18 mm reinforced hinge |
1 x | Balsa panel 10x100x1000 mm |
1 x | DG-303 ACRO 3750 mm, canopy |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | Conector JR Servo female (10 pcs) |
1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | Protective Cover for wires Ø 10 mm 1000 mm |
1 x | Bag connector 2 mm |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
1 x | Marker ties (20 pcs) |
1 x | 20x200 mm battery rings |
1 x | Connectors DEANS (T) micro |
1 x | Tape GFK 50 mm |
1 x | Ring 320 mm length (5 pcs) |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | SE Ring 350 mm (2 pcs) |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | Cinta Goldfix 1m |
1 x | SE Ring 200 mm (2 pcs) |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | Spikes Band (5 m) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | 30 cm DEANS female connector |
1 x | SE Ring 450 mm (2 pcs) |
1 x | 30 cm MULTIPLEX female connector |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Conector FUTABA Servo female (10 pcs) |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Connectors DEANS (T) |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | SE Ring HACKER 300 mm (2 pcs) |
2 x | Conector BEC female (10 pcs) |
1 x | Cable set PREMIUM , fuselage/wing one4one |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | Conector JR Servo male (10 pcs) |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
1 x | Cable set PREMIUM, fuselage/wing |
1 x | Conector JR Servo male (10 pcs) |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | SE Ring 250 mm (2 pcs) |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | Tape GFK 38 mm |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | XH female balance (4S) connector (2 pcs) |
1 x | XH male balance (3S) connector (2 pcs) |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | Optotronix Aurora Plug |
1 x | Gold antispark 4 mm plug |
![](images/pixel_black.gif) |
45,457.35EUR |