Inicio » Catálogo » Aviones » Turbina » TopRCModel » JPHTRCF16

1,208.99EUR

Tren electrico JP ER200 F-16 1:6 TOPRC
[JPHTRCF16]

JP Hobby ER-200 Tricycle Full set with Brakes and Controller for TOP RC F-16 1:6 model

CNC Machined aluminium articulated and mechanical suspended « scale » electric landing complete gear set including 95mm and 70mm wheels with brakes system and 3 retracts with a JP Hobby multifunction landing gear and doors sequencer V1/V2 and an Electrical Magnetic Brake Controller system ALF. Main gear and single nose gear. A great upgrade for the Top RC F-16 1:6, it can be also used with other planes up to 30kg.

Note: The spacing of the landing gear mounting screw holes on the bracket in the aircraft fuselage may require modification.

Specifications
Materials: Aluminium
Suspension: mechanical
Wheels: ball bearings mounted
For planes up to 30kg
Linkage for nose gear
Technical Specifications
Struts diameter: 14mm (Main) - 18mm (Front)
Main gear wheels diameter: 95mm
Nose gear wheel diameter: 70mm
Wheels axle diameter: 8mm (Main) 6mm (Nose)
Nose Gear Servo dimensions: 36mm x 15mm
Weight: 1918g (for the complete set including the 3 struts, 3 retracts, wheels and the 2 sequencers)
Dimensions: for detailed dimensions, please refer to the pictures
Working voltage: 7.4-8.4V (2S LiPo)
Brake working voltage: 7.2-30V

Content
2x Scale metal struts for main landing gear equiped with 95mm wheels & brakes system
1x Scale metal strut for nose gear equiped with 70mm wheel and linkage
2x Electric Retracts motors JP Hobby ER-200 (main gear)
1x Electric retract motor JP Hobby ER-150 (nose gear)
1x JP Hobby Multifunction Landing Gears and Doors Sequencer
1x JP Hobby Electrical Magnetic Brake Controller system ALF
Compatible with Top RC F-16 1:6
Requires
2 cells battery
Nose direction servo
Note: JP Hobby landing gear, like most landing gear that are not delivered directly with the models, uses standard retracts, designed for the size and weight of the aircraft, but whose size brackets and the spacing of the holes in the brackets may vary. JP Hobby manufactures a number of retracts in different sizes but cannot offer a specific model for every make and model on the market. An adaptation of the mounting plate may be required.

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
  Aluminio
  Kits construcción
  Eléctricos->
  Gasolina-Glow->
  Turbina->
    AEROFOAM
    BAJA Jets
    BOOMERANG RC-JETS
    GLIDER.IT
    GLOBAL JET CLUB
    GRUMANIA Jets
    HANGAR 9
    HISPANO AVIACION->
    JET-TENG MODELS
    JMB Jets Models
    PAF Modellbau
    PILOT RC
    RIPMAX->
    SEBART->
    SKYMASTER
    TopRCModel
  FPV
  Vuelo Circular
  Línea Infantil
  Planos aviones
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Regulador Hobbywing Platinum 260A HV SBEC V5
520.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Fresa corte diamante Ø 2.35mm (lentil)
1 x	Juego llaves allen Extra-duro Titanium (1.5/2.0/2.5/3.0)
1 x	Medidor digital de peso, equilibrio y angulos BASIC
1 x	Electrodos de plata 55% (2 pcs)
2 x	Bascula precision 0.1-2000 g
2 x	Crimpadora
2 x	Alicate para "Ball-Link"
1 x	Disco Corte Proxxon/Dremmel 22 mm
2 x	Destornillador allen 1,5x50 mm molibdeno
1 x	Lija cóncava-convexa con papel de 13 mm
2 x	Tijeras curvas 16cm - GFK/CFK/Aramid
2 x	Alicate para "Ball-Link"
1 x	Corta tubos aire
1 x	Acumulador polvo para limpieza moldes
1 x	Tijera electrica
1 x	Lima fina PERMAGRIT para Dremel
2 x	Soporte soldadura universal aluminio
2 x	Copiador 5 unidades de 20 cm
1 x	Fresa corte diamante Ø 2.35mm (flame)
2 x	Copiador 2 unidades de 20 cm
1 x	Lima redonda PERMAGRIT 18 mm para Dremel
2 x	Destornillador allen 3,0x60 mm molibdeno
2 x	Destornillador allen 2,0x50 mm molibdeno
1 x	Banda lijado g. 180 "Carburo de Silicio" para BSL 220/E (5 pcs)
1 x	Banda lijado g. 80 para BSL 220/E (5 pcs)
1 x	Banda lijado g. 120 para BSL 220/E (5 pcs)
1 x	Destornillador Torx® TX6
1 x	Alicate para hacer "Z"
1 x	Alicate para hacer "Z"
2 x	Arrancador 12v (Max 180 and 30ccm)
1 x	Barra pegamento caliente Negro
1 x	Arrancador Sullivan-STAR 601
1 x	Arrancador 12v (Max 90 and 15ccm)
2 x	Bascular < 40 Kg
1 x	Banda lijado g. 180 para BSL 220/E (5 pcs)
1 x	Crimpadora
1 x	Barra pegamento caliente Verde
1 x	Arrancador EM Gear Power 80
1 x	Bolsas inyectoras desechables (30x16cm) 100 pcs
1 x	Arrancador Sullivan-STAR 603 DINATRON
1 x	Destornillador allen 2,5x60 mm molibdeno
1 x	Destornillador Allen 1.5 mm
1 x	Destornillador Torx® TX8
1 x	Bomba de vacio 12 CFM completa
1 x	Oratex Yellow Cub 10 m
1 x	Oratex Red Fokker 10 m
1 x	Oratex Silver 2m
1 x	PROFICOVER 5m
1 x	Oracover Naranja 2 m
2 x	Oracover Verde 10 m
1 x	Oracover Amarillo CADMIO 10 m
1 x	Oracover Rojo 2 m
1 x	Instrumentos individuales 1/4 Planeador
1 x	Oracover Rojo Fluor (2 m)
1 x	Ply-Span 450x600/13g Blanco
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	Oracover Amarillo transparente (10 m)
2 x	Oracover Azul Cielo 2 m
1 x	Oracover Blanco 2 m
1 x	Set Perma-Grit "Fine" 7 piezas
1 x	Plancha para entelar mini
1 x	Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
2 x	Roller cutter 28 mm
4 x	Punta recambio soldador KAVAN 668838
2 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Soporte lija 25 mm
1 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x	Pincel laminar 10 mm (50 pcs)
1 x	Tijera Aramid 21 cm/8" PROTON
1 x	Pistola termica MH 550 micro
1 x	Plancha entelar Std
1 x	Bisagra cilíndrica 33 mm Ø 2 mm (5 pcs)
2 x	Bisagra de nylon flaps 33x9 (2 pcs)
1 x	Bisagra cilíndrica 4,5 Ø x 12 x 67 mm (10 pcs)
1 x	Bisagra de aluminio tipo PIN 4,5x70 mm (2 pcs)
1 x	Bisagra de Flaps 33x9 mm (6 uds)
1 x	Bisagra de aluminio tipo PIN 6x98 mm (2 pcs)
1 x	Bisagra cilíndrica 4,5 Ø x 12 x 76 mm (10 pcs)
1 x	Bisagra papel CA (12 uds)
2 x	Bisagra Cabina Discus 2c, 2a, Ventus 2cx (2 pcs)
1 x	Adaptador USB para elementos Jeti DUPLEX
1 x	Circlick seguridad
1 x	Cable "Y" carga 4 mm (2 IN-1 OUT)
1 x	Adaptador MPX-XT60 10cm
1 x	Adaptador 4 LiPos XH>EH
1 x	CM-3
1 x	CC 02
1 x	Cable BEC 30 cm (macho)
1 x	Alambre de cobre esmaltado Ø0,2 mm (5 m)
1 x	Cable Futaba voltaje externo para telemetria
1 x	Adaptador TP/TopFuel - XH 2/3S
1 x	Gorra Jeti Negra
1 x	Varilla latón hexagonal Ø 5 mm x 1000 mm
1 x	Varilla acero Ø 2,0 mm x 1000 mm
1 x	Varilla Aluminio Ø 4,0 mm x 3000 mm
1 x	Varilla latón Ø 0,8 mm x 1000 mm
1 x	Varilla acero Ø 1,0 mm x 1000 mm
1 x	Varilla latón Ø 1,5 mm x 1000 mm
1 x	Varilla acero Ø 14,0 mm x 1000 mm
1 x	Varilla acero Ø 1,5 mm x 1000 mm
1 x	Varilla acero Ø 8,0 mm x 1000 mm
1 x	Varilla acero roscada M3 -1m
1 x	Varilla acero Ø 6,0 mm x 1000 mm
1 x	Varilla acero Ø 2,5 mm x 1000 mm
1 x	Varilla acero Ø 1,2 mm x 1500 mm
1 x	Varilla acero Ø 4,5 mm x 1000 mm
1 x	Varilla acero Ø 5,0 mm x 1000 mm
1 x	Anemometro Xplorer4
1 x	Cable acero trenzado Ø 0,62 mm (10 m)
1 x	e-Looger V3
1 x	Abrazadera 2.5x100 (20 uds)
1 x	DINAMOETRO S-1580
1 x	Dremel 3000 130W
1 x	Liston ABS I 3,5x1,75x330 mm
1 x	Varilla ABS 6,0x1000 mm
1 x	Suncover 100cc Red
2 x	Set brocas PROXXON 0.5-3.2mm (10 pcs)
1 x	Barra pegamento caliente Rojo
1 x	Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x	Brazo servo 25 mm Futaba con rótula M3
1 x	Brazo servo redondo 30 mm Hitec
1 x	Oracover Amarillo CADMIO 2 m
1 x	Brazo servo 17 mm con rótula DES Graupner
1 x	Servo HITEC HS-485 HB
1 x	Brazos carbono para HITEC HS 65 (4 pcs)
1 x	Servo TOPMODEL DS1413 T
1 x	Brazo servo aluminio HITEC HS-125MG/5125MG
1 x	Servo HITEC D954 TW
1 x	Pincel Gr.5
1 x	Perforador hélices para DLE111 y DA85-150
1 x	Varilla silverlot 45% - 1,50x500 mm (2 pcs)
2 x	Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x	Oracover Rojo Ferrari (2 m)
1 x	Servo DITEX TD2612S
1 x	Brazo servo 38 mm Futaba con rótula
1 x	Servo HITEC HS-45 HB
1 x	Brazo servo redondo 30 mm Futaba
2 x	Tubo bomba vacio 8/6 mm transp. (25 m)
1 x	Brazo servo 17 mm con rótula FUTABA
1 x	Tapa de servo micro-mini 57 mm
1 x	Servo HITEC HS-311
1 x	Set de piñones metálicos HS81MG/5082MG
1 x	Brazo servo 54 mm Futaba con rótula
2 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Set de horns HS-65HB/MG, 5065MG
1 x	Brazo servo doble pull-pull HUB alumin.76/92 mm Futaba con rótul
1 x	Servo HITEC HS-55
1 x	Oracover Marrón 2 m
1 x	Brazo servo 25 mm Hitec con rótula M3
2 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	Servo HITEC HS-5245 MG Digi
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	Plancha para entelar
1 x	Guantes M vynyl IDEAL Light (100 pcs)
1 x	Brazo servo aluminio V1-Futaba 20 mm M2 rojo
1 x	Tacometro HANGAR 9 digital
1 x	Brazo servo aluminio V2-Hitec 2,0" M3 azul
1 x	Brazo servo doble aluminio V1-Futaba 2,5" M3 (rojo)
1 x	Herramienta enrollador alambre (Kwik Twist Tool DU301)
1 x	Molde conector MPX V1
1 x	Gafas Nimbus "Black"
1 x	Funda plancha entelar PROF
1 x	Bisagra de aluminio tipo PIN 3,0x50 mm (2 pcs)
1 x	Gafas Stratus
1 x	Bisagra Redonda flexible (12 uds)
2 x	Bisagra 25 mm reforzada
1 x	Bisagra Micro flexible (12 uds)
1 x	Soldador 100W/200V
1 x	Gafas Ace
1 x	Bisagra Pequeña flexible (12 uds)
1 x	Doblador de tubos
1 x	Bisagra 18 mm reforzada
1 x	Bisagra PIN mediana (12 uds)
1 x	Bisagra de nylon 15x0,3 (10 pcs)
1 x	Bisagra cilíndrica 2,5 Ø x 10 x 43 mm (10 pcs)
1 x	Bisagra correa de latón en miniatura 1m
1 x	Bisagra pin 34x16 mm (10 uds)
1 x	Gafas Innovation Plus
1 x	SkyMaxx 1.550 mm (kit)
1 x	Bisagra papel lite CA (12 uds)

7,913.04EUR