Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Resin/Gelcoat » R1101201

39.25EUR

Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
[R1101201]

Hardener for Epoxy Resin L 285
Processing time: 50 minutes
Mixing ratio:
100 : 40 parts by weight of Epoxy Resin L 285 : Hardener 285
Curing time: 24 hours at room temperature, followed by hot curing for 15 hours at 55 °C
Please order Epoxy Resin L 285 separately
Laminate structures for vehicle construction in combination with this product and Epoxy Resin L 285 are approved by the TÜV-Süd.
Laminate structures for vehicle construction in combination with this product are approved by the TÜV-Süd. Process instructions/TÜV-Report (unfortunately only in German)
For further technical data and detailed information on processing, please refer to the comprehensive PDF "Technical Information on System L 285" (to be found in the appendix under "Article Information").
Former brand names: Hexion®, Bakelite®

under request

Reviews

1 x	Paramotor Trike XL
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	VBar Control Touch, midnight black
1 x	Support ECU Xicoy X-45
1 x	Xplorer1 anemometro
1 x	ABS tube 6.0x4.0x1000 mm
1 x	Premium servo extension 100cm
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	ABS tube 12.0x10.0x1000 mm
1 x	Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x	Recessed MPX connector support (6 pcs)
1 x	Interface Jack Adapter IKARUS
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Circlick securite
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	ABS tube 7.0x5.0x1000 mm
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Support pumb/filter Xicoy X45
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	ABS tube 4.0x3.0x1000 mm
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Slave-cable USB Easy Sim
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Hot Glue Stick BLACK
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Cabel "Y" 15 cm
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Support conector MPX (6 pcs)
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Extension 30 cm (Futaba)
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Baseplate servo
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)

2,604.04EUR

39.25EUR

Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g[R1101201]

under request

Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
[R1101201]