Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Resin/Gelcoat » R1101201

39.25EUR

Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
[R1101201]

Hardener for Epoxy Resin L 285
Processing time: 50 minutes
Mixing ratio:
100 : 40 parts by weight of Epoxy Resin L 285 : Hardener 285
Curing time: 24 hours at room temperature, followed by hot curing for 15 hours at 55 °C
Please order Epoxy Resin L 285 separately
Laminate structures for vehicle construction in combination with this product and Epoxy Resin L 285 are approved by the TÜV-Süd.
Laminate structures for vehicle construction in combination with this product are approved by the TÜV-Süd. Process instructions/TÜV-Report (unfortunately only in German)
For further technical data and detailed information on processing, please refer to the comprehensive PDF "Technical Information on System L 285" (to be found in the appendix under "Article Information").
Former brand names: Hexion®, Bakelite®

under request

Reviews

1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Long pinned hinge (12 uds)
1 x	Indoor hinge with servo arm integraded
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Long pinned hinge (6 uds)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	25 mm reinforced hinge
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
2 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Gates hinge
1 x	18 mm reinforced hinge
1 x	Flap hinge (6 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Interface Realflight Simulator
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Slave-cable USB Easy Sim
1 x	Round flex hinge (12 uds)
1 x	Small pinned hinge (6 uds)
1 x	Interface Jack Adapter IKARUS
1 x	ROBART POINT HINGE 4,7mm (5 pcs)
1 x	USB Mini Camera endoscope
1 x	SIMtransmitter 6 Mode 2
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	800TVL CMOS camera for FPV

471.33EUR

39.25EUR

Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g[R1101201]

under request

Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
[R1101201]