Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Epoxy » Epoxy R-G » R1001151

14.50EUR

Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har
[R1001151]

Epoxy Resin L and Hardener L 40 min. (240g) 200g Resina / 40g Hardener br>
The resin system Epoxy Resin L + Hardener L yields superior impregnating and wetting properties towards carbon, glass, aramid and natural fibres.

Low viscosity
Highly transparent
High degree of UV stability
Tack-free curing even of thin layers
Glass transition temperature (Tg) max. 76 °C (post-curing at 60 °C / 15 h)
High static and dynamic strength
Free of nonylphenol and DETA
Processing time: 40 minutes (100 g / 20 °C)
Mixing ratio:
100 : 40 parts by weight resin : hardener
100 : 45 parts by volume resin : hardener
It exhibits a very good price/performance ratio and is suitable for the following processing procedures:
Hand laminating
Vacuum moulding
Press moulding
Expertise for the resin system Epoxy Resin L + Hardener L: this system is not cytotoxic (cell damaging), important for applications in medical purposes.
Mechanical properties (Neat resin after curing)
Flexural test
Flexural strength (DIN EN ISO 178): 111 MPa
Flexural modulus (DIN EN ISO 178): 2.960 MPa
Tensile test
Tensile strength (DIN EN ISO 527): 69 MPa
Elongation at break: 4.7 %
Compression test
Compressive strength (DIN EN ISO 1426): 91 MPa
PoxySystems® is a registered trademark of R&G
General information about the system "Epoxy Resin L" with Hardeners S, L, CL, EPH 500, EPH 161, W 300, GL 1 and GL 2
* Low viscosity, free of solvents and fillers
* Fast impregnation of glass, aramid, carbon and natural fibres
* High static and dynamic strength (GL approval with the Hardeners GL 1 and GL 2 being present

Epoxy Resin L with the corresponding Hardeners S, L, CL, EPH 500, EPH 161, W 300, GL 1 and GL 2 is the most commonly used laminating and adhesive resin in R&G`s delivery programme.

In conjunction with the Hardeners S (15 minutes), L (40 minutes), CL (60 minutes), EPH 500 (60 minutes), EPH 161 (90 minutes), W 300 (300 minutes), GL 1 (30 minutes) and GL 2 (210 minutes), this epoxy resin exhibits similar mechanical properties to those of the laminating systems usual aerospace .Its heat deflection temperature reaches from 60 °C (S, L, EPH 500, W 300), to 80 °C (GL 1 and GL 2, after post-curing), to 95 °C (CL, after post-curing) and finally to 120 °C (EPH 161, after post-curing).

Its low surface tension, good adhesion, and minimal curing shrinkage makes the Epoxy Resin L ideal for bonding wood, metal, foamed polystyrene like Styropor® etc. It can be processed in all of the customary methods, e.g. hand lay-up, pressure and vacuum impregnation, press moulding and filament winding.

few units

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DC24 II Transmitter case insert
35.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Short ball link M3 (6 uds)
2 x	M2,5 5Diam metal ball link V3 (2 pcs)
1 x	Vacuum bag, 1200 mm x 50 m
1 x	1000 ml sealer (DOPE)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	M3 Maxi ball link (2 uds)
1 x	6 mm ball link M3 (10 pcs)
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	Ball link M2,5 (10 pcs)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Ball link M2 (10 pcs)
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Screw-lock connector M2 (2 uds)
1 x	Solvent Plasti Dip 1000 ml
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Covered closure or fairings
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	Ball link M1.6 (6 uds)
2 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Spannlack 1000 ml
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	SUS wire 3m (nylon coated)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Ball link M3 RPA's-UAV's
1 x	Hobbylite Filler, Balsa colour
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Socket head ball link M3 (2 uds)
2 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
2 x	Socket head long ball link M3 (6 uds)
1 x	M2,5 5Diam short black ball link V2 (2 pcs)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Spray YELLOW Inca Lexan 150ml
2 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Cap closure 33/23.5mm (2 uds)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
2 x	Blue metalic ball link M3/3 azul (2 pcs)
1 x	Long ball link M3 (6 uds)
3 x	Joint with bearing M2 22x5,5
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Ball link M3 (10 pcs)
1 x	Stainless steel cable Ø 0.62 mm (10 m)
2 x	Universal Colour Paste deep black 50 g
1 x	Ball link M3 (6 uds)
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	M2,5 Diam metal ball link V3 (2 pcs)
2 x	Plasti Dip Liquid Tape 429 ml black
1 x	M3 Maxi ball link (2 uds)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
2 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Steering arm 16 mm Ø 3 mm
1 x	Release wax 250ml
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
2 x	Painting GHT Lexan Black 150 ml
1 x	Long ball link M2 (6 uds)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Joint with bearing M3 22x5,5
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	Universal Colour Paste deep black 250 g
2 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	M2 5Diam short black ball link V2 (2 pcs)
2 x	Plasti Dip Liquid Tape 429 ml black
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	500 ml sealer (DOPE)
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Steering arm 16 mm Ø 4 mm
1 x	Locking cable tie 4.6x203 (uds)
1 x	Canopy Latch
2 x	M3 Maxi ball link (2 uds)
1 x	M2,5 5Diam black ball link V2 (2 pcs)
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	15 mm reinforced hinge
2 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Long pinned hinge (12 uds)
2 x	18 mm reinforced hinge
2 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Large flex hinge (12 uds)
1 x	Flap hinge (6 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
2 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Small pinned hinge (12 uds)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Micro flex hinge (12 uds)
2 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
2 x	Pin type hinge Al 3,0x50 mm (2 pcs)
2 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	PIX Hawk with accesories
1 x	Towing hook
1 x	Tube Pitot to PIXHAWK
2 x	Digital Air Speed Sensor And Pitot Tube Set
2 x	Fixed launching hook
1 x	Towing hook <3m
2 x	Towing hook
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	ABS tube 16.0x14.0x1000 mm
1 x	aluminium servo arm V1-JR 1,0 inch M2
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Allen wheel collar M3x5
1 x	38x4,5 mm wires output (2 pcs)
1 x	Snap long M2 (10 uds)
1 x	Buy Perforated film 100 cm / 50 m
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Pushrod octagone 4/3 with coupler M3
1 x	Cockpit aluminium closing
1 x	Tip wing protector 30x10 (2 pcs)
1 x	PVC grid straight 290x185x0.32 mm
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Socket head ball link M3 (2 uds)
1 x	11 mm Rubber pads (14 pcs)
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x	Landing gear frontal support 25x32x16
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	Landing gear frontal support 29x26x13,5
1 x	Clip mini fixing for wing (2 pcs)
1 x	Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav
1 x	Press fitting for 0,5 diam. steel cable (10 pcs)
1 x	Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl
1 x	M3 INDUSTRIAL ball link (2 uds)
1 x	Crystal Universal RX 35.040 Ch 64
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs)
1 x	Wing bolts M6 Steel screw Blue (2 pcs)
1 x	Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs)
1 x	Short ball link M1.6 (6 uds)
1 x	Split M1,2x10 (10 pcs)
1 x	Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs)
1 x	Short ball link M2 (6 uds)
1 x	Wing bolts M3 Steel screw blue (2 pcs)
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	PPM Encoder Module
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Partall paste 650 g
1 x	Socket head long ball link M3 (2 uds)
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	Long ball link M1.6 (6 uds)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Electric spoiler 250 mm (2 pcs)
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	Junta humo metalica G35 DLE35
1 x	Small flex hinge (12 uds)
1 x	Giant Scale Muffler D.A. 70
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Spring clamp for tube Ø50 mm
1 x	Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Pushrod octagone 3/2 with coupler M2
1 x	Black 2,4 GHz antenna exit guides (2 pcs)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Pin hinge 34x16 mm (10 uds)
1 x	DSM 10 Dual Switch Mixer
1 x	Transmitter JETI Duplex DS-24 EX Carbon Line Multimode
1 x	JETI transmitter DC-14 II Green Multimode
1 x	Transmitter JETI Duplex DC-24 EX Carbon Line Multimode
1 x	Tow hook for tug
1 x	Pin hinge 26x11 mm (10 uds)
1 x	PPM to Jack link - Tx Red (stereo) DC/DS Tx DUPLEX 2,4EX
1 x	JETI handheld transmitter DS-14 II Red Multimode
1 x	Transmitter JETI Duplex DC-24 EX Carbon Line DARK Orange Multimo

14,916.01EUR