Top » Catalog » Car/Trucks » Electric Car » KAVAN RC » KAV06GRE180O

109.00EUR

GRE-18 RTR Crawler 1:18 Orange
[KAV06GRE180O]

Fully assembled 1/18th scale RC crawler model, including electronics and battery pack. Perfect size for both outdoor and indoor off-road driving.

Enter the scale crawler world with our brand new models GRE-18
Perfect size.
The new range of 1/18th scale RC crawlers brings you the best of both big and small RC cars. From the bigger scale models, it inherits the outdoor ability, so it's good for a walk in nature, or a real expedition, while still having a compact size like its smaller relatives. This means you can pack it into any backpack and have it with you anywhere, anytime. And when the weather doesn't allow being outside, an adventurous course, full of obstacles can be found even in your living room!
Scale look.
Thanks to a cool bodyshell with scale accessories, the GRE-18 models are great to look at. Distinctive paint with transparent windows is complemented by molded bumpers, front grille, snorkel, side mirrors, roll cage and rear light covers. When turned on, the car comes to life by in-built LED lights. They have enough power for you to be able to drive in a dark, which provides an amazing atmosphere and a whole new experience.
For any terrain.
A tough metal frame, together with 4-link suspension system and soft dampers, provides enough ground clearance, angles and articulation for overcoming obstacles of the outdoor driving. Full time 4WD system, closed differentials and soft tires with deep thread will always deliver the traction you need. On the top of that, water-resistant electronics mean, you don't have to worry about any conditions - rain, mud, puddles, or deeper streams - nothing is going to stop you!
Always under control.
A strong motor is effortlessly tamed by reduction gearbox. Digital servo and quality remote control system will give you confidence and precision. The transmitter features a necessary settings for center trims, channel reverses and end point adjustment and thanks to an easy disassembly it won't take any extra space.
Ready for action.
Powerful battery pack with a capacity for up to 45 minutes run time and compact USB charging cable, that can be plugged into any mobile phone charger will keep you going at all times. Any time you find a tempting challenge, you will be ready.

Features
Great scale-looking lexan body shell with distinctive paint and transparent windows
Molded accessories like the front grille, side mirrors, snorkel, roll cage and more
Adjustable bumpers and body mounts
Realistic front and rear lights
Strong metal frame
4-link chassis with great articulation like on full-scale models
Long travel dampers with soft springs
Full-time 4WD system with 104:1 final drive ratio for great low-end torque and control
Locked differentials for excellent crawling performance
Realistic tires with soft rubber and good thread for any terrain, mounted on bead-lock rims
55T brushed motor with upgraded power
Chassis mounted 1Kg 3-wire digital waterproof servo for precise control
Fully waterproof receiver and ESC for any weather conditions
Free AUX port for additional lights, or FPV system
600mAh 7.4V 2S Li-Po battery pack, which lasts up to 45 minutes
Quality 2.4GHz digital radio system featuring digital trims, reverse and end point adjustment EPA
Transmitter can be disassembled to fit even smaller space
Compact USB charging cable
Available option parts

KAV06240071 GRE Aluminum Upgrade Shocks Set
KAV06240072 GRE Steel U-Joint Cross Ball Set
KAV06240074 GRE18 Steel U-Joint Drive Shaft Set
KAV06240079 GRE Optional Brass Wheel Weight - 24g

Technical data
Motor: 050 55T
Servo: 1Kg digital (3-wire)
Battery: 600mAh 7.4 2S Li-Po
Charger: USB 150mA
RTR set includes
Fully assembled GRE-24 vehicle with painted body and battery pack
Transmitter
USB charging cable
Wheel nut wrench
Screwdriver
Binding jumper cable
Spare springs
Instruction manual
Required for operation

4xAAA batteries for the transmitter

Wheelbase [mm] 155
Width [mm] 113
Length [mm] 275
Height [mm] 135
Weight [g] 280
Ground clearance [mm] 34
Wheel diameter [''] 2.2
Drive 4x4
Gear ratio 104:1
Motor type DC
Li-Po [čl.] 2
Chassis type Off-road,Crawler,Hobby

few units

Reviews

Quick Find

Shopping Cart

1 x	Chili Race F3K (aramid nose)
2 x	Bird (Aero-naut)
1 x	X-RAY Micro QR
1 x	PIT (Aero-Naut)
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	ABS tube 2.0x1.0x1000 mm
1 x	METEOR 1.000 mm kit
1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	DYNAMOMETER S-1580
1 x	ABS tube 3.0x2.0x1000 mm
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	ABS tube 10.0x8.0x1000 mm
1 x	Aluminium red ball links M3 V1 (10 pcs)
2 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	X-RAY Micro QR (Fuselage with canopy)
2 x	Cooler motor type 400
1 x	Nitroverdu 500 ml
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Extension 100 cm (Futaba)
2 x	Ion Pro, Canopy (JP Model)
1 x	Round Rod 2,0x1000 mm
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	TMM 1210-3S heli
1 x	1/4 Pilot "Heidi"
1 x	Silicone 0,50 qmm servos wire Graupner(5 m)
1 x	Silicone 0,35 qmm servos wire Futaba (100 m)
1 x	1/10 Pilot "Jack"
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Oracover Verde 2 m
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	USB Mini Camera endoscope
2 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
2 x	Cabel "Y" 30 cm (Futaba)
2 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	CHALLENGER Indoor
1 x	ABS tube 5.0x3.0x1000 mm
1 x	Spray EC Red 400ml
1 x	ABS angle 6,0x6,0x1000 mm
1 x	Brass rod Ø 0.8 mm x 1000 mm
3 x	Oracover CARBON Metalic 1 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Oracover Yellow CUB 2 m
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	Flybar support metal LAMA
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
2 x	X-RAY Micro QR (Rudder)
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Cooler motor type 300
1 x	Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	6,4x1000 mm 2:1 black termoretract tube
1 x	EME 55 cc carburetor WALBRO
1 x	Crystal Universal RX 35.140 Ch 74
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	DUPLEX R6 EX receiver 2,4GHz
1 x	Pulley brass 8/2 (2 pcs)
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Extension silicon 30 cm male (Futaba)
1 x	DC-3 Douglas (DAKOTA) 1800 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Universal Colour Paste white 50 g
1 x	Focke Wulf FW-190A-8 93" (2362 mm)
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Micro clevis 0.8 mm(10 uds)
1 x	Albatros ,spare fuselage (Top Model)
1 x	Spinner 80 mm GFK
1 x	Skyray (RBC Kits)
1 x	3,2x1000 mm 2:1 red termoretract tube
1 x	Battery EMCOTEC LiIon 3000 7.2v
1 x	Reed valve for DA 50-R
1 x	Neck strap JETI DS
1 x	Ply-Span 450x600/13g Blue
2 x	Threaded coupler ALU M2 Ø 4 (2 uds)
2 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
2 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
2 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x	1,2x1000 mm 2:1 black termoretract tube
1 x	Rubber bushing with bracket "B" type (2 pcs)
1 x	Hexagonal Nut M4 (20 pcs)
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 2m
1 x	COPILOT Multiplex
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x	Pulley brass 10/2 (2 pcs)
1 x	Screw-lock connector M2 (2 uds)
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	switch short 3-position DS Tx DUPLEX 2,4EX
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	P-51D "Old Crow" 89" (2260 mm)
1 x	Albatros red/white (Top Model)
1 x	Circlik for shaft 3.2 mm (10 pcs)
1 x	Aluminium servo arm (2 uds)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Chili Race F3K 2 wing servo mounted(carbon biax)
1 x	Extractor piñones 2.3/3.2 mm
2 x	Glases Ace
1 x	Painting GHT Lexan Black 150 ml
1 x	Antenna MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro
1 x	Walbro carburetor for MVVS 26/30/35/40 cc
2 x	Lock nut M3 (10 pcs)
2 x	Glases Nimbus
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	1/6 Pilot "Cindy"
2 x	Glases Nimbus "Black"
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14
1 x	MAMBO 17
1 x	Astra wing Joinner (Top Model)
1 x	Albatros ,spare cockpit (Top Model)
2 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Bidule 170 ARF 3.48 m
1 x	Oracover Yellow CADMIO 2 m
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	Horns set HS-65HB/MG, 5065MG
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Spinner 115 mm GFK
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	EXTRA 330L 35% hardware pack (Precision Aerobatics)
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	Glidder Mü13e (Bergfalke)
1 x	Circlick securite
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	MPX-Dean "T" Adapter
1 x	Ion Pro, Elevator (JP Model)
1 x	ABS angle 2,0x2,0x1000 mm
1 x	Extension silicon 50 cm (Futaba)
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	Ball link M3 (10 pcs)
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	M3 Maxi ball link (2 uds)
1 x	CF tube (L 1000 mm Ø030 mm, Ø26 mm)
1 x	Gear for MICRO BB
1 x	Oracover Black 2 m
1 x	Silicone black 0,5 qmm wire ( 25 m)
1 x	Short ball link M3 (6 uds)
1 x	Ball link M3 (10 pcs, flat ball)
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Propeller Pleg CAM Carbon 16x13
1 x	KIRA 480-43
1 x	Hexagonal Nut M2.5 (10 pcs)
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	Joint with bearing M3 22x5,5
2 x	Adapter SPEED 480 whit axle short
2 x	Pulley brass 14/2 (2 pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Shaft sleeve LAMA
1 x	Cable Cargador FUTABA
1 x	Motor MVVS 5.6/690 GLIDER
1 x	KIRA 500-26 6,7:1
1 x	ABS I Strip 10x5x1000 mm
1 x	Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs)
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	AXI 2826/10 V2
1 x	Gearbox KPG27 5,2:1
2 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Servo FUTABA BLS175 SV
1 x	Long ball link M1.6 (6 uds)
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Carbon blade 230 mm
1 x	Extension silicon 30 cm male (Graupner)
1 x	M2,5 5Diam short black ball link V2 (2 pcs)
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Motor Mega AC 16/25/04
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	KIRA 480-34 5,2:1
1 x	BABY glider drawings (Aero-naut)
1 x	Spinner 159x200 mm GFK
1 x	SERVO DES 806 Pignons
2 x	3 LiPo XH>EH adapter
1 x	Glases Moritz
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Spinner 60 mm White (Kavan)
1 x	Motor Mega AC 22/20/03
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Módulo Bluetooth
1 x	PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX
1 x	UMX™ Whipit™ DLG BNF Basic (E-flite)
2 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
2 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	SOLOFOX 5m Voll-GfK
1 x	SIMtransmitter 6 Mode 2
1 x	LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x	Glases Stratus
1 x	Strip 1,5x1,5x330 mm
1 x	SIG Coverall 1.2x4.5 m
1 x	QUANTUM II 55 Brushless Motor
1 x	AXI 4120/20 V2
2 x	Crystal Universal RX 35.150 Ch 75
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	DUPLEX R7 receiver REX Assist
1 x	ABS tube 4.0x2.0x1000 mm
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	DC Small for MultiLog & UltraLight
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	Battery RX JETI LiIon RB 6200 7.2v
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Gearbox KPG27/28 4,7:1pinion
1 x	58 mm micro servo cover
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs)
1 x	Lock nut aluminium M2 (4 pcs)
1 x	AXI 2826/6 V2
1 x	Extension silicon 75 cm (Graupner)
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	Shaft KPG25 4,2:1
1 x	Green silicone 0,25 qmm wire (50 m)
2 x	Softshell Hispano Aviación
1 x	Glases Aspen
1 x	Extension silicon 10 cm (Graupner)
1 x	Optical RPM Sensor
1 x	1/4 Pilot "Mike"
1 x	SERVO S9177SV HV S-Bus2 Programable
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Spray adhesive AEROFIX 2
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	AXI 2826/12 V2
1 x	Flat washer 3.2 mm (20 pcs)
1 x	2,4x1000 mm 2:1 black termoretract tube
1 x	Threaded coupler M2,5 (10 pcs)
1 x	Soporte metal para servos
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Spinner 50 mm White (Kavan)
1 x	M4xM2,5xL30 nylon clevis and arm (10 uds)
1 x	Round Rod 3,0x1000 mm
1 x	AXI 5345/14 HD V2
1 x	AXI 2826/8 V2 Long
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	DUPLEX 2,4EX Brackets for Transmitter DC/DS
1 x	Extension silicon 50 cm (Graupner)
1 x	Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Glider PIROL
1 x	Crystal Universal RX 35.050 Ch 65
1 x	ABS 500 x 400 x 0,5 mm (white)
1 x	Motor Mega AC 22/35 4S
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	White silicone 0,25 mm² wire (25 m)
1 x	57 mm micro-mini servo cover
1 x	Spinner 55 mm White (Kavan)
1 x	Cap Hispano Aviación
1 x	resin-hardener L-385 H-385 (625 g)
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Canister combo DLE 55 cc
1 x	Selfstart electronic switch
1 x	Black tray 2,4EX DC-16/14/24 black
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs)
1 x	Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x	Pulley brass 4/1,5 (2 pcs)
1 x	Receiver DUPLEX REX 3 A20 2.4 GHz
1 x	Bidule 111 3000 mm
1 x	FUTABA F14 + R168DF + Servo S148
1 x	Blue metalic ball link M2/2 azul (2 pcs)
1 x	Coversion set HIROBO EX/EAGLE elektro
1 x	KIRA 400-34
1 x	resin-hardener package L-385 with hardener H-385 (3.5 Kg)
1 x	5 line servos wire black (1 m)
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Hitec 20 mm servo arm
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Hitec 25 mm servo arm with ball link
1 x	Extension silicon 25 cm (Futaba)
1 x	M3-M4 rubber washer (8 pcs)
2 x	Ion Pro NG electric with flaps GREEN Fluor (JP Model)
1 x	90x60 mm standart servo cover
1 x	Oracover White 10 m
2 x	1,6x1000 mm 2:1 black termoretract tube
1 x	AXI 2814/16 V2 Long
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Servo HITEC HS-7985 High Torque Metal Gear Coreless Servo
1 x	Protective Cover for wires Ø 10 mm 1000 mm
1 x	Motor ST 7-160 B
1 x	Motor DLE 170 cc Twin
1 x	Metal clevis M2 (10 uds)
1 x	1/12 Pilot "Tom"
1 x	Ply-Span 450x600/13g Red
1 x	TrainerCord (master-learner)
1 x	4,8x1000 mm 2:1 black termoretract tube
1 x	Transmitter Stick Ends JETI DS-16/14
1 x	DUPLEX R12 receiver REX Assist
1 x	Cabel "Y" 30 cm (graupner)
1 x	Fiberglass plate 1200x1000x0,2 mm
1 x	KIRA 600-16
1 x	Xoar Electric Beechwood Prop 22x10
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	X-RAY Micro QR (Tail Tube)
1 x	2,4x1000 mm 2:1 red termoretract tube
1 x	Fiberglass plate 620x540x0,3 mm
1 x	Extension silicon 10 cm (Futaba)
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Small kwik link (10 pcs)
1 x	PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
1 x	Blue silicone 0,5 qmm wire (50 m)
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	Tyres 70 mm Xclaibur (2 pcs)
1 x	Gear set HITEC HS-125MG/5125MG
1 x	Pilot "Anthony" (Slimline)
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Extension silicon 100 cm (Futaba)
1 x	Servo HITEC HS-225 BB
1 x	Me-163
1 x	MYLAR film A350 (1000x500 mm)
1 x	SCHARNHORST accessories
1 x	1,6x1000 mm 2:1 red termoretract tube
1 x	Gearbox KPG25- 5,2:1pinion
1 x	Servo HITEC HS-311
1 x	Transmitter Crystal 35 Mc/s Ch 62
1 x	Extension silicon 75 cm (Futaba)
1 x	50 mm aluminium spinner (Kavan)
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	DUPLEX R18 EX 2,4GHz + Rsat2
1 x	Ply-Span 450x600/13g Orange
1 x	Fiberglass plate 350x150x2.5 mm
1 x	1/7 Pilot "Japanese"
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Foam plastic plates (310x210x5 mm)
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x	Ball link M2 (10 pcs)
1 x	Dean "T" - Futaba Adapter
1 x	Servo HITEC HS-5805 MG Digi
1 x	PIX Hawk with accesories
1 x	Oracover Brown 2 m
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Propeller APC 11x7 SF
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	White gelcoat 1 Kg
1 x	MPX screwable clips (5 pcs)
1 x	Para-RC Mix
1 x	Aramid 50 daN 50 m
1 x	Parachute BACKUP X100
3 x	Trike XL motor set (motor+esc+prop)
2 x	Parachute PV6 for F3J
2 x	Wing OXY 0,5 pulgadas2
2 x	Set cintas unión paracaídas 145 cm
2 x	Rescue 1,8m2 / BackPack
1 x	Parachute P4
1 x	Windsock Ozone L - 700 mm
1 x	Paramotor BackPack XXS (without accessories)
1 x	Windsock Ozone L -1200 mm
1 x	Grafas ARF 3.0 m (Top Model)
1 x	SCANNER 46-55 Sport Scale 1:7 ARF
1 x	ASK 21 6.5m + pylona
1 x	EDF Ducted Fan JP Hobby 120mm + 12s Motor 760KV (CW)
1 x	EDF Ducted Fan JP Hobby 90mm + 6s Motor 1750Kv (CW)
1 x	Controller Retract Box ER-200 V2

34,123.97EUR