24.00EUR

Servo GO-1017MG 4.5 kg.cm 0.10s/60º
[KAV201017MG]


High torque and high speed programmable digital micro servo 17g with titanium gears and wide input voltage range (4.8-8.4V), 2xBB, ideal for ailerons and flaps of gliders, hotliners and smaller motor models. Torque 3.0kg.cm, speed 0.150s/60° at 4.8V, torque 3.8kg.cm, speed 0.130s/60° at 6.0V, torque 4.2kg.cm, speed 0.110s/60° at 7.4V, torque 4.5kg.cm, speed 0.100s/60° at 8.4V. Servo case with an aluminum middle part for perfect cooling under high load. Dimensions 222.8x12x19.4mm, weight 17g.
High torque and high speed programmable digital micro servo with titanium gears and twin ballraced output shaft for use in RC models of all types. The flat 12 mm servo case makes it particularly suitable for controlling ailerons and flaps in RC highh speed glider models/hotliners with thinner wing profiles. An aluminium mid case for perfect cooling even under high loads.
Using the KAVAN USB programmer/interface for GO servos and the PC operator program you can program a wide range of servo parameters (servo end-points, servo reverse and neutral position, overload protection, soft start, fail-safe, etc.).
Programmable functions
Servo angle: Used to set the maximum travel of the servo. Default setting is approx.
120° at normal control pulse width range (900~2100 µs); approx. 180° at maximum allowed control pulse width range (500~2500 µs).
Servo Neutral: Used to set the neutral (center) position of the servo.
Damping Factor: Sets the servo's stopping behavior characteristic.
PWM Power: Sets the output power of the servo. As higher the value is, the faster the servo is and the more thrust it has - of course, the current draw will be proportionally higher. Range: 39.2~100%
Sensitivity: Adjusts the sensitivity (insensitivity bandwidth) of the servo. The higher the value - the narrower the insensitivity bandwidth - the servo will only move if the change in control signal width is greater than the insensitivity bandwidth. Setting the sensitivity value too high can cause the servo to oscillate in some applications. Range: Ultra High (Extra High - sensitivity bandwidth approx. 1 µs) - High (High - approx. 2 µs) - Medium (Medium - approx. 3 µs) - Low (Low - approx. 4 µs)
Soft start: Enables/disables the soft start function. This function prevents the servo from abruptly moving into the operating position after power is turned on, thus reducing the risk of damage to the servo gears.
Reverse: Reverses the sense of servo movement.
FUTABA SR mode: Used only with FUTABA RC system working in SR mode. Do not turn this option on if you are using a different FUTABA RC system setting or any other brand of RC system.
SANWA SSR mode: Used only with SANWA RC system working in SSR mode. Do not turn this option on if you are using a different SANWA RC system setting or any other brand of RC system.
Fail-safe: If the control signal from the receiver is completely lost or if the servo cannot detect the signal properly (e.g. due to interference), the servo may enter one of three fail-safe modes:
(a) Free: Fail-safe is disabled.
(b) Maintain Position: the servo maintains the position corresponding to the last correctly received signal.
(c) Transition to neutral: The servo returns to the neutral (1500 µs pulse width) position.
Overload protection: enables or disables servo overload protection in three levels - once the overload has lasted for a preset time (in seconds), the servo output power is limited to the corresponding preset value (in % of max power).
Reset: Restores the connected servo to its factory default settings.
Wide input voltage range 4.8-7.4 V (nominal).
4.94 mm output shaft with 25 teeth.

Servo dimensions Micro
Servo type Digital
Thrust at 4.8V [kg∙cm] 3
Thrust at 6.0V [kg∙cm] 3.8
Thrust at 7.4V [kg∙cm] 4.2
Thrust at 8.4V [kg∙cm] 4.5
Speed at 4.8V [s/60st.] 0.15
Speed at 6.0V [s/60st.] 0.13
Speed at 7.4V [s/60st.] 0.11
Speed at 8.4V [s/60st.] 0.1
Servo gears Metal
Ball bearings 2×
High-voltage Yes
Power supply [V] 4.8 - 8.4
Length [mm] 2.8
Width [mm] 12
Height [mm] 29.4
Weight [g] 17
Intended for Aeroplanes,Helicopters,On-road cars,Boats


temporalmente fuera de stock
temporalmente fuera de stock

Comentarios
Categorías
* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
  3D IMPRESION
  Actuadores
  Adaptadores->
  Altimetros->
  Amperímetros
  Anemómetros
  Auto-Pilot
  Banco pruebas
  Baterías->
  Bayonetas
  BEC/Cables/Conector/
Interrup

  Bisagras
  Cables
  Cajas de vuelo
  Camaras->
  Cargadores->
  Catalogos
  Catapultas/Bungees
  Centralitas/Registro de Datos->
  Cintas/Cierres/Bridas
  Combustible->
  Conectores
  Conos/Muletas->
  Emisoras/ Radios/Receptores->
  Extintores
  Extractores piñones
  Ferritas
  Fibra/Carbono/Planchas/Malla/ABS
  Fundas
  Gafas
  Hardware
  Helices->
  Herramientas
  Horns mando
  Humo/Cohetería/Pirotecnia
  Instrumentos/ Paneles
  Linkages/Clevis
  Luces/Iluminacion->
  Maderas/ Listones
  Merchandising
  Pegamentos/Resinas/Epoxy->
  Pegatinas
  Perfiles
  Pilotos
  Prolongadores
  Recubrimientos/Termorretráctil
  Reguladores / Variadores->
  Remolque
  Rótulas
  Ruedas/Ejes->
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    Mikado
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronicos
  Simuladores
  Soportes/CG/Incidenc.
  Sprays/Pinturas/Barnices/Pastas
  Tornilleria
  Trenes de aterrizaje->
  Tubo Carbono/Latón/Acero/Alu
  Varilla Acero/Latón/Alum
  Varilla carbono
  Varillas-Listones ABS
Coches / Trucks->
Motores y Turbinas->
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Gorra Hispano Aviación
1 x Paracaidas BACKUP X100
1 x Vela OXY 5.0 m2
1 x Paracaidas rescate "RC-Evo-Cross"
1 x Chaqueta Hispano Aviación
2 x Para-RC Trike "RC-Bullix"
1 x Portaequipajes BIG-MALIBU XL 285x90x44 cm Gris
1 x VBar NEO
1 x Helice APC 10x5.5 MR Electric multirrotor PUSHER
1 x Vela OXY 0,5 pulgadas2
1 x Encendido DA-35 (sin sensor)
2 x Motor DLE 430 cc - Paramotores
1 x Mochila OPALE paramodels
1 x HDT Jet Central
1 x Piloto LUCAS ARTF
1 x Manga viento Ozone S - 700 mm
1 x Corona pequeña autoarranque DLE-170M
1 x Corona grade autoarranque DLE-170M
1 x Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
1 x Helice APC 10x5.5 MR Electric multirrotor
1 x Polo Hispano Aviación
1 x Paramotor Trike XL
1 x Set cintas unión paracaídas 145 cm
1 x Inversor de servo
1 x Paramotor BackPack XXS (sin accesorios)
1 x Junta carburador DLE 111 (V1)
1 x Para-RC Mix
1 x Aramid 50 daN 50 m
1 x Motorización Trike XL (motor+regulador+helice)
1 x Cinta carbono TeXtreme 38 g/m2 IM UD 20mm x 100 m
1 x Motor B50-10L Competition + 6,7:1
1 x Chaleco Hispano Aviación
1 x Me-163
1 x Motor DLE 200cc Premium Muffler
1 x Parte central del cíclico LA500
1 x Rodamiento 4/14/4 (5 pcs)
1 x Palas LA500
1 x Rodamiento one-way LA500
1 x Housing-lower del cíclico LA500
1 x Housing-upper del cíclico LA500
1 x Palanca del cíclico LA500
1 x Piñon motor rotor LA-500
1 x Motor rotor LA-500
1 x Carena delantera LA500
1 x Piloto LA 500
1 x Soporte del rodamiento frontal LA500
1 x Helice XOAR 21x10 Electrica
1 x Funda Protectora cables Ø 20 mm 1000 mm
1 x Funda Protectora cables Ø 15 mm 1000 mm
1 x Cámara Sony 4140+673 CCD Board con emisor 5,8 GHz 200mw + antena
1 x Helice XOAR 16x7 Electrica
1 x Prolongador Futaba macho 40 cm de silicona
1 x Funda Protectora cables abierta Ø 13 mm 1000 mm
1 x Funda anticalorica de fibra de vidrio Ø 4 mm 1000 mm
1 x Conexion PREMIUM fuselaje/alas para dos servos MPX 120/40 cm
1 x Camara USB micro endoscopica
1 x Prolongador silicona 50 cm (Futaba)
1 x Prolongador S-Bus 1-2 silicona 30 cm
1 x Funda anticalorica de fibra de vidrio Ø 6 mm 1000 mm
1 x Silent-blocks DLE 170M
1 x Cable servo 5 lineas negro (1m)
1 x Prolongador 15 cm (Futaba)
1 x Cable servo PREMIUM 100m (blanco/rojo/azul)
1 x Prolongador cable servo 0,14 PVC, conector ZH micro
1 x Cable silicona hembra batt. receptor 30 cm (Futaba)
1 x Cable "Y" 15 cm
1 x Conexion PREMIUM fuselaje/alas 120/40 cm one4one
1 x Extension silicona 30 cm hembra (Futaba)
1 x Cable S.BUS 3 salidas 300 mm
1 x Helice XOAR 15x8 Electrica
1 x Prolongador 100 cm (Futaba)
1 x Prolongador servo 20 cm HITEC/JR
1 x Prolongador 90 cm (Futaba)
1 x Prolongador silicona 100 cm (Futaba)
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x DJI FPV Combo
1 x Prolongador Futaba hembra 40 cm de silicona
1 x Prolongador JR/Graupner hembra 40 cm de silicona
1 x Extension silicona 30 cm macho (Futaba)
1 x Cable silicona 0,25 mm² negro (25 m)
1 x Funda Protectora cables Ø 10 mm 1000 mm
1 x Conexion PREMIUM MAXI fuselaje/alas para 2 servos MPX 200cm
1 x Cable silicona 0,25 mm2 verde (100 m)
1 x Prolongador 7.5 cm
1 x Cable silicona 1,0 mm2 negro (50 m)
1 x Extension silicona 30 cm macho (Graupner)
1 x Cable PVC 2 x 0.25 mm2 (5 m) rojo-negro
1 x Prolongador silicona 100 cm (Graupner)
1 x Funda Protectora cables abierta Ø 6 mm 1000 mm
1 x Cable servo JR silicona 0,35 mm2 / 5m
1 x Prolongador cable servo POWERBOX 100cm
1 x Soporte para cables S 6 mm (10 pcs)
1 x Cable TS832 a Gopro AV/Power
1 x Extension MPX-MPX 20 cm
1 x Prolongador servo 15cm MULTIPLEX
1 x Cable silicona 0,25 mm² verde (25 m)
1 x Helice FALCON 32,5x11 PUSHER Carbono
1 x Circlick seguridad
1 x Cable servo PREMIUM 1 m (blanco/rojo/azul)
1 x Extension silicona 35 cm macho (Futaba)
1 x Bancada servo gancho
1 x Racor 2/3 mm
1 x Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey)
22,109.52EUR
Fabricantes
Información del Fabricante
Kavan
Otros productos
Idiomas
Español English
Monedas