1 x | Ball link M3 (6 uds) |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | JETImodel SINGLE BEC |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | Socket head ball link M3 (2 uds) |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | Socket head long ball link M3 (6 uds) |
1 x | Long ball link M2 (6 uds) |
1 x | UBEC 6A KAVAN |
1 x | ABS tube 5.0x4.0x1000 mm |
3 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
2 x | 30 cm BEC cable (female) |
2 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | 3 LiPo XH>EH adapter |
1 x | ABS tube 4.0x2.0x1000 mm |
2 x | ABS tube 6.0x4.0x1000 mm |
2 x | ABS tube 9.0x8.0x1000 mm |
2 x | ABS tube 8.0x7.0x1000 mm |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Softshell Hispano Aviación |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Joint with bearing M2,5 22x5,5 |
1 x | Dean "T" - Futaba Adapter |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Cap Hispano Aviación |
2 x | 6 mm ball link M3 (10 pcs) |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Ball link M1.6 (6 uds) |
2 x | CC 02 |
2 x | ABS tube 5.0x3.0x1000 mm |
1 x | Long ball link M3 (6 uds) |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Xplorer3 anemometro |
2 x | USB interface ALTIS |
3 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Servo M2x9/16 screw (4 pcs) |
1 x | Spray Graphit 33 |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Spannlack 1000 ml |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Ball Link Plier |
2 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Micro Switch button |
1 x | Extension 5 lipos JST/C - JST |
2 x | ABS angle 2,0x2,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
2 x | Opto Gas Engine Kill Switch |
2 x | AX-60 starters (5 pcs) |
2 x | Extension 2/3 lipos JST - JST/C |
1 x | Red smoke canister 65 g |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Long ball link M1.6 (6 uds) |
1 x | MAX BEC 2 |
2 x | Crystal TX 35.150 Ch 75 |
2 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Xplorer4 anemometro |
1 x | Glases Nimbus |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
2 x | ABS tube 6.0x5.0x1000 mm |
1 x | Small Crow DLE-170M |
3 x | ABS tube 12.0x10.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
2 x | Electric spoiler 250 mm (2 pcs) |
2 x | White smoke canister 100 g |
3 x | White smoke bombs AX-60 (5 pcs) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
2 x | A/C quality beech plywood 600x300x0.8 mm |
4 x | L-Connector 4.0 mm x 1000 mm |
4 x | SPS 70V 100/200 A |
2 x | T-Hose connector 3-3-3 mm |
1 x | Receiver Crystal 35 Mc/s Ch 62 |
1 x | Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi |
2 x | 500 ml sealer (DOPE) |
2 x | Squared carbon wing joinner 5x5x220 mm |
1 x | U Profile ABS 2,0x4,0x1000 mm |
2 x | P 17×5.8 Prop-2PCS/PAIR |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
2 x | ABS angle 3,0x3,0x1000 mm |
2 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Ball link M3 (10 pcs) |
1 x | Crystal TX 35.010 Ch 61 |
1 x | Race Outboard MERCURY type A |
3 x | Crystal TX 35.180 Ch 78 |
1 x | Jeti Black cap |
2 x | PSC 5 |
1 x | Cockpit plastic closing |
2 x | Canopy Sweet / Siesta |
1 x | XPower XC3522/5 LS |
2 x | Electric spoiler 185 mm (2 pcs) |
1 x | DUPLEX R7 receiver nano 2,4 GHz |
1 x | Jet Afterburner Simulator NF-Jet3 RY |
1 x | Fuel tank fiberglass Easy Jet 2,2 l |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
3 x | L-Connector 1.5 mm x 1000 mm |
1 x | SWTU2 switch |
2 x | NF-3 RC set |
1 x | Servo TOPMODEL DS9010 T |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | NF-3X-80 liner Kit |
1 x | Oil FUCHS 1 liter |
1 x | A/C quality beech plywood 498x247x1.2 mm |
1 x | DUPLEX Satellite receiver Rsat 900 |
1 x | Short ball link M3 (6 uds) |
4 x | Crystal TX 35.050 Ch 65 |
2 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
1 x | Crystal Universal RX 35.030 Ch 63 |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Joint with bearing M3 22x5,5 |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | BEC 3A FOXY |
1 x | Quick hose connector 6-4 mm |
2 x | Cooler motor type 300 |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Aluminium wide washer M3 red (4 pcs) |
2 x | Fuel Fittings-Red |
1 x | 550 cc gasoline fuel tank complet |
1 x | Spinner Alumin. fixed propeller 40 mm / 5,0 mm |
2 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
2 x | SBEC 40 |
2 x | ABS angle 6,0x6,0x1000 mm |
2 x | SBEC Jeti |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
2 x | Jet Afterburner Simulator NF-Jet4 RY |
2 x | Gates hinge 30x16 mm (2 pcs) |
3 x | Transmitter Crystal 35 Mc/s Ch 77 |
2 x | USB HLS prog. interface |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | SIMtransmitter 6 Mode 2 |
2 x | LED blink wire flashing (blue - 2pcs) |
2 x | Lock washer 3.2 mm (20 pcs) |
1 x | Crystal Universal RX 35.170 Ch 77 |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
2 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | 25 mm Sandpaper file |
1 x | Hopper 125 ml INTAIRCO |
2 x | Jet Afterburner Simulator NF-Jet3 RYS |
1 x | "S" set for boats |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
2 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | 2 LiPo XH>EH adapter |
2 x | |
1 x | Fuel Dot (Silver) |
2 x | Threaded coupler M3 (10 uds) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Crystal RX 35.120 Ch 72 |
2 x | Spring lock washer 2.6 mm (20 pcs) |
2 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
1 x | MPS Gas-Cap-Powerswitch |
3 x | ABS tube 7.0x6.0x1000 mm |
1 x | KIRA 480-34 5,2:1 |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | CM-3 |
2 x | Xplorer2 anemometro |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
2 x | Servo holder for retract |
1 x | Spinner NUT 1/4x28 |
2 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Single rim type C3 36/33,5/18,5 mm (pneumatics 55-70 mm) |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
2 x | Canopy Astra |
1 x | Fox MDM 1 4000 mm DeLuxe |
3 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | KIRA 600-30 6,7:1 |
1 x | Canopy Latch |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
2 x | ABS rectangular profile 12x6.0x1000 mm |
2 x | Green smoke canister 65 g |
1 x | Xplorer1 anemometro |
1 x | HBC 10035-3 32-Bit |
1 x | Motor OS 3820-1200 electric |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | 33,0 mm propeller (left propeller) |
2 x | 20 g tin paste |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | KIRA 600-20 6,7:1 |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,2 mm |
1 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
2 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
2 x | Propeller VESS 32A |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Hexagonal Nut M4 (10 pcs) |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | CC 03 |
1 x | Blind nut M6 (4 pcs) |
2 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | LED wire (rojo - 2pcs) |
1 x | Motor mount class 48" |
1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Quicklock washer 3.5 mm (10 pcs) |
2 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | 500 ccm complete gasoline fuel tank |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Pulley brass 16/2 (2 pcs) |
1 x | Glases Stratus |
2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
2 x | Small kwik link (10 pcs) |
1 x | Pull-Pull complet set with CF rudder double servo arm |
2 x | Esc MasterSPIN 80 Pro |
1 x | FuelTank Cap (red) |
2 x | Rubber profile 6-2 mm 2M |
1 x | DUPLEX MUI 50 Sensor |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
1 x | NF-3XL set |
1 x | AddCAP 10AS capacitors |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
2 x | BALSA trip 5.0x5.0x1000 mm |
1 x | MPX-Dean "T" Adapter |
1 x | TopFuel LiPo 35C-ECO-X 2400mAh 2S MTAG |
1 x | Swift 5050 mm (Airwold) |
1 x | Micro clevis (10 uds) |
1 x | Swing 1000 |
1 x | Vertical mounting servo holder |
1 x | DUPLEX USB Adapter |
1 x | Fox 4000 mm with flaps (Airwold) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Motor Typhoon 700-68 1680 Kv |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | Motor OS 50 SX-Hyper |
1 x | LED lighting system High Power |
1 x | Propeller Pleg CAM Carbon 15x13 |
1 x | 55% silver electrodes (2 pcs) |
2 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | Foam air filter Ø 48 mm, blue |
1 x | Multi-adapter balancer JST - TP |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | 13 mm wing servo holder |
1 x | SERVO DES 707 BB MG, Pignons |
1 x | Spinner NUT M5 |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | "L" servo arm 65x49 mm (2 pcs) |
2 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
2 x | Esc MasterSPIN 99 Pro OPTO |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | Engine Kolm BX-155-2 with starter |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
2 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Propeller Pleg CAM Carbon 14x9 |
2 x | Long Switch On/Off micro |
1 x | Glases Aspen |
1 x | Cut tube |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Dremel 3000 130W |
1 x | TopFuel LiPo 20C-ECO-X 5000mAh 6S |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Extension Arm for Carburetor (red) |
1 x | Motor ORBIT 20-12 with coolingfan |
2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
2 x | Servo MKS HV6130 |
1 x | "M" set |
1 x | 3-blades 29x12 carbon prop Super Silence |
1 x | 300 Newtons FEMA absorber |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Pump 12 V |
2 x | ESC ALPHA 60A HV |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right hydropropeller) |
1 x | OS Engine 105HZ-R Heli with pipe 105 |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Brushless ESC 30A F-450 |
1 x | 55 mm aluminium spinner (Kavan) |
1 x | Lock washer 4.3 mm (20 pcs) |
2 x | ABS tube 16.0x14.0x1000 mm |
1 x | 8Wx2 Gears-Spotlight, UltraPower, 20mm White |
1 x | Optotronix Aurora Plug |
1 x | Propeller POWER-PROP 7x7 |
2 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
1 x | Carbon blade 230 mm |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
2 x | Macchi MC72 50E RED/GOLD |
1 x | 17x8 BIELA propeller |
1 x | FESTO Filter 4 mm |
1 x | FESTO connector M5 Quick 6 mm |
1 x | 18x10 BIELA pusher propeller |
2 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | 15 mm floating pad (30 pcs) |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Porta Kwik link M4 4 mm (2 pcs) |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | 102x26 Ø6.0 mm aluminium core wheel |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | 21x12D BIELA propeller (3-blades) |
1 x | Pendulum glow tank |
1 x | MAX BEC |
2 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | 64x20 mm (2.5") Type jets aluminium core wheel |
1 x | Swashplate metal LAMA |
1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | BULLIT Wing 1095 mm |
1 x | Gold antispark 5,5 mm plug |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/ |
1 x | L ELBOW 90º ø 25 mm |
1 x | Connectors MPX 8 pins with support (black) 1 pair (male-female) |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | Silent-blocks DLE 170M |
1 x | Initior Receiver FRX2 Wireless |
1 x | Coversion set HIROBO EX/EAGLE elektro |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Parachute expulsion foam |
1 x | LED blink wire flashing (red - 2pcs) |
1 x | NF-1 RC set |
1 x | Swift S1 De-luxe 3.140 mm |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Wheel 28 mm |
1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Beech dowels 3.0 x 1000 mm |
3 x | ABS tube 14.0x10.0x1000 mm |
1 x | HITEC 17 mm servo arm with ball link HITEC |
1 x | Regulador NAVY 540R |
2 x | Covered closure or fairings |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Alu servo arm double RHINO |
1 x | Crystal Universal RX 35.020 Ch 62 |
2 x | Motor holder for AC 28/7 |
1 x | 14 mm Portholes for screws (10 pcs) |
1 x | ASK 21 6.5m + pylona |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
1 x | 270 mm 3/3 mm shaft ship |
1 x | Fox MDM 1 4000 mm DeLuxe,cabina |
2 x | ABS Strip 1.5x4.0x1000 mm |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | Glass Bubbles (0,12 g) 350 ml |
2 x | Motor A2212/13T |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Albatros red/white (Top Model) |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Glider KNIRPS |
1 x | White smoke canister 65 g |
1 x | Receiver DUPLEX R3L EX 2.4 GHz |
1 x | MIG AC 400 /14 |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Bronze bearings Ø 4 x Ø 8 x 8 mm |
1 x | Metal clevis M2 (10 uds) |
2 x | Tip wing protector 30x10 (2 pcs) |
1 x | Motor DLE 430 cc - Paramotors |
2 x | Yellow smoke canister 65 g |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | Propeller hub EME 60cc |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
1 x | Motor EME 35 cc with electric starter |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | Indoor Brushed motor kit |
1 x | Propeller Pleg CAM Carbon 12x9 |
1 x | Crystal Universal RX 35.070 Ch 67 |
1 x | TrainerCord (master-learner) |
1 x | Blue smoke canister 140 g |
2 x | Profile ABS Square 3 x 1000 mm |
1 x | PHASOR RACE 2035/4100 1D |
1 x | Extension 5 lipos JST/C |
1 x | Propeller Pleg CAM Carbon 12.5x7.5 |
1 x | Plastic wheels 30 mm (2 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Motor OS 81 FS 4T |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Motor DLE 200cc Std |
1 x | Servo TOPMODEL S7520 MG |
1 x | LiPo Storage Box Standard 1 Type 1 |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | 16x8 BIELA propeller (4-blades) Corsair Scale |
1 x | L-shaped servo mount |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | MPX PCB "Gender-Changer (5 pcs) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
1 x | DUPLEX 2.4GHz GPS |
1 x | Ventus 1:4 set of instruments |
1 x | Small aluminium horn gold (2pcs) |
1 x | Propeller Pleg CAM Carbon 13x5 |
1 x | Towing hook |
1 x | Hitec 38 mm servo arm with ball link |
1 x | Coupling for 6 mm axis |
1 x | 44.5x17 mm (1.75") Type jets aluminium core wheel |
1 x | Blind nut M6 (4 pcs) |
1 x | 8Wx2 Navigation & Strobe, 11mm Red/White |
1 x | Motor EME 70 cc |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Conector JR Servo male (10 pcs) |
2 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Fuel Fittings-Gold |
1 x | Esc MasterSPIN 70 Pro OPTO |
1 x | Jet Afterburner Simulator NF-Jet1RY Set |
1 x | Propeller RABOESCH M5 60 mm (4 Blades) (Right hydropropeller) |
1 x | Bidule 111 3000 mm Canopy |
1 x | Propeller RF CFK 14.5x14 |
2 x | |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Kardan Black (without pinions) |
2 x | BABY glider drawings (Aero-naut) |
1 x | Parachutist |
2 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Male Prolonger TP 4/5S |
1 x | Ball Link Plier |
1 x | Flap hinge (6 pcs) |
1 x | Pitts Mufflers EME 70 cc (2 pcs) |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
2 x | PSC 6 |
1 x | SPS 70V 140/280 A |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Vess propeller 11x7 S |
1 x | Sensor DUPLEX 2.4EX MUI 200 MULi 6S for measuring voltage on LiX |
1 x | Conector JR Servo female (10 pcs) |
1 x | MRPM-AC revolution sensor |
1 x | Piston ring EME 35cc |
2 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | Propeller RABOESCH M5 0 mm (4 Blades) (Right hydropropeller) |
1 x | Motor Typhoon 6/20 |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
1 x | LED blink wire flashing (orange - 2pcs) |
1 x | Connector Sub-D 2+5 Female |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | Antenna Hole Cap V1 (Silver) |
1 x | JIVE 80+HV Esc |
1 x | Propeller CFK 13x7.5 |
1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
1 x | Extension 6 lipos XH > EH |
1 x | LED wire (green - 2pcs) |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Extension 2/3 lipos JST/C |
1 x | Motor OS 55 AX |
1 x | Screw M2x6 (10 pcs) |
1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
1 x | Futaba 38 mm servo arm |
1 x | Motor EME 60 cc |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Gas or Kerosene Refueling Dry-Break Ports w/Return Line |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Right hydropropeller) |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Landing gear Rocket 400 |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Sliding window 1:2,4 / 1.2,6 Scale |
1 x | TopFuel LiPo 20C-ECO-X 5800mAh 4S |
2 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
1 x | Set freno para ruedas Dia. 127 mm |
2 x | Cooler motor type 400 |
1 x | Fuel dot blue |
1 x | Motor HP 220/30/A3 P4 5:1 |
1 x | PBY 6/6A Catalina (aero-naut) |
1 x | Pulley brass 8/2 (2 pcs) |
1 x | Micro Crystal RX 35.170 Ch 77 |
1 x | SHK 4000 mm Scale 1:4.25 |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | DUPLEX 2.4EX MT 125 temperature sensor |
1 x | Propeller CFK 14x8 Slim |
1 x | Spinner propeller pleg. 30 mm / 5,0 mm |
1 x | Surprise XII Rudder (Freudenthaler) |
1 x | Cooler motor type 150 |
1 x | Nitroverdu 500 ml |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Left hydropropeller) |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Propeller Pleg CAM Carbon 12x5 |
1 x | Ball link M3 RPA's-UAV's |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | PYRO 700-45 Long Axi |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | 23x8 BIELA propeller |
1 x | Cylinder-piston Assembly 30cc |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Propeller Pleg CAM Carbon 10x7 |
1 x | Motor DLE 170 M- Paramotors |
2 x | Profile ABS Square 1 x 1000 mm |
1 x | Aluminum Fold Prop Spinner 40 mm / 5mm |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Propeller Pleg CAM Carbon 16x13 |
1 x | Mini-Pix Esc 15 Amp |
2 x | Connector CAN 15 |
2 x | 3-blades 16x10 carbon prop Super Silence |
1 x | EC-Cutter |
1 x | Pulley 10x16 mm (5 pcs) |
1 x | 8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White |
2 x | Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm |
1 x | 22x10 prop Super Silence |
1 x | Ø 0,5 mm Pull-Pull Kevlar Line (3 m) |
1 x | Hitec 25 mm servo arm with M3 ball link |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Propeller Pleg CAM Carbon 15x6 |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | TopFuel LiPo 20C-ECO-X 5800mAh 6S |
1 x | 26x8 BIELA propeller |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
2 x | Electronic switch JETI SP6 0-15v/6A |
1 x | ACTIVE ARF Electric 1.995 mm |
2 x | Short Switch On/Off micro |
1 x | Spinner propeller pleg. 45 mm / 6,0 mm |
1 x | Green smoke canister 140 g |
2 x | Metal ball clevis M3 (10 uds) |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | Black large kwik link (10 pcs) |
1 x | 24x10 BIELA Sport 3Bl propeller (3-blades) |
1 x | DUPLEX R7 receiver 2,4GHz |
1 x | Propeller Pleg CAM Carbon 13x6.5 |
1 x | JIVE 120+HV Esc |
1 x | Propeller Pleg CAM Carbon 12x8 |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Propeller Pleg CAM Carbon 12.5x6 |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Rubber boat defense |
2 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Truck-trailer for gliders 720 x 239 mm |
2 x | 10 mm portholes (10 pcs) |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | PPS-4D Propeller |
1 x | Beech dowels 2.0 x 1000 mm |
2 x | Digital precision scale up to 2000 g |
1 x | LiPo Storage Box Type "BIG" |
1 x | Pan Head Screw M2x8 PH countersunk head |
1 x | 50x45 mm micro-mini servo cover |
1 x | Propeller Pleg CAM Carbon 10x8 |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 72 mm |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Propeller Pleg CAM Carbon 15x10 |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | FesEx-Uni6 System |
1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
1 x | Blind nut M4 (4 pcs) |
1 x | Spinner propeller pleg. 30 mm/6,0 mm/0º |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Propeller RF CFK 16x8,5 S |
1 x | XH female balance (4S) connector (2 pcs) |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Pulley brass 12/2 (2 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Gas combustible tube |
1 x | Cable coupler M2 (10 uds) |
1 x | Connectors MPX black female |
1 x | Multi-adapter balancer JST/C - TP |
1 x | 18x8 BIELA propeller |
2 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | TMM 1210-3S heli |
1 x | Sanyo RX Battery Eneloop 4,8 V JR |
1 x | Universal Filter |
2 x | PCARD Wireless System |
1 x | Propeller CFK 14.5x10 Slim |
1 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | XPower XC4226/12 LS |
1 x | Pulley brass 10/2 (2 pcs) |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Propeller Pleg CAM Carbon 11x8 |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | Prolonguer for Balancer Thunder Power 6S |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Screw-lock connector M2 (2 uds) |
1 x | 2,5x60 mm allen screwdriver |
1 x | 28x12 prop Super Silence |
1 x | Sanyo RX Battery Eneloop 4,8 V JR |
1 x | Micro Crystal RX 35.100 Ch 70 |
1 x | 30x14 prop Super Silence |
1 x | 45 mm flag mast |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Spinner propeller pleg. 40 mm / 6,0 mm |
2 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | Servos security connector (2 pcs) |
1 x | Tube bender |
1 x | ABS Strip 1.5x6.0x1000 mm |
2 x | Locking cable tie 4.6x203 (uds) |
1 x | Spinner NUT M8x1,25 |
2 x | Interruptor RX/Batterie |
1 x | Esc MasterBasic 40SB |
1 x | 29x20D BIELA propeller |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Turnbuckle M1,6x17/27 (2pcs) |
1 x | 16x10 BIELA propeller (3-blades) |
1 x | Precision wrench L100 mm |
1 x | Rocket D3-P |
1 x | 3-blades 27x12 carbon prop Super Silence |
1 x | Plasti Dip Liquid Tape 429 ml orange |
1 x | Motor mount EDGE 540 48" |
1 x | 14 mm portholes (10 pcs) |
1 x | XH male balance (6S) connector (2 pcs) |
1 x | NF-2 RC set |
1 x | 90x75 mm standart servo cover |
1 x | Coupling for 3,2 mm axis |
1 x | Propeller RABOESCH M4 60 mm (5 Blades) (Right hydropropeller) |
1 x | Ion Pro NG electric with flaps ORANGE (JP Model) |
1 x | Propeller Pleg CAM Carbon 10x7 Reverse Rotation |
1 x | 8Wx2 Navigation & Strobe, 11mm Green/White |
1 x | KIRA 480-43 |
1 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | Servo slow down unit (0,7-14,7 sec ) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Field folding model stand SebArt |
1 x | Propeller Pleg CAM Carbon 9x5 |
1 x | Schul-Malpinsel Gr.5 |
1 x | Anchor of tow Met. 60 mm |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | DYMOND VTX UBS Programming adapter |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Micro Crystal RX 35.090 Ch 69 |
1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Right hydropropeller) |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Extension silicon 25 cm (Futaba) |
1 x | Round Rod 1,25x1000 mm |
1 x | XH female balance (6S) connector (2 pcs) |
1 x | Turnbuckle M2,5x32/48 (2pcs) |
1 x | Profile ABS half cane 3x1000 mm |
1 x | 250 mm / 16 mm Airbrakes |
1 x | MIG 29 3D RTF, Servo |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | Propeller CFK 17x18 |
1 x | Extinguisher CO2 - 2 Kg |
1 x | Rangefinder 20x49 mm (2 pcs) |
1 x | Cable coupler M2x66 (2 uds) |
1 x | LED wire (blue - 2pcs) |
1 x | CC 05 |
1 x | Propeller balancer |
1 x | 3l Smoke oil |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | PERMAGRIT Sanding Block 45° 140x51 mm |
1 x | Propeller RABOESCH M5 80 mm (4 Blades) (Left hydropropeller) |
1 x | White Thread 0.50 mm x 20m |
1 x | Blind nut M5 (10 pcs) |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | KOBY 70 LV Esc |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | Rangefinder 39x20 mm (2 pcs) |
1 x | Ion Pro NG electric with flaps RED Fluor (JP Model) |
1 x | Bob airtrap set |
1 x | Tube mounting clips (5 pcs) |
1 x | Superlight deluxe wheel 45 mm (2 pcs) |
2 x | 1/12 Pilot "Tom" |
2 x | 1/6 Pilot "Tony" |
2 x | Pilot "Anthony" (Slimline) |
2 x | Pilot "Dick" Legends Series (Slimline) |
1 x | 1/12 Pilot "Langley" |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | 1/6 Pilot "Cindy" |
1 x | 1/4 Pilot "Mike" |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | 1/12 Pilot "Cougar" |
1 x | Pilot "Goose" (Slimline) |
1 x | 1/6 Pilot "John" |
1 x | 1/6 Pilot "Buddy" |
1 x | 1/6 Pilot "Garry" |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | 1/10 Pilot "Jimmy" |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | 1/7 Pilot "Japanese" |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Straightened threaded rod M3 - 1m |
1 x | Straightened threaded rod M2-1m |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | Profile ABS half cane 4x1000 mm |
1 x | ABS angle 4,0x4,0x1000 mm |
![](images/pixel_black.gif) |
50,957.84EUR |