Top » Catalog » Motors & Turbines » Explosion » Oils/Smoke Liquids » DELUX02

28.00EUR

Aceite DELUXE turbine Jet Oil 1 litro
[DELUX02]

Description "DELUXE Turbine jet oil 1 Litre"
Power Model Jet is the first fully synthetic, environmentally friendly, purpose made model turbine oil designed to combine sustained maximum turbine performance with safer emissions.
It is designed at a molecular level with pure, clean, synthetic components. The oil is free of potentially harmful organo-phosphorus & aromatics. The result is a unique lubricant that burns cleanly, with outstanding turbine lubrication, turbine life, less harmful gases and improved air quality.
It is dyed for easy recognition in fuel mixes and is odourised for increased appeal.
Power Model Jet is also non-flammable and non-harmful to skin, making it safe to handle and easy to ship. Developed with the assistance of top turbine manufacturers including Xicoy Jets Mundt and many others.
Cleaner and safer emissions
Use in both kerosene and diesel mixes
Green colour for rapid recognition in fuel
Anti-electrostatic technology for minimal interference
Non-flammable, safe to handle & transport
Will not discolour modelling paints, finishes & fuel systems

under request

Reviews

Quick Find

Shopping Cart

1 x	Pilatus PC-21 2100 mm RED/WHITE (SebArt)
1 x	Female connector for 12 pines AWG
1 x	Battery LiPo GENS 4000 mAh 2S 7,4v RX (Gens Ace)
1 x	Female connector for 16 pines AWG
1 x	Propeller 3BL 50 mm M4 Plastic
1 x	Oracover Orange 2 m
1 x	Male connector for 12 pines AWG
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Modulo reglaje avance V3
1 x	Turbina X132 H "Compact Version"
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	LUCAS pilot ARTF
1 x	Motor Set CHALLENGER Indoor
1 x	CHALLENGER Indoor
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Blade holder center
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Long pinned hinge (12 uds)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Steering lever
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Futaba male 40 cm extension
1 x	Horn with ball 55x40
1 x	RH long aluminium horn (2pcs)
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Blue smoke canister 100 g
1 x	Premium servo extension 50cm
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Cierva C30 Body Spain
1 x	Connector CAN 15
1 x	Extension 15 cm (Futaba)
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Aceite DELUXE turbine Jet Oil 1 litro
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Cabel "Y" 15 cm
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	Extension silicon 30 cm female (Futaba)
1 x	ABS angle 5,0x5,0x1000 mm
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Premium servo extension 100cm
1 x	Horn 20x28,5 mm (2 pcs)
1 x	AC-10 pre-rotacion with motor
1 x	Xplorer4 anemometro
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Micro flex hinge (12 uds)
1 x	Oils Pumps Empty (1 liter)
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Brass control horn M4 short for wire (10pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Ballast 700gr OPALE
1 x	Paramotor BackPack XXS (without accessories)
1 x	Windsock Ozone L - 700 mm
1 x	Para-RC Trike "RC-Bullix"
1 x	Profile ABS half cane 2.0x1000 mm
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	Red smoke canister 100 g
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Miniature brass strap hinge, 1 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Head spacer
1 x	ABS tube 10.0x8.0x1000 mm
1 x	Baseplate servo
1 x	XH male balance (5S) connector (2 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Head lower part
1 x	Blade holder upper
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Steering arm 16 mm Ø 3 mm
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	Extension silicon 10 cm (Futaba)
1 x	XH male balance (4S) connector (2 pcs)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Screw-lock connector M2 (2 uds)
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Electric rocket starters (6 pcs)
1 x	ABS tube 6.0x5.0x1000 mm
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Cabel "Y" 30 cm (graupner)
1 x	Extension 90 cm (Futaba)
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Raer wall
1 x	6 mm blue aluminium threaded horn with patella
1 x	XH female balance (4S) connector (2 pcs)
1 x	Ball Link Plier
1 x	Profile ABS Square 2 x 1000 mm
1 x	Red smoke canister 140 g
1 x	20 mm carbon horn
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Profile ABS half cane 3x1000 mm
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Horn for flap control (1 pcs)
1 x	ABS tube 5.0x3.0x1000 mm
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	ABS tube 4.0x2.0x1000 mm
1 x	"S" set for boats
1 x	Nut M1,6
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	ABS tube 8.0x7.0x1000 mm
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)

6,861.18EUR