2,358.91EUR

Turbina X132 H "Compact Version"
[XIX132C]


The X132 has same lightweight electronics as all other Xicoy engines that allow simple installation and of course it incorporates our FlexThrust Technology giving you anywhere from 60N to 132N at the press of a button. The X132 is perfect for all those popular models that need engines in the range of 60N to 132N. Plenty of kits available to chose from that are of a affordable and practical size. Having an engine that can be used on all of them, the investment on a X132 is a perfect, long term,decision!!

Specifications
Weight: 940g (2,1lb) engine, 1.140g (2,5lb) total installed weight except battery
Thrust: Continuously adjustable from 60 to 132N (29.7 Lbf, 13,5Kg )
Telemetry: Jeti/Futaba/MPX/Core/Hott/FrSky/Spektrum (optional modules)
Starter motor: High speed brush-less
Size: 90,2mm diameter, 198mm long
Service interval: 25 hours
Rpm Range: 40,000 ... 150.000 RPM
Reccomended battery: 2s Lipo/2200mAh reccomended. (3s Life compatible).
Battery not included
Other: Built in sensors for ambient temperature and atmospheric pressure to automatically adjust the engine performance
Idle Thrust: 4,9N (0,5kg/1,1Lbf)
Fuel: Kerosene + 4% oil. Diesel allowed but not reccomended. Fuels containing Biodiesel not allowed.
Fuel pump: Digitally controlled brush-less pump
Fuel consumption: 360g/minute at 132N. (436ml/min)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Pilatus PC-21 2100 mm RED/WHITE (SebArt)
1 x Female connector for 12 pines AWG
1 x Battery LiPo GENS 4000 mAh 2S 7,4v RX (Gens Ace)
1 x Female connector for 16 pines AWG
1 x Propeller 3BL 50 mm M4 Plastic
1 x Oracover Orange 2 m
1 x Male connector for 12 pines AWG
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Modulo reglaje avance V3
1 x Turbina X132 H "Compact Version"
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x LUCAS pilot ARTF
1 x Motor Set CHALLENGER Indoor
1 x CHALLENGER Indoor
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x Aro pasacable Ø25 mm (4 pcs)
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Blade holder center
1 x Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x Long pinned hinge (12 uds)
1 x Horn 16,5x20 mm (2 pcs)
1 x Steering lever
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Futaba male 40 cm extension
1 x Horn with ball 55x40
1 x RH long aluminium horn (2pcs)
1 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Blue smoke canister 100 g
1 x Premium servo extension 50cm
1 x ABS tube 20.0x18.0x1000 mm
1 x Cierva C30 Body Spain
1 x Connector CAN 15
1 x Extension 15 cm (Futaba)
1 x ABS angle 4,0x4,0x1000 mm
1 x Aceite DELUXE turbine Jet Oil 1 litro
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Cabel "Y" 15 cm
1 x Connectors banna oro 3,5 mm (M/F)
1 x Mixers smoke bombs AX-60 (5 pcs)
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x Extension silicon 30 cm female (Futaba)
1 x ABS angle 5,0x5,0x1000 mm
1 x Starter 12v (Max 90 and 15ccm)
1 x Premium servo extension 100cm
1 x Horn 20x28,5 mm (2 pcs)
1 x AC-10 pre-rotacion with motor
1 x Xplorer4 anemometro
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Micro flex hinge (12 uds)
1 x Oils Pumps Empty (1 liter)
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Brass control horn M4 short for wire (10pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Ballast 700gr OPALE
1 x Paramotor BackPack XXS (without accessories)
1 x Windsock Ozone L - 700 mm
1 x Para-RC Trike "RC-Bullix"
1 x Profile ABS half cane 2.0x1000 mm
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x CF tube set (Ø 38 mm y Ø 14 mm)
1 x Red smoke canister 100 g
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Miniature brass strap hinge, 1 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Head spacer
1 x ABS tube 10.0x8.0x1000 mm
1 x Baseplate servo
1 x XH male balance (5S) connector (2 pcs)
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Head lower part
1 x Blade holder upper
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Steering arm 16 mm Ø 3 mm
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x Extension silicon 10 cm (Futaba)
1 x XH male balance (4S) connector (2 pcs)
1 x Ball link Aluminio M3 (2 pcs)
1 x ABS tube 4.0x3.0x1000 mm
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x Screw-lock connector M2 (2 uds)
1 x Cross Connector 4.0 mm x 1000 mm
1 x Electric rocket starters (6 pcs)
1 x ABS tube 6.0x5.0x1000 mm
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Cabel "Y" 30 cm (graupner)
1 x Extension 90 cm (Futaba)
1 x Carbon roving DowAksa / 24k / 1600 tex
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Raer wall
1 x 6 mm blue aluminium threaded horn with patella
1 x XH female balance (4S) connector (2 pcs)
1 x Ball Link Plier
1 x Profile ABS Square 2 x 1000 mm
1 x Red smoke canister 140 g
1 x 20 mm carbon horn
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x Profile ABS half cane 3x1000 mm
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Horn for flap control (1 pcs)
1 x ABS tube 5.0x3.0x1000 mm
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Cabel "Y" 30 cm (Futaba)
1 x Locking cable tie 4.6x203 (uds)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x ABS tube 4.0x2.0x1000 mm
1 x "S" set for boats
1 x Nut M1,6
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x ABS tube 8.0x7.0x1000 mm
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Horn 6/20 with M3 Bearing
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x 2 mm male connector (2 pcs) with safety connector
1 x Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x Connectors banna oro 2 mm (M/F)
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Locking cable tie 3.2x142 (uds)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Z Bender - S Type Tool
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Connectors banna oro 6,0 mm (M/F)
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x 200 mm extensión servo HITEC/JR
1 x Baering 3x8x4
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x White smoke bombs AX-3 (10 pcs)
1 x Extension lead 15 cm Multiplex
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one
7,311.94EUR
Manufacturers
Manufacturer Info
Xicoy Turbine
Other products
Languages
Español English
Currencies