Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Epoxy » Epoxy R-G » R1001001

28.00EUR

Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
[R1001001]

Epoxy Resin L + Hardener S (15 min)
Set of two components
Free from nonylphenol, benzyl alcohol and DETA
Low viscosity, solvent- and filler-free
Fast impregnation of glass, aramid and carbon fibres
High static and dynamic strength
Low surface tension, good adhesion and low curing shrinkage
Ideal for bonding wood, metal, Styropor® etc.
Epoxy resin L with the corresponding hardeners is the most frequently used laminating and bonding resin from the R&G product range.
Epoxy resin L with Hardener S has similar mechanical properties to the laminating systems commonly used in aircraft construction.
Processing time: 15 minutes (100 g / 20 °C)
Mixing ratio: 100 : 40 parts by weight Epoxy Resin L : Hardener S
100 : 45 parts by volume Epoxy Resin L : Hardener S
Curing time (at 23 °C): 16 - 24 hours
Cold hardening, hardens from 5 °C (low temperature hardener)
Heat distortion temperature: Approx. 65 °C

few units

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Wing Joiner ULTIMATUM 2.0 m
85.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	SlowFlyer control horn (3 pcs)
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	XH female balance (4S) connector (2 pcs)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	ABS tube 3.0x1.0x1000 mm
1 x	Horn 5/15 with M2 Bearing
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	6 mm blue aluminium threaded horn with patella
1 x	Conector BEC male (10 pcs)
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	ABS tube 12.0x10.0x1000 mm
1 x	Bungee HLG Premium
1 x	ABS tube 7.0x5.0x1000 mm
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	ABS tube 9.0x8.0x1000 mm
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	Horn 6/27 with M3 Bearing
1 x	ABS tube 2.0x1.0x1000 mm
1 x	Horn 6/20 with M3 Bearing
1 x	Connectors DEANS (T)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	20 mm carbon horn
1 x	6 mm red aluminium threaded horn with patella
1 x	RH long aluminium horn (2pcs)
1 x	XH male balance (5S) connector (2 pcs)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	ABS tube 8.0x6.0x1000 mm
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Horn for flap control (1 pcs)
1 x	ABS tube 9.0x7.0x1000 mm
1 x	ABS tube 10.0x8.0x1000 mm
1 x	Cable control set
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	Banna gold connector 2,5 mm (M/F)
1 x	XH female balance (3S) connector (2 pcs)
1 x	Connector CAN 15
1 x	Connectors DEANS 4 pins (1 pair)
1 x	ABS tube 6.0x5.0x1000 mm
1 x	MPX Sub-D Adaptor
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	Connectors banna oro 2 mm (M/F)
1 x	ABS tube 8.0x7.0x1000 mm
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Small aluminium horn red (2pcs)
1 x	Horn 5/20 with M2 Bearing
1 x	XH male balance (2S) connector (2 pcs)
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	Horn with ball 40x30
1 x	Small aluminium horn gold (2pcs)
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	6 mm aluminium horn with patella
1 x	ABS tube 5.0x4.0x156 mm
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	30 cm DEANS female connector
1 x	Connectors banna oro 4 mm (M/F)
1 x	Conector BEC female (10 pcs)
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	ABS tube 3.0x2.0x330 mm
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	Optotronix Aurora Plug
1 x	XH male balance (4S) connector (2 pcs)
1 x	Horn 5/10 with M2 Bearing
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Vasa model Catapult
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Screwdriver for Hexagon 1,5mm
1 x	2,0x50 mm allen screwdriver
1 x	Copier 5x20 cm pcs
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Ball Link Plier
1 x
1 x	Crimping tool
1 x
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Hot Glue Stick GREEN
1 x	3,0x60 mm allen screwdriver
1 x	Starter Sullivan-STAR 601
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	2,5x60 mm allen screwdriver
1 x	Digital scale up to 40 kg
1 x	Starter EM Gear Power 80
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Long ball link M1.6 (6 uds)
1 x	Extension silicon 100 cm (Graupner)
1 x	Premium servo extension 50cm
1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	Extension 15 cm (Futaba)
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Joint with bearing M2,5 22x5,5
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Ball link M3 RPA's-UAV's
1 x	Joint with bearing M3 22x5,5
1 x	Short ball link M3 (6 uds)
1 x	Extension silicon 30 cm female (Futaba)
1 x	Extension 100 cm (Futaba)
1 x	M3 INDUSTRIAL ball link (2 uds)
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	Long ball link M3 (6 uds)
1 x	Futaba male 40 cm extension
1 x	Ball link M3 (10 pcs)
1 x	Premium servo extension 25cm
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Circlick securite
1 x	Blue metalic ball link M2/2 azul (2 pcs)
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	M2,5 5Diam metal ball link V3 (2 pcs)
1 x	Ball link M1.6 (6 uds)
1 x	Motor DLE 200cc Premium Muffler
1 x	Small Crow DLE-170M
1 x	Big Crow DLE-170M
1 x	Motor DLE 170 M- Paramotors
1 x	Round Rod 3,0x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Round Rod 5,0x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Round Rod 1,0x1000 mm
1 x	Strip 1,5x1,5x330 mm

6,725.32EUR