Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Epoxy » Epoxy R-G » R1001001

28.00EUR

Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
[R1001001]

Epoxy Resin L + Hardener S (15 min)
Set of two components
Free from nonylphenol, benzyl alcohol and DETA
Low viscosity, solvent- and filler-free
Fast impregnation of glass, aramid and carbon fibres
High static and dynamic strength
Low surface tension, good adhesion and low curing shrinkage
Ideal for bonding wood, metal, Styropor® etc.
Epoxy resin L with the corresponding hardeners is the most frequently used laminating and bonding resin from the R&G product range.
Epoxy resin L with Hardener S has similar mechanical properties to the laminating systems commonly used in aircraft construction.
Processing time: 15 minutes (100 g / 20 °C)
Mixing ratio: 100 : 40 parts by weight Epoxy Resin L : Hardener S
100 : 45 parts by volume Epoxy Resin L : Hardener S
Curing time (at 23 °C): 16 - 24 hours
Cold hardening, hardens from 5 °C (low temperature hardener)
Heat distortion temperature: Approx. 65 °C

few units

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Servo GO-1023MG 7.0 kg.cm 0.09s/60º
47.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 20 m
1 x	Glass fabric 25 g/m² (1 m²)
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 5 m
1 x	Glass fabric 25 g (2 m²)
1 x	Fiberglass 25 g/m² 5000x1270 mm
1 x	Glass fabric 49 g/m² (1,27 x 20 m)
1 x	Fiberglass 280 g/m² 5000x1000 mm
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	SUS wire 3m (nylon coated)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	XH male balance (4S) connector (2 pcs)
1 x	Round Rod 1,5x1000 mm
1 x	Locking cable tie 4.6x203 (uds)
1 x	Strip 2,5x1,25x330 mm
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	MPX Sub-D Adaptor
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	Screw-lock connector M2 (2 uds)
1 x	XH female balance (2S) connector (2 pcs)
1 x	One touch canopy lock
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	Conector BEC male (10 pcs)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Strip 1,5x1,5x330 mm
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Round Rod 1,25x1000 mm
1 x	Banna gold connector 2,5 mm (M/F)
1 x	XH male balance (5S) connector (2 pcs)
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Round Rod 5,0x1000 mm
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	XH male balance (3S) connector (2 pcs)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Round Rod 4,0x1000 mm
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Round Rod 6,0x1000 mm
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	ABS I Strip 10x5x1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Connectors DEANS 4 pins (1 pair)
1 x	Covered closure or fairings
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	XH male balance (2S) connector (2 pcs)
1 x	Connectors DEANS (T)
1 x	ABS I Strip 20x10x1000 mm
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Sheet Depron Aero 1250x800x3 mm
1 x	Buy Perforated film 100 cm / 50 m
1 x	Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish
1 x	Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	Buy Perforated film 145 cm / 50 m
1 x	Glass fabric 425 g/m² aero,10x1m
1 x	Windsock Ozone L -1200 mm
1 x	MAX pilot ARTF
1 x	Paramotor BackPack XXS 2
1 x	Towing hook
1 x	Wing OXY 0,5 pulgadas2
1 x	Towing hook <3m
1 x	Paramotor Trike XL
1 x	Rescue 1,8m2 / BackPack
1 x	SERVO HOLDER
1 x	Parachute BACKUP X100
1 x	Para-RC Mix
1 x	Adjustable launching hook
1 x	Windsock Ozone L - 700 mm
1 x	Tow hook for tug
1 x	Paramotor BackPack XXS (without accessories)
1 x	Opale Rucksack
1 x	Big-Malibu XL Roof box with surfboard rack GREY

5,989.57EUR