47.90EUR

Servo GO-1023MG 7.0 kg.cm 0.09s/60º
[KAV201023MG]


Very strong and thin (10mm) programmable digital micro servo 23g with metal gears and wide range of supply voltage (4,8-8,4V), 2xBB, ideal for ailerons and flaps of gliders. 4.5kg.cm torque, 0.14s/60° speed at 4.8V, 5.2kg.cm torque, 0.12s/60° speed at 6.0V, 6.5kg.cm torque, 0.10s/60° speed at 7.4V. Aluminum servo case for perfect cooling under high load

Very powerful programmable digital micro servo with steel gears and with output shaft mounted on two ball bearings for use in RC models of all types. Thanks to its flat servo case with height of 10 mm, it is particularly suitable for controlling ailerons and flaps in RC glider models with thin wing profiles. The servo is housed in an aluminium case for perfect cooling even under high loads.With the help of the USB programmer/interface for GO servos and the PC operator program you can program a wide range of servo parameters (servo end-points, servo reverse and neutral position, overload protection, soft start, fail-safe, etc.).
Programmable functions
Servo angle: Used to set the maximum travel of the servo. Default setting is approx. 120° at normal control pulse width range (900~2100 µs); approx. 180° at maximum allowed control pulse width range (500~2500 µs).
Servo Neutral: Used to set the neutral (center) position of the servo.
Damping Factor: Sets the servo's stopping behavior characteristic.
PWM Power: Sets the output power of the servo. As higher the value is, the faster the servo is and the more thrust it has - of course, the current draw will be proportionally higher. Range: 39.2~100%
Sensitivity: Adjusts the sensitivity (insensitivity bandwidth) of the servo. The higher the value - the narrower the insensitivity bandwidth - the servo will only move if the change in control signal width is greater than the insensitivity bandwidth. Setting the sensitivity value too high can cause the servo to oscillate in some applications. Range: Ultra High (Extra High - sensitivity bandwidth approx. 1 µs) - High (High - approx. 2 µs) - Medium (Medium - approx. 3 µs) - Low (Low - approx. 4 µs)
Soft start: Enables/disables the soft start function. This function prevents the servo from abruptly moving into the operating position after power is turned on, thus reducing the risk of damage to the servo gears.
Inversion: Reverses the sense of servo movement.
FUTABA SR mode: Used only with FUTABA RC system working in SR mode. Do not turn this option on if you are using a different FUTABA RC system setting or any other brand of RC system.
SANWA SSR mode: Used only with SANWA RC system working in SSR mode. Do not turn this option on if you are using a different SANWA RC system setting or any other brand of RC system.
Fail-safe: If the control signal from the receiver is completely lost or if the servo cannot detect the signal properly (e.g. due to interference), the servo may enter one of three fail-safe modes:
(a) Free: Fail-safe is disabled.
(b) Maintain Position: the servo maintains the position corresponding to the last correctly received signal.
(c) Transition to neutral: The servo returns to the neutral (1500 µs pulse width) position.
Overload protection: enables or disables servo overload protection in three levels - once the overload has lasted for a preset time (in seconds), the servo output power is limited to the corresponding preset value (in % of max power).
Reset: Restores the connected servo to its factory default settings.
Extended supply voltage 4.8-7.4 V (nominal).Output shaft with 25 teeth.
Servo dimensions Micro
Servo type Digital
Thrust at 4.8V [kg/cm] 4.5
Thrust at 6.0V [kg/cm] 5.2
Thrust at 7.4V [kg/cm] 6.5
Thrust at 8.4V [kg/cm] 7
Speed at 4.8V [s/60st.] 0.14
Speed at 6.0V [s/60st.] 0.12
Speed at 7.4V [s/60st.] 0.1
Speed at 8.4V [s/60st.] 0.09
Servo gears Metal
Ball bearings 2×
High-voltage Yes
Power supply [V] 4.8 - 8.4
Length [mm] 30
Width [mm] 10
Height [mm] 30.5
Weight [g] 23
Intended for Aeroplanes


few units
few units

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Straightened rod Ø 4.0 mm x 1000 mm
2 x Straightened rod Ø 2.5 mm x 1000 mm
3 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
2 x Straightened rod Ø 4.5 mm x 1000 mm
2 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Straightened rod Ø 2.0 mm x 1000 mm
2 x Straightened rod Ø 1.5 mm x 1000 mm
2 x BALSA triangular 15x15x1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
2 x OBECHI sheet 2.0x3.0x1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x BALSA trip 10x10x1000 mm
1 x Walnut wood slat 1.5x1.5x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
2 x Liston HAYA 8 x 8 x 1000 mm
1 x ABS tube 7.0x5.0x1000 mm
1 x ABS tube 6.0x5.0x1000 mm
1 x Quicklock washer 1.5 mm (10 pcs)
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x Spring lock washer 2.6 mm (20 pcs)
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x ABS tube 6.0x4.0x1000 mm
2 x Aluminium wide washer M3 blue (4 pcs)
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x ABS tube 20.0x18.0x1000 mm
1 x ABS tube 18.0x16.0x1000 mm
2 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x Lock washer 2.2 mm (20 pcs)
1 x Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
2 x Lock washer 4.3 mm (20 pcs)
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Aluminium wide washer M3 gold (4 pcs)
1 x M3 black washers (4 pcs)
1 x Lock washer 3.2 mm (20 pcs)
2 x ABS tube 4.0x2.0x1000 mm
1 x ABS tube 12.0x10.0x1000 mm
1 x Flat washer 3.2 mm (20 pcs)
1 x ABS tube 2.0x1.0x1000 mm
2 x ABS tube 14.0x10.0x1000 mm
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x Quicklock washer 2 mm (10 pcs)
1 x Flat washer 2.7 mm (20 uds)pcs)
1 x ABS tube 3.0x2.0x330 mm
1 x ABS tube 5.0x3.0x1000 mm
2 x Flat washer 2.2 mm (20 pcs)
1 x Spray EC Red 400ml
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Spannlack 1000 ml
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Spray adhesive AEROFIX 2
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Spray YELLOW Inca Lexan 150ml
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x 500 ml sealer (DOPE)
1 x 1000 ml sealer (DOPE)
1 x Solvent Plasti Dip 1000 ml
1 x Plasti Dip Liquid Tape 429 ml orange
1 x Release wax 250ml
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Carbon fiber rod 20 mmx1000 mm
1 x Presto SF Light Filler styrene-free (420 g)
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Carbon fiber rod 10 mm x 1000 mm
1 x Plasti Dip Liquid Tape 429 ml black
1 x Universal Colour Paste deep black 250 g
1 x 20 g tin paste
2 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Painting GHT Lexan Black 150 ml
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Spray Graphit 33
1 x Nitroverdu 500 ml
1 x Hobbylite Filler, Balsa colour
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Truck-trailer for gliders 720 x 285 mm
1 x 1/4 Pilot "Mike"
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x ARAMID honeycomb 1300x2600x2 mm
1 x M2 5Diam black ball link V2 (2 pcs)
1 x Straightened threaded rod M3 - 1m
1 x Brass rod Ø 1.0 mm x 1000 mm
2 x Straightened threaded rod M2-1m
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Straightened rod Ø 1.2 mm x 1500 mm
2 x Beech dowels 3.0 x 1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x BALSA triangular 6x6x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Beech dowels 10 mm x 1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x Tapping Screw M2.9x13 (10 pcs)
1 x PROFI Box JETI
1 x Kontronik ProgUnit
1 x Pan Head Screw M1,6x6 (10 pcs)
1 x Nylon Screw M6x40
1 x Nylon Screw M4x20
1 x Screw M4x30 (10 pcs)
1 x Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs)
2 x Pan Head Screw M2x6 PH
1 x Quicklock washer 1 mm (10 pcs)
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x ABS tube 8.0x6.0x1000 mm
1 x Screw KB 1.4x6 mm (10 pcs)
1 x Pan Head Screw M2x8 PH
1 x Socket Head Screw M2x10
1 x Screw M2x6 (10 pcs)
1 x Lock nut M4 (10 pcs)
1 x ABS tube 5.0x4.0x1000 mm
1 x Hexagonal Nut M3 (10 pcs)
1 x DYMOND VTX UBS Programming adapter
1,457.57EUR
Manufacturers
Manufacturer Info
Kavan
Other products
Languages
Español English
Currencies