15.75EUR

20-25mm Servo Arm
[ER770]


DESCRIPTION

Servo arm 20-25mm:
Electron Retracts quality, now available in Electron Accessories
INCLUDES:
1x Servo Arm 20-25mm

Highlights:
PERFECTLY PRECISE: Designed to be a perfect fit on your servo, using all the latest tech to assure a tight and precise fit, without the need for second screws. THOUGHTFUL DESIGN: Not just another servo arm. Designed to be thicker and stronger where it is needed, and lighter and milled back where excess isn’t required. DIFFERENTS LENGHTS FOR EACH APPLICATION: We offer 4 different sizes of arms, each of them available in two colors (red and black).
The arms go from 10mm up to 1.75”.
ONLY THE BEST IS GOOD ENOUGH: As with our retracts, all servo arms are carefully milled from aircraft grade T6 7075 aluminum, with an anodised and laser engraved finish.


temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Motor DLE 170 M- Paramotors
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x Motor DLE 430 cc - Paramotors
1 x Motor DLE 200cc Premium Muffler
1 x Small Crow DLE-170M
1 x PYRO 750-50L Competition
1 x Combo FOXY C3530-700 + FOXY 80 amp
1 x Motor KAVAN PRO 2225-1600
1 x FesEx-Uni6 System
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x ABS Strip 1.0x4.0x1000 mm
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x ABS Strip 1.0x3.0x1000 mm
1 x White smoke canister 65 g
1 x 25 mm reinforced hinge
1 x White smoke bombs AX-9 (10 pcs)
1 x Small aluminium horn gold (2pcs)
1 x Profile ABS half cane 2.5x1000 mm
1 x ABS tube 18.0x16.0x1000 mm
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Flat washer 2.2 mm (20 pcs)
1 x AX-60 starters (5 pcs)
1 x SE Ring 330 mm (4 pcs)
1 x Black smoke bombs AX-60 (5 pcs)
1 x Profile ABS Square 4 x 1000 mm
1 x Kit hydraulic brake
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x SE Ring 480 mm (2 pcs)
1 x 15 mm reinforced hinge
1 x ABS Strip 1.5x8.0x1000 mm
1 x Quicklock washer 1.5 mm (10 pcs)
1 x Strip ABS 2.0x10.0x1000 mm
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x Ventral support for AX-18/AX-60
1 x Round Rod 3,0x1000 mm
1 x Horn for flap control (1 pcs)
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Circlik for shaft 1.2 mm (10 pcs)
1 x SE Ring 400 mm (2 pcs)
1 x ABS tube 3.0x1.0x1000 mm
1 x Cable with accesories
1 x CM-3
1 x Lock washer 2.7 mm (20 pcs)
1 x Cabel charger transmitter GRAUPNER
1 x Profile ABS Square 1 x 1000 mm
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Smoke set "Glider"
1 x Green smoke canister 65 g
1 x 6 mm red aluminium threaded horn with patella
1 x Strip ABS 2.0x5.0x1000 mm
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x ABS Strip 1.0x2.0x1000 mm
1 x Horn 13,5x16 mm (2 pcs)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x ABS angle 2,0x2,0x1000 mm
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x Blue smoke canister 100 g
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Green smoke canister 100 g
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x SERVO HOLDER
1 x Towing hook
1 x Ring 320 mm length (5 pcs)
1 x Round Rod 6,0x1000 mm
1 x RF9 Flight Simulator with Spektrum Controller
1 x SE Ring 350 mm (2 pcs)
1 x GameCommander USB Universal
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x B4-0 rocket charges (6 pcs)
1 x Horn 6/20 with M3 Bearing
1 x Xplorer3 anemometro
1 x DYNAMOMETER S-1580
1 x Quicklock washer 3.5 mm (10 pcs)
1 x Marker ties (20 pcs)
1 x Nylon hinge 15x0,3 (10 pcs)
1 x White smoke canister 140 g
1 x Angle of incidence meter
1 x Adjustable launching hook
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Pin hinge 34x16 mm (10 uds)
1 x Horn with ball 55x40
1 x Smoke set "M"
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x ABS tube 7.0x5.0x1000 mm
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x ABS Strip 1.5x3.0x1000 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x BALSA trip 3.0x3.0x1000 mm
1 x Polyurethan FESTO hose 3x0,5 mm, transparent
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Hose stopper 4 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Buy Perforated film 100 cm / 10 m
1 x A/C quality beech plywood 600x300x6.0 mm
1 x 1/7 Pilot "Japanese"
1 x Mini neumatic retract 3 mm landing gear (Het-rc)
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x Connectors banna oro 3,5 mm (M/F)
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x Angled clevis with threaded rod M3
1 x 30 cm MULTIPLEX female connector
1 x Landing gear clamp for Ø 2 mm (4 uds)
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Connectors banna oro 4 mm (M/F)
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Nylon threaded block M4 (2 uds)
1 x 1,6x1000 mm 2:1 red termoretract tube
1 x Balsa panel 8.0x100x1000 mm
1 x 1/6 Pilot "Garry"
1 x Conector JR Servo male (10 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Carbon fiber rod 12 mm x 1000 mm
1 x Avia spare blue cockpit (Top Model)
1 x FUNRAY RR
1 x E-FUN BUG (ROI-Import)
1 x Aero-Master (Aero-naut)
1 x Glider IKARUS
1 x HERON RR
1 x FOX 3000 mm, Fuselage (FMS)
1 x Aero-Master Fuselage (Aero-naut)
1 x Glider STROLCH
16,094.66EUR
Manufacturers
Languages
Español English
Currencies