50.00EUR 15.90EUR

Mini-Pix Esc 15 Amp
[KON4002]


This products have a good performance and can ensure high efficiency (90% including when you're operatting under full gas avoiding overheating and flight time low) and competing with explosion engine's performance.

General features:
- Only for brushless motors.
- Soft start that rapidly rise up to the maximum power (providing security).
- RPM control for the velocities of drifts and the main rotor, great for travel in and out of the maneuvers.
- Auto-Programmable mode (APM) that automatically adjusts the variator to the radio's gas channel and sets the strength of stopping, and current and fast start limitations.
- Supply limitation.
- High performance microprocessor design thas controles the heat dissipation.
- Overheatting protection.
- Superflex high temperature cables.
- You can work with or without sensorizar engines.

Pix variator features:
- The new Pix variators are effective and low-cost; they're designed for brushless motors and replace Swing Kontronik series. The desig is entirely new. Compared with their predecessors, this variators have new and improved performance characteristics.

- The operation has been reduced to essentials things. Do not you know anything about timing / frequency? No matter; you don´t have to be an expert in engines to manage your Pix. Like their predecessors, the Pix variators, adapt themselves automatically to the engine. Thanks to their APM mode, there is no need to program it. You can concentrate on the basics: connecting the battery and fly! It's that easy!

- All variators come with a Pix Li-Po integrated that can turned on and off simply by pressing a button. In fact, a major goal in its design, was to build the variator optimized to work with rotary engines of a large number of poles like Kontronik Dancer.

- The Pix variators are an attractive alternative in cost, compared to Jazz Kontronik if you do not want any specific function such as strong BEC, unlimited partial load condition or high voltage input.

- Moreover, now the PIX drives are programmed through the interface ProgCARD.


few units
few units

Reviews

Customers who bought this product also purchased
AXI2203/40 VPP
AXI2203/40 VPP

few units
few units

Propeller Pleg CAM Carbon 6x3
Propeller Pleg CAM Carbon 6x3

few units
few units

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
    Brushless->
      Aero-Naut
      Hacker
      Jeti->
      KAVAN
      Kontronik->
        Accesorios
      MGM
      Otros
      RIPMAX
      ROI-Import
      Top Model
      YGE
    Brushed
    Program Cards
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Trike XL motor set (motor+esc+prop)
1 x Para-RC Trike "RC-Bullix"
1 x Paramotor Kit Camo H1.5/ Ben Red
2 x Jeti Black cap
1 x Opale Rucksack
1 x Rescue 1,8m2 / BackPack
1 x Para-RC "RC-Evo-Cross" Rescue
2 x Wing OXY 0,5 pulgadas2
1 x Windsock Ozone L - 700 mm
1 x Paramotor BackPack XXS 2
1 x Aramid 50 daN 50 m
1 x LUCAS pilot ARTF
2 x Windsock Ozone L -1200 mm
1 x Set cintas unión paracaídas 145 cm
1 x Para-RC Mix
1 x Parachute P4
2 x Flat washer 2.2 mm (20 pcs)
2 x Flat washer 1.7 mm (20 pcs)
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Spring lock washer 4.1 mm (20 pcs)
2 x Lock washer 2.2 mm (20 pcs)
1 x Circlik for shaft 1.2 mm (10 pcs)
2 x Aluminium cap bolt washer M4 green (8 pcs)
1 x Quicklock washer 3 mm (10 pcs)
1 x Flat washer 2.7 mm (20 uds)pcs)
3 x Lock washer 2.7 mm (20 pcs)
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Aluminium wide washer M3 red (4 pcs)
1 x Locking cable tie 3.2x142 (uds)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Locking cable tie 2.5x100 (uds)
1 x Cap closure 33/23.5mm (2 uds)
1 x Cabin latch Fox MDM1 4m (pair)
1 x Canopy Latch
1 x Steering arm 12 mm Ø 4 mm
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Screw-lock connector M2 (2 uds)
1 x Steering arm 16 mm Ø 4 mm
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
2 x Aluminium alloy coupler for carbon tube 6/M4
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
2 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x ARAMID honeycomb 1300x2600x2 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x Servo NARO Max Std
1 x Extinguisher CO2 - 2 Kg
1 x Hovercraft sailcloth
1 x ABS angle 4,0x4,0x1000 mm
1 x Ventral support for AX-18/AX-60
1 x Soporte grifo FESTO (2 pcs)
1 x Suncover 100cc Red
1 x MAX pilot ARTF
1 x Blue Aluminium lock nut M3 (4 pcs)
1 x Lock washer 4.3 mm (20 pcs)
1 x Hexagonal Nut M4 (10 pcs)
1 x Hexagonal Nut M3 (10 pcs)
1 x Screw M2.5x10 (10 pcs)
1 x Resistor 3W 5% 2R2
1 x Hexagonal Nut M1 (10 pcs)
1 x ED Position Lights wireless (Set of 3)
1 x Pan Head Screw M2x8 PH countersunk head
1 x Quicklock washer 2 mm (10 pcs)
1 x Pan head screw M2x16 PH
1 x LED lighting system High Power
1 x Spring lock washer 2.6 mm (20 pcs)
1 x Screw M2x8 (10 pcs)
1 x Hexagonal Nut M4 (20 pcs)
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Heat sink for Optotronix LEDs
1 x LED wire (green - 2pcs)
1 x Lock washer 3.2 mm (20 pcs)
1 x Pan Head Screw M2x6 PH
1 x Nut for mounting M4 (4 pcs)
1 x Treaded hexagonal socket insert M3 Br (4 pcs)
1 x Lock nut aluminium M2.5 (4 pcs)
1 x Jet Afterburner Simulator NF-Jet2YY Set
1 x NF-3m Heli Kit
1 x Servo M2x7/16 screw (4 pcs)
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Screw M2.5x20 (10 pcs)
1 x Screw M3x20 (10 pcs)
1 x Screw M4x20 (10 pcs)
1 x Socket Screw M3x9 mm
1 x Screw M3x5 (10 pcs)
1 x Parachute BACKUP X100
1 x Wing OXY 5,0 m2
1 x Parachute PV6 for F3J
1 x Paramotor BackPack XXS (without accessories)
1 x PVC plate 320 x 194 x 0.23 mm (brown)
1 x Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs)
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x Snap long M2 (10 uds)
1 x Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
1 x Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x Motor OS 3820-1200 electric
1 x Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs)
1 x 250 mm / 16 mm Airbrakes
1 x Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs)
1 x Fiberglass plate 620x540x1,0 mm
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x Teflon rollers 80 mm x 15 mm Diam.
1 x Cockpit latch closing I=10 mm
1 x 140 mm rods set for direction control
1 x Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs)
1 x Foam plastic plates (310x210x5 mm)
1 x Electric spoiler 250 mm (2 pcs)
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Cable grommet 9.5 mm (4 uds)
8,634.24EUR
Manufacturers
Manufacturer Info
KontroniK
KontroniK Homepage
Other products
Languages
Español English
Currencies