6.38EUR

Cyano INSTA - CURE™ (12g)
[BSI101]


Cyanoacrylates (CAs) have become the adhesive of choice for most hobby and household applications. High quality CAs such as INSTA-CURE™, when used properly, form bonds that in many cases are stronger than the material that is being adhered. INSTA-CURE™ is a highly refined CA which, combined with its freshness, gives a guaranteed 2 year shelf life. CAs are reactive monomers that chemically link (polymerize) when pressed into a thin film. The very thin layer of water moisture present on most surfaces acts as an alkali, or weak base, which is the catalyst that results in bonding; however, the presence of detectable amounts of water usually degrades the performance of CAs.

INSTA-CURE™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.


many units
many units

Reviews

Customers who bought this product also purchased
XT-90  connector (pair)
XT-90 connector (pair)

many units
many units

Tap FESTO 6-6 mm
Tap FESTO 6-6 mm

many units
many units

Carbon fiber rod 1.5 mm x 1000 mm
Carbon fiber rod 1.5 mm x 1000 mm

many units
many units

Carbon fiber rod 1.0 mm x 1000 mm
Carbon fiber rod 1.0 mm x 1000 mm

many units
many units

Nut for mounting M4 (4 pcs)
Nut for mounting M4 (4 pcs)

many units
many units

Nut for mounting M3 (4 pcs)
Nut for mounting M3 (4 pcs)

many units
many units

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Ply-Span 450x600/13g White
1 x Small aluminium horn blue (2pcs)
1 x Xplorer4 anemometro
1 x Horn 5/20 with M2 Bearing
2 x 6 mm red aluminium threaded horn with patella
2 x Oratex Silver 2m
1 x Ply-Span 450x600/13g Black
1 x Horn 5/10 with M2 Bearing
1 x Horn 5/15 with M2 Bearing
1 x Oracover Verde 2 m
1 x Oracover ROYAL RED 2m
1 x Ply-Span 450x600/13g Yellow
1 x Brass control horn M2 short for wire (2 pcs)
1 x Xplorer2 anemometro
1 x Horn with ball 55x40
1 x Oracover CHROME 2m
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x MYLAR film A350 (1000x500 mm)
1 x Oratex Natural White 2m
1 x Monokote PLATINO metalizado (1.8x0.65m)
1 x Ply-Span 450x600/13g Orange
2 x Ply-Span 450x600/13g Red
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x Oracover Yellow CADMIO 2 m
1 x ORACOVER Ferrari red (2 m)
1 x Horn 16,5x20 mm (2 pcs)
1 x Small aluminium horn red (2pcs)
1 x Monokote BLUE metalizado (1.8x0.65m)
1 x Oratex White 2m
2 x Oratex Red Fokker 10 m
1 x Oracover Green10 m
1 x Oracover Yellow CUB 2 m
1 x Oratex Antik 2m
2 x ORACOVER Fluor red (2 m)
1 x Monokote BLANCO jet (1.8x0.65m)
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x Oracover Yellow CUB 10 m
1 x SlowFlyer control horn (3 pcs)
1 x Ply-Span 450x600/13g Blue
1 x Oracover Azul 2 m
1 x Oracover Brown 2 m
1 x Brass control horn M3 short for wire (2 pcs)
1 x Oracover White 2 m
1 x Oracover Azul Cielo 2 m
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Oracover Orange 2 m
1 x Oratex Yellow Cub 10 m
1 x PROFICOVER 5m
1 x Horn 6/27 with M3 Bearing
2 x Threaded coupler ALU M3 Ø 5 (2 uds)
2 x Oratex Natural White 20m
1 x LH long aluminium horn L31xH30 (2pcs)
1 x Cable control set
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Horn 6/35 with M3 Bearing
2 x ABS tube 5.0x4.0x1000 mm
1 x ABS tube 7.0x6.0x1000 mm
2 x ABS tube 9.0x8.0x1000 mm
1 x ABS tube 16.0x14.0x1000 mm
2 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
2 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x ABS tube 5.0x4.0x156 mm
2 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
2 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
2 x ABS tube 8.0x7.0x1000 mm
2 x ABS tube 12.0x10.0x1000 mm
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x CC 02
1 x 4 LiPo XH>EH adapter
1 x 2 LiPo XH>EH adapter
1 x CC 01
1 x CM-3
1 x CC 05
1 x TrainerCord (master-learner)
2 x 3 LiPo XH>EH adapter
1 x Adapter lead MPX/EC3
1 x JETImodel SINGLE BEC
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x BEC 3A FOXY
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Dean "T" - Futaba Adapter
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Ball link M2,5 (10 pcs)
1 x 3,2x1000 mm 2:1 red termoretract tube
1 x Glider Ka 7 Red (2540mm)
1 x Horn mando small (2 pcs)
1 x Brass control horn M4 long for wire (4 pcs)
1 x 20 mm carbon horn
1 x Adjustable brass horn threaded M3
1 x Oracover Yellow CADMIO 10 m
1 x PVC yellow battery termo-retract 69 mm (10 m)
1 x Support pump Xicoy X45
1 x SIG Coverall 1.2x0.9 m
1 x Papel japones 12 grs/m2 760x510 mm JAPICO
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x SIG Coverall 1.2x4.5 m
1 x PVC lilac battery termo-retract 70 mm (10 m)
1 x Tapa estado carga XT-60 (6 pcs)
1 x Support Pitot JETI
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x CC 03
1 x Oracover CARBON Metalic 1 m
1 x Xplorer3 anemometro
1 x Ferrita 27x14x7 mm
2 x Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x ABS tube 5.0x3.0x1000 mm
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x NF-3X-80 liner Kit
1 x Jet Afterburner Simulator NF-Jet3 RYS
1 x ABS angle 6,0x6,0x1000 mm
1 x Ferrita 17x10x6.5 mm
1 x EasyFLY Addon
1 x GameCommander USB Universal
1 x ABS tube 14.0x10.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x Steel Screw M1x8 (10 pcs)
1 x Rotorshape Autogyro
1 x AC-10 pre-rotacion with motor
1 x Screw M3x16
1 x Head lower part New
1 x PSC 6
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Cabling for Fox MDM1 wings
1 x Female connector for 6 pines AWG
1 x Extension 2/3 lipos JST/C
1 x Male connector for 6 pines AWG
1 x Interruptor SAFET-SWITCH 12HV Twinbatt
1 x SBEC 30 D
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Switc electronic 30 Amp
1 x Extension 2/3 lipos JST - JST/C
4,645.05EUR
Manufacturers
Manufacturer Info
BSI
Other products
Languages
Español English
Currencies