1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | 45 mm rods + T patellas set for direction control |
1 x | 140 mm rods set for direction control |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
2 x | 80 mm rods set for direction control |
1 x | Clip fixing for wing (2 pcs) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Allen wheel collar M3x3 |
1 x | Canopy Latch |
1 x | Allen wheel collar M4x6 |
1 x | Allen wheel collar M4x4 |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Cable grommet 9.5 mm (4 uds) |
2 x | 100 mm rods set for direction control |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
2 x | 45 mm rods set for direction control |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Cockpit aluminium closing |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
2 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Angled clevis with threaded rod M3 |
2 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Threaded coupler M3 (10 uds) |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Couple M4 for wire (10 pcs) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Pilot "Anthony" (Slimline) |
1 x | 1/6 Pilot "Buddy" |
1 x | 1/6 Pilot "Garry" |
1 x | 1/4 Pilot "Mike" |
1 x | Straightened threaded rod M2-1m |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
2 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
2 x | Gates hinge 30x16 mm (2 pcs) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Large flex hinge (12 uds) |
2 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Flap hinge (6 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | Long pinned hinge (12 uds) |
2 x | Small pinned hinge (12 uds) |
2 x | Micro flex hinge (12 uds) |
2 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | MAX pilot ARTF |
1 x | Shirt Hispano Aviación |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | 3,0x60 mm allen screwdriver |
1 x | Dremel 3000 130W |
1 x | Ball link M3 RPA's-UAV's |
1 x | Long ball link M1.6 (6 uds) |
1 x | Extension silicon 75 cm (Futaba) |
1 x | Set clevis for pull-pull (TY13233 & TY13234) |
1 x | Support pump Xicoy X45 |
1 x | Support pumb/filter Xicoy X45 |
2 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Pulley brass 10/2 (2 pcs) |
1 x | Pulley brass 14/2 (2 pcs) |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Z type of cable coupler Ø 1 (2 uds) |
2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | Propeller G-Sonic 20x8 |
1 x | Transmitter Crystal 35 Mc/s Ch 77 |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Threaded coupler M2 (10 uds) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | BULLIT Wing 840 mm |
1 x | Gates hinge |
1 x | AXI 2204 Multicopter |
1 x | 58 mm micro servo cover |
1 x | Long pinned hinge (6 uds) |
1 x | Helices DJI Mavic Air STEALTH "Black" (4x Ud) |
2 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | 11 mm wing servo holder |
1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Astra wing Joinner (Top Model) |
1 x | Adapter 3,0 mm M6 |
1 x | T-Motor U7-V2.0 Kv420 |
1 x | Avia spare blue cockpit (Top Model) |
1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
1 x | Adapter 2,3 mm M5 for spinner 30 mm fixed propeller |
1 x | Small flex hinge (12 uds) |
1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
1 x | Cylinder for ZG20 |
1 x | Spring clamp for tube Ø50 mm |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 54 mm |
1 x | Piston ring for ZG 20 and G240RC |
2 x | Miniature brass strap hinge, 1 m |
1 x | Propeller set 400 (2R+2L) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
1 x | Medium pin type hinge (12 uds) |
1 x | Avia spare fouselage CF reinforced (Top Model) |
1 x | ESC ALPHA 60A HV |
1 x | Avia (Top Model) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Albatros ,spare fuselage (Top Model) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
1 x | Bidule 170 ARF 3.48 m |
1 x | 90x60 mm standart servo cover |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
2 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Bidule 55 V3 2460 mm |
1 x | Bidule 111 3000 mm |
1 x | FA27.2×8.9 Prop-2PCS/PAIR |
1 x | Adapter 4,0 mm M8 |
1 x | Albatros ,spare cockpit (Top Model) |
|
6,557.47EUR |