Top » Catalog » Hardware » Power supply system/Data Recordi » Emcotec » EMCA11053

79.00EUR

DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
[EMCA11053]

DPSI Micro - DualBat 5.9V / 7.2V (Dual Power Supply Interface - Regulated Voltage) MPX-JR
Enhanced successor of the popular DPSI Micro - DPSI RV!

Fetures:
- Dual power supply for 5/6cell NiCad/NiMH as well as LiIon/LiPo and LiFePo4 batteries.
- Regulated and stabilized output voltage 5.9 volts or 7.2 volts adjustable.
- NEW: Optimally suitable for the new 7.4V servo generation!
- Dual electronically On/Off-switch as well as high performance voltage regulator with high current pulse solidity.
- Complete contact less switching operation with an external magnet from outside - no ugly holes in the fuselage anymore!
- Intelligent voltage monitoring with optical error indication and battery fail recognition.
- Suitable for all battery types due to low drop out technology.
- The used battery type can easily be programmed (and therefore correct low voltage detection).
- Battery connector cable: JR/Uni with high flexible silicone strand (0.5 mm2 cross section).
- NEW: Dual JR/Uni connectors with high grade silicone strand (0.5 mm2 cross section) on output side.
- All connectors are gold plated (FCI contacts).
- Suitable for small models (F3A, helicopters, gliders).
- Designed for 5 up to a max. of 10 servos.
- NEW: now supports 4A continuous current and allows for 25A peak current.

- Delivery includes magnetic switch actuator with keyring pendant , 2 pcs. spare part magnets, screws, sticker for the fuselage (drilling jig), EMCOTEC 3D sticker, operating instructions

temporarily out of stock

Reviews

Customers who bought this product also purchased

Connectors MPX male temporarily out of stock	Connectors MPX female temporarily out of stock	Tygon tube 6.35 - 3.18 mm 1m temporarily out of stock
Connectors MPX black female temporarily out of stock	4,8x1000 mm 2:1 black termoretract tube temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm)
22.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	Profile ABS Square 2 x 1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	L-Connector 4.0 mm x 1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	ABS angle 6,0x6,0x1000 mm
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	Profile ABS Square 4 x 1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Servo NARO Max Std
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Squared carbon wing joinner 5x5x220 mm
2 x	Aceite DELUXE turbine Jet Oil 1 litro
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Xplorer4 anemometro
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Hot Glue Stick RED
1 x	AC-10 pre-rotacion with motor
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
2 x	Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x	Xplorer2 anemometro
1 x	Ball Link Plier
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	PIX Hawk with accesories
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Vacuum bag, 1200 mm x 50 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
2 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Straightened threaded rod M3 - 1m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Ball link M3 (10 pcs, flat ball)
1 x	Connectors DEANS (T)
1 x	Covered closure or fairings
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Profile ABS triangular 6.0x1000 mm 90º
1 x	Mudguard wheels 112/127 mm
1 x	Mini neumatic retract 3 mm landing gear (Het-rc)
1 x	Suncover 100cc Red
1 x	Profile ABS half cane 5.0x1000 mm
1 x	Indoor landing gear set
1 x	Metal ring front FEMA
1 x
1 x	Hose connector stopper 4 mm
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Support pumb/filter Xicoy X45
1 x	Fail Safe air retract
1 x	Nylon gear block Ø 5 mm (2 uds)
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	Quick hose connector 3-3 mm
1 x	40 mm air cylinder
1 x	Motor OS 3820-1200 electric
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	51 mm INO spinner (carbon imitation)
1 x	Charger SKY RC D200 neo
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Dust collector for mould cleaning
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Male connector for 20 pines AWG
1 x	Connectors MPX female
1 x	89 mm INO spinner (carbon imitation)
1 x	Female connector for 6 pines AWG
1 x	Partall paste 650 g
1 x	Spinner 90 mm GFK
1 x	89 mm aluminium spinner.
1 x	102 mm aluminium spinner
1 x	90 mm CFK long Spinner fixed by a central screw
1 x	76 mm aluminium spinner.
1 x	82 mm aluminium spinner.
1 x	Combo FOXY C3530-700 + FOXY 80 amp
1 x	Xplorer3 anemometro
1 x	Spinner 80 mm GFK
1 x	Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Female connector for 16 pines AWG
1 x	Spinner 102 mm
1 x	Spinner INO 51 mm Chrome (Imitacion metal)
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Spinner Alumin. fixed propeller 50 mm / 6,0 mm
1 x	82 mm INO spinner (carbon imitation)
1 x	Digital precision scale up to 2000 g

6,991.59EUR